Prof. Alberto CARPINTERI
Ordinario di Scienza delle Costruzioni
Dipartimento di Ingegneria Strutturale, Edile e Geotecnica
 Politecnico di Torino, 10129 - Torino

                                                                                                                                                                                                  

Loading search bar
ARTICOLI SU RIVISTE INTERNAZIONALI

ANNO 1979

4.

A. Carpinteri, A. Di Tommaso, E. Viola, "Collinear stress effect on the crack branching phenomenon", Materials and Structures (RILEM), Vol. 12 (1979), 439-446.

ANNO 1980

10.

A. Carpinteri, E. Lorenzini, "Thermal shock in a nuclear fuel element with cladding", Nuclear Engineering and Design, Vol. 61 (1980), 1-12.

ANNO 1981

17.

A. Carpinteri, "Static and energetic fracture parameters for rocks and concretes", Materials and Structures (RILEM), Vol. 14 (1981), 151-162.

18.

M. Spiga, A. Carpinteri, "Some notes on thermo-mechanical design of nuclear structural components", Res Mechanica Letters, Vol. 1 (1981), 503-510.

ANNO 1982

23.

A. Carpinteri, "Notch sensitivity in fracture testing of aggregative materials", Engineering Fracture Mechanics, Vol. 16 (1982), 467-481.

24.

A. Carpinteri, "Application of fracture mechanics to concrete structures", Journal of the Structural Division (ASCE), Vol. 108 (1982), 833-848.

25.

A. Carpinteri, "Sensitivity and stability of progressive cracking in plain and reinforced cement composites", The International Journal of Cement Composites and Lightweight Concrete, Vol. 4 (1982), 47-56.

ANNO 1983

30.

A. Carpinteri, "Stiffness loss and fracture resistance of a cracked beam with circular cross-section", Meccanica, Vol. 18 (1983), 156-162.

31.

A. Carpinteri, "Plastic flow collapse vs. separation collapse in elastic-plastic strain-hardening structures", Materials and Structures (RILEM), Vol. 16 (1983), 85-96.

32.

A. Carpinteri, M. Spiga, "Stability of brittle fracture in thermally loaded pressure vessels", Transactions of the 7th International Conference on Structural Mechanics in Reactor Technology, Chicago, USA, 1983, H5/9; Res Mechanica, Vol. 15 (1985), 247-257.

ANNO 1984

35.

A. Carpinteri, G. C. Sih, "Damage accumulation and crack growth in bilinear materials with softening: Application of strain energy density theory", Theoretical and Applied Fracture Mechanics, Vol. 1 (1984), 145-159.

36.

A. Carpinteri, "Size effects in material strength due to crack growth and material non-linearity", Theoretical and Applied Fracture Mechanics, Vol. 2 (1984), 39-46.

37.

A. Carpinteri, "Stability of fracturing process in R.C. beams", Journal of Structural Engineering (ASCE), Vol. 110 (1984), 544-558.

38.

Alberto Carpinteri, Andrea Carpinteri, "Hysteretic behavior of R.C. beams", Journal of Structural Engineering (ASCE), Vol. 110 (1984), 2073-2084.

39.

M. Spiga, A. Carpinteri, "Three-dimensional thermoelastic analysis of a semi-infinite solid with arbitrary heat supply", Ingenieur-Archiv, Vol. 54 (1984), 253-258.

ANNO 1985

44.

A. Carpinteri, C. Marenga, A. Savadori, "Ductile-brittle transition by varying structural size", Engineering Fracture Mechanics, Vol. 21 (1985), 263-271.

45.

Alberto Carpinteri, Andrea Carpinteri, "Lateral loading distribution between the elements of a three-dimensional civil structure", Computers & Structures, Vol. 21 (1985), 563-580.

ANNO 1986

53.

A. Carpinteri, "Crack problems in large reinforced concrete structures subjected to thermal loading", Heat & Technology, Vol. 4 (1986), 20-32.

54.

A. Carpinteri, C. Marenga, A. Savadori, "Size effects and ductile-brittle transition of polypropylene", Journal of Materials Science, Vol. 21 (1986), 4173-4178.

56.

A. Carpinteri, "Linear elastic fracture mechanics as a limit-case of strain-softening instability", Atti dell'8° Congresso Nazionale di Meccanica Teorica ed Applicata (AIMETA), Torino, Italy, 1986, Vol. 1, 313-318; Meccanica, Vol. 23 (1988), 160-165.

ANNO 1987

57.

A. Carpinteri, "Stress-singularity and generalized fracture toughness at the vertex of re-entrant corners", Engineering Fracture Mechanics, Vol. 26 (1987), 143-155.

ANNO 1988

63.

A. Carpinteri, "Interaction between tensile strength failure and mixed mode crack propagation in concrete", Materials and Structures (RILEM), Vol. 21 (1988), 403-409.

64.

A. Carpinteri, "Snap-back and hyperstrength in lightly reinfoced concrete beams", Magazine of Concrete Research, Vol. 40 (1988), 209-215.

ANNO 1989

71.

L. Biolzi, S. Cangiano, G. Tognon, A. Carpinteri, "Snap-back softening instability in high strength concrete beams", Materials and Structures (RILEM), Vol. 22 (1989), 429-436.

72.

P. Bocca, S. Cangiano, A. Carpinteri, S. Valente, "Fracture mechanics of brick masonry: Size effects and snap-back analysis", Materials and Structures (RILEM), Vol. 22 (1989), 364-373.

73.

A. Carpinteri, "Post-peak and post-bifurcation analysis of cohesive crack propagation", Engineering Fracture Mechanics, Vol. 32 (1989), 265-278.

74.

A. Carpinteri, "Size effects on strength, toughness and ductility", Journal of Engineering Mechanics (ASCE), Vol. 115 (1989), 1375-1392.

75.

A. Carpinteri, G. Colombo, "Numerical analysis of catastrophic softening behaviour (snap-back instability)", Computers & Structures, Vol. 31 (1989), 607-636.

76.

A. Carpinteri, "Cusp catastrophe interpretation of fracture instability", Journal of the Mechanics and Physics of Solids, Vol. 37 (1989), 567-582.

77.

A. Carpinteri, "Decrease of apparent tensile and bending strength with specimen size: Two different explanations based on fracture mechanics", International Journal of Solids and Structures, Vol. 25 (1989), 407-429.

78.

A. Carpinteri, "Softening and snap-back instability in cohesive solids", International Journal for Numerical Methods in Engineering, Vol. 28 (1989), 1521-1537.

79.

A. Carpinteri, S. Valente, "Analysis of mixed mode fracture in concrete – Discussion on a paper by J.G. Rots and R. de Borst", Journal of Engineering Mechanics (ASCE), Vol. 115 (1989), 2344-2347.

ANNO 1990

94.

P. Bocca, A. Carpinteri, "Snap-back fracture instability in rock specimens: Experimental detection through a negative impulse", Engineering Fracture Mechanics, Vol. 35 (1990), 241-250.

95.

P. Bocca, A. Carpinteri, S. Valente, "Size effects in the mixed mode crack propagation: Softening and snap-back analysis", Engineering Fracture Mechanics, Vol. 35 (1990), 159-170.

96.

E. Ballatore, A. Carpinteri, G. Faerrara, G. Melchiorri, "Mixed mode fracture energy of concrete", Engineering Fracture Mechanics, Vol. 35 (1990), 145-157.

97.

C. Bosco, A. Carpinteri, P. G. Debernardi, "Fracture of reinforced concrete: Scale effects and snap-back instability", Engineering Fracture Mechanics, Vol. 35 (1990), 665-677.

98.

C. Bosco, A. Carpinteri, P. G. Debernardi, "Minimum reinforcement in high strength concrete", Journal of Structural Engineering (ASCE), Vol. 116 (1990), 427-437.

99.

A. Carpinteri, "A catastrophe theory approach to fracture mechanics", International Journal of Fracture, Vol. 44 (1990), 57- 69.

ANNO 1991

108.

P. Bocca, A. Carpinteri, S. Valente, "Mixed mode fracture of concrete", International Journal of Solids and Structures, Vol. 27 (1991), 1139-1153.

109.

A. Carpinteri, "Size-scale transition from ductile to brittle failure: Structural response vs. crack growth resistance curve", International Journal of Fracture, Vol. 51 (1991), 175-186.

ANNO 1992

116.

C. Bosco, A. Carpinteri, "Fracture behavior of beam cracked across reinforcement", Theoretical and Applied Fracture Mechanics, Vol. 17 (1992), 61-68.

117.

C. Bosco, A. Carpinteri, "Softening and snap-through behavior of reinforced elements", Journal of Engineering Mechanics (ASCE), Vol. 118 (1992), 1564-1577.

ANNO 1993

126.

A. Carpinteri, S. Valente, G. Faerrara, G. Melchiorri, "Is mode II fracture energy a real material property?", Computers & Structures, Vol. 48 (1993), 397-413.

127.

A. Carpinteri, C. Scavia, "Energy dissipation due to frictional shake-down on a closed crack subjected to shear", Meccanica, Vol. 28 (1993), 347-352.

128.

B. L. Karihaloo, A. Carpinteri, M. Elices, "Fracture mechanics of cement mortar and plain concrete", Advanced Cement Based Materials, Vol. 1 (1993), 92-105.

ANNO 1994

136.

A. Carpinteri, "Fractal nature of material microstructure and size effects on apparent mechanical properties", Mechanics of Materials, Vol. 18 (1994), 89-101; Internal Report, Laboratory of Fracture Mechanics, Politecnico di Torino, N. 1/92, 1992.

137.

A. Carpinteri, "Scaling laws and renormalization groups for strength and toughness of disordered materials", International Journal of Solids and Structures, Vol. 31 (1994), 291-302.

138.

A. Carpinteri, G. Ferro, "Size effects on tensile fracture properties: A unified explanation based on disorder and fractality of concrete microstructure", Materials and Structures (RILEM), Vol. 27 (1994), 563-571.

139.

A. Carpinteri, G. Ferrara, L. Imperato, "Scaling laws for strength and toughness of disordered materials: A unified theory based on fractal geometry", Engineering Fracture Mechanics, Vol. 48 (1994), 673-689.

ANNO 1995

147.

A. Carpinteri, B. Chiaia, G. Ferro, "Size effects on nominal tensile strength of concrete structures: Multifractality of material ligaments and dimensional transition from order to disorder", Materials and Structures (RILEM), Vol. 28 (1995), 311-317.

148.

A. Carpinteri, B. Chiaia, "Multifractal nature of concrete fracture surfaces and size effects on nominal fracture energy", Materials and Structures (RILEM), Vol. 28 (1995), 435-443.

149.

A. Carpinteri, F. Maradei, "Three-jack solution to obtain a truly stable and symmetric tensile concrete test", Experimental Mechanics, Vol. 35 (1995), 19-23.

150.

C. Bosco, A. Carpinteri, "Discontinuous constitutive response of brittle matrix fibrous composites", Journal of the Mechanics and Physics of Solids, Vol. 43 (1995), 261-274.

151.

A. Carpinteri, "Scaling laws and renormalization groups for strength and toughness of disordered materials – Author’s closure to a letter by Chunsheng Lu to the Editor", International Journal of Solids and Structures, Vol. 32 (1995), 3373-3375.

ANNO 1996

166.

A. Carpinteri, B. Chiaia, "Crack-resistance behavior as a consequence of self-similar fracture topologies", International Journal of Fracture, Vol. 76 (1996), 327-340.

167.

A. Brencich, A. Carpinteri, "Interaction of a main crack with ordered distributions of microcracks: A numerical technique by displacement discontinuity boundary elements", International Journal of Fracture, Vol. 76 (1996), 373-389.

168.

A. Carpinteri, R. Massabò, "Bridged versus cohesive crack in the flexural behavior of brittle-matrix composites", International Journal of Fracture, Vol. 81 (1996), 125-145.

169.

A. Carpinteri, G. P. Yang, "Fractal dimension evolution of microcrack net in disordered materials", Theoretical and Applied Fracture Mechanics, Vol. 25 (1996), 73-81.

170.

A. Carpinteri, C. Scavia, G. P. Yang, "Microcrack propagation, coalescence and size effects in compression", Engineering Fracture Mechanics, Vol. 54 (1996), 335-347.

171.

A. Carpinteri, B. Chiaia, "Size effects on concrete fracture energy: Dimensional transition from order to disorder", Materials and Structures (RILEM), Vol. 29 (1996), 259-266.

172.

A. Carpinteri, B. Chiaia, "Power scaling laws and dimensional transitions in solid mechanics", Chaos, Solitons & Fractals, Vol. 7 (1996), 1343-1364.

ANNO 1997

181.

A. Carpinteri, G. Ferro, S. Invernizzi, "The nominal tensile strength of disordered materials: A statistical fracture mechanics approach", Engineering Fracture Mechanics, Vol. 58 (1997), 421-435.

182.

A. Carpinteri, B. Chiaia, K. M. Nemati, "Complex fracture energy dissipation in concrete under different loading conditions", Mechanics of Materials, Vol.26 (1997), 93-108.

183.

A. Carpinteri, B. Chiaia, P. Bocca, "Size-dependence of strength and fracture properties of brick masonry walls", Journal of Engineering Mechanics (ASCE), Vol. 123 (1997), 816-822.

184.

A. Carpinteri, B. Chiaia, "Multifractal scaling laws in the breaking behavior of disordered materials", Chaos, Solitons & Fractals, Vol. 8 (1997), 135-150.

185.

A. Carpinteri, B. Chiaia, G. Ferro, "A new explanation for size effects on the flexural strength of concrete", Magazine of Concrete Research, Vol. 49 (1997), 45-53.

186.

A. Carpinteri, G. P. Yang, "The damage process in a finite-sized brittle specimen with interacting microcracks", International Journal of Fatigue & Fracture of Engineering Materials and Structures, Vol. 20 (1997), 1105-1115.

187.

A. Carpinteri, G. P. Yang, "Size effects in brittle specimen with microcrack interaction", Computers & Structures, Vol. 63 (1997), 429-437.

188.

A. Carpinteri, S. Valente, F. P. Zhou, G. Ferrara, G. Melchiorri, "Tensile and flexural creep rupture tests on partially-damaged concrete specimens", Materials and Structures (RILEM), Vol. 30 (1997), 269-276.

189.

A. Carpinteri, R. Massabò, "Continuous vs discontinuous bridged crack model of fiber-reinforced materials in flexure", International Journal of Solids and Structures, Vol. 34 (1997), 2321-2338.

190.

A. Carpinteri, R. Massabò, "Reversal in failure scaling transition of fibrous composites", Journal of Engineering Mechanics (ASCE), Vol. 123 (1997), 107-114.

ANNO 1998

201.

A. Brencich, A. Carpinteri, "Stress field interaction and strain energy distribution between a stationary main crack and its process zone", Engineering Fracture Mechanics, Vol. 59 (1998), 797-814.

202.

A. Carpinteri, G. Ferro, "Scaling behaviour and dual renormalization of experimental tensile softening responses", Materials and Structures (RILEM), Vol. 31 (1998), 303-309.

203.

A. Carpinteri, F. Ciola, "Influence of cracking on tensile behavior of brittle materials", Theoretical and Applied Fracture Mechanics, Vol. 29 (1998), 67-74.

204.

A. Carpinteri, B. Chiaia, G. Ferro, "Scale dependence of tensile strength of concrete specimens: A multifractal approach", Magazine of Concrete Research, Vol. 50 (1998), 237-246.

205.

A. Carpinteri, B. Chiaia, P. Bocca, "Size-dependence of strength and fracture properties of brick masonry walls – Authors’ closure to a letter by Z.P. Bazant to the Editor", Journal of Engineering Mechanics (ASCE), Vol. 124 (1998), 1300-1301.

206.

A. Carpinteri, B. Chiaia, "A fractal model for simulating the formation of microcracks in the fracture process zone and a theoretical explanation of the size effect of the fracture energy of concrete – Discussion on a paper by X.H. Ji, S.Y.N. Chan and N.Q. Feng", Magazine of Concrete Research, Vol. 50 (1998), 369-370.

ANNO 1999

221.

A. Carpinteri, G. Ferro, I. Monetto, "Scale effects in uniaxially compressed concrete specimens", Magazine of Concrete Research, Vol. 51 (1999), 217-225.

222.

M. Borri-Brunetto, A. Carpinteri, B. Chiaia, "Scaling phenomena due to fractal contact in concrete and rock fractures", International Journal of Fracture, Vol. 95 (1999), 221-238.

223.

A. Carpinteri, B. Chiaia, S. Invernizzi, "Three-dimensional fractal analysis of concrete fracture at the meso-level", Theoretical and Applied Fracture Mechanics, Vol. 31 (1999), 163-172.

224.

A. Carpinteri, I. Monetto, "Snap-back analysis of fracture evolution in multi-cracked solids using boundary element method", International Journal of Fracture, Vol. 98 (1999), 225-241.

225.

A. Carpinteri, G. Ferro, "Anomalous and irregular mechanical behaviour in heterogeneous materials: Snap-back instabilities and fractal cracking", Journal of the Mechanical Behavior of Materials, Vol. 11 (1999), 23-29.

ANNO 2000

240.

A. Brencich, A. Carpinteri, "A heuristic approach to microcracking and fracture for ceramics with statistical consideration", Theoretical and Applied Fracture Mechanics, Vol. 33 (2000), 135-143.

241.

A. Carpinteri, F. Ciola, "Influence of damage and disorder on structural response of quasi-brittle materials", Mechanics of Cohesive-Frictional Materials, Vol. 5 (2000), 255-262.

242.

A. Carpinteri, B. Chiaia, S. Invernizzi, "Direct fractal measurement of fracture surfaces – Letter to the Editor and comments on a paper by H. Xie and J. Wang", International Journal of Solids and Structures, Vol. 37 (2000), 4623-4625.

243.

A. Carpinteri, G. Ferro, I. Monetto, "Scale effects in uniaxially compressed concrete specimens – Authors' closure to a letter by E. Arioglu, N. Arioglu and C. Girgin to the Editor", Magazine of Concrete Research, Vol. 52 (2000), 395-398.

ANNO 2001

252.

A. Konstantinidis, G. Frantziskonis, A. Carpinteri, E. C. Aifantis, "Size effects on tensile strength and fracture energy in concrete: Wavelet vs. fractal approach", Journal of the Mechanical Behavior of Materials, Vol. 12 (2001), 63-75.

253.

G. Efraimidis, A. Carpinteri, E. C. Aifantis, "Griffith’s theory versus gradient elasticity in the evaluation of porous materials tensile strength", Journal of the Mechanical Behavior of Materials, Vol. 12 (2001), 95-105.

254.

G. Efraimidis, A. Carpinteri, E. C. Aifantis, "Multifractal scaling law versus gradient elasticity in the evaluation of disordered materials compressive strength", Journal of the Mechanical Behavior of Materials, Vol. 12 (2001), 107-120.

255.

A. Carpinteri, F. Ciola, N. Pugno, "Boundary element method for the strain-softening response of quasi-brittle materials in compression", Computers & Structures, Vol. 79 (2001), 389-401.

256.

A. Carpinteri, F. Ciola, N. Pugno, G. Ferrara, M. E. Gobbi, "Size-scale and slenderness influence on the compressive strain-softening behaviour of concrete", International Journal of Fatigue & Fracture of Engineering Materials and Structures, Vol. 24 (2001), 441-450.

257.

A. Carpinteri, S. Invernizzi, "Influence of damage on the fractal properties of concrete subjected to pure tension", Materials and Structures (RILEM), Vol. 34 (2001), 605-611.

258.

A. Carpinteri, B. Chiaia, P. Cornetti, "Static-kinematic duality and the principle of virtual work in the mechanics of fractal media", Computer Methods in Applied Mechanics and Engineering, Vol. 191 (2001), 3-19.

259.

A. Carpinteri, G. Ferro, G. Ventura, "An Augmented Lagrangian Element-Free (ALEF) approach for crack discontinuities", Computer Methods in Applied Mechanics and Engineering, Vol. 191 (2001), 941-957.

260.

A. Carpinteri, G. Lacidogna, "Monitoraggio di un edificio in muratura con il metodo delle emissioni acustiche", Costruire in Laterizio, Vol. 79 (2001), 62-65.

ANNO 2002

283.

A. Carpinteri, B. Chiaia, S. Invernizzi, "Applications of fractal geometry and renormalization group to the italian seismic activity", Chaos, Solitons & Fractals, Vol. 14 (2002), 917-928.

284.

A. Carpinteri, B. Chiaia, P. Cornetti, "A scale-invariant cohesive crack model for quasi-brittle materials", Engineering Fracture Mechanics, Vol. 69 (2002), 207-217.

285.

A. Carpinteri, P. Cornetti, "A fractional calculus approach to the description of stress and strain localization in fractal media", Chaos, Solitons & Fractals, Vol. 13 (2002), 85-94.

286.

A. Carpinteri, P. Cornetti, "Size effects on concrete tensile fracture properties: An interpretation of the fractal approach based on the aggregate grading", Journal of the Mechanical Behavior of Materials, Vol. 13 (2002), 233-246.

287.

A. Carpinteri, G. Ferro, G. Ventura, "The partition of unity quadrature in meshless methods", International Journal for Numerical Methods in Engineering, Vol. 54 (2002), 987-1006.

288.

N. Pugno, A. Carpinteri, "Strength, stability and size effects in the brittle behaviour of bonded joints under torsion: Theory and experimental assessment", International Journal of Fatigue & Fracture of Engineering Materials & Structures, Vol. 25 (2002), 55-62.

289.

A. Carpinteri, N. Pugno, "A fractal comminution approach to evaluate the drilling energy dissipation", International Journal of Numerical and Analytical Methods in Geomechanics, Vol. 26 (2002), 499-513.

290.

A. Carpinteri, N. Pugno, "Fractal fragmentation theory for shape effects of quasi-brittle materials in compression", Magazine of Concrete Research, Vol 54 (2002), 473-480.

291.

A. Carpinteri, N. Pugno, "One-, two- and three-dimensional universal laws for fragmentation due to impact and explosion", Journal of Applied Mechanics, Vol. 69 (2002), 854-856.

ANNO 2003

307.

A. Carpinteri, N. Pugno, "A multifractal comminution approach for drilling scaling laws", Powder Technology, Vol. 131 (2003), 93-98.

308.

N. Pugno, A. Carpinteri, Tubular adhesive joints under axial load, Journal of Applied Mechanics, Vol. 70 (2003), 832-839.

309.

A. Carpinteri, G. Ferro, G. Ventura, "Size effects on flexural responce of reinforced concrete elements with a nonlinear matrix", Engineering Fracture Mechanics, Vol. 70 (2003), 995-1013.

310.

A. Carpinteri, G. Ferro, G. Ventura, "The partition of unity quadrature in element-free crack modelling", Computers & Structures, Vol. 81 (2003), 1783-1794.

311.

A. Carpinteri, G. Lacidogna, "Damage diagnostics in concrete and masonry structures by acoustic emission technique", Facta Universitatis, Vol. 13 (2003), 755-764.

312.

A. Carpinteri, P. Cornetti, F. Barpi, S. Valente, "Cohesive crack model description of ductile to brittle size-scale transition: Dimensional analysis vs. renormalization group theory", Engineering Fracture Mechanics, Vol. 70 (2003), 1809-1839.

313.

A. Carpinteri, B. Chiaia, P. Cornetti, "On the mechanics of quasi-brittle materials with a fractal microstructure", Engineering Fracture Mechanics, Vol. 70 (2003), 2321-2349.

314.

M. Borri-Brunetto, A. Carpinteri, S. Invernizzi, "Characterization and mechanical modeling of the abrasion properties of sintered tools with embedded hard particles", Wear, Vol. 254 (2003), 635-644.

315.

A. Carpinteri, B. L. Karihaloo (Guest Editorial), "Foreword: Size-Scale effects", Engineering Fracture Mechanics, Vol. 70 (2003), 2255.

ANNO 2004

325.

A. Carpinteriet al, "Quasibrittle fracture scaling and size effect", Materials and Structures (RILEM), Vol. 37 (2004), 547-568.

326.

A. Carpinteri, P. Cornetti, K. M. Kolwankar, "Calculation of the tensile and flexural strength of disordered materials using fractional calculus", Chaos, Solitons & Fractals, Vol. 21 (2004), 623-632.

327.

A. Carpinteri, P. Cornetti, S. Puzzi, "A stereological analysis of aggregate grading and size effect on concrete tensile strength", International Journal of Fracture, Vol. 128 (2004), 233-242; in Fracture at Multiple Dimensions (Proceedings of an Interquadrennial ICF Conference, Moscow, Russia, 2003), CD-ROM, Paper N. 15.

328.

A. Carpinteri, B. Chiaia, P. Cornetti, "A disordered microstructure material model based on fractal geometry and fractional calculus", Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 84 (2004), 128-135.

329.

A. Carpinteri, B. Chiaia, P. Cornetti, "A fractal theory for the mechanics of elastic materials", Materials Science & Engineering - A, Vol. 365 (2004), 235-240.

330.

A. Carpinteri, B. Chiaia, P. Cornetti, "The elastic problem for fractal media: Basic theory and finite element formulation", Computer & Structures, Vol. 82 (2004), 499-508.

331.

A. Carpinteri, B. Chiaia, P. Cornetti, "Numerical modelization of disordered media via fractional calculus", Computational Material Science, Vol. 30 (2004), 155-162.

332.

A. Carpinteri, B. Chiaia, P. Cornetti, "A mesoscopic theory of damage and fracture in heterogeneous materials", Theoretical and Applied Fracture Mechanics, Vol. 41 (2004), 43-50; in Advances in Fracture Research (Proceedings of the 10th International Conference on Fracture, Honolulu-Hawaii, USA, 2001), Eds. K. Ravi Chandar et al., Elsevier Science, Oxford (2001), CD-ROM, Paper N. 128OR.

333.

A. Carpinteri, B. Chiaia, S. Invernizzi, "Numerical analysis of indentation fracture in quasi-brittle materials", Engineering Fracture Mechanics, Vol. 71 (2004), 567-577.

334.

M. Borri-Brunetto, A. Carpinteri, B. Chiaia, "The effect of scale and criticality in rock slope stability", Rock Mechanics and Engineering, Vol. 37 (2004), 117-126.

335.

A. Carpinteri, G. Ferro, G. Ventura, "Double brittle-to-ductile transition in bending of fibre reinforced concrete beams with rebars", International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 28 (2004), 737-756.

336.

A. Carpinteri, N. Pugno, "Scaling laws for fragmentation energy dissipation in impacts and explosions", Mechanics, Vol. 33 (2004), 1-10.

337.

A. Carpinteri, N. Pugno, "Evolutionary fractal theory of erosion and experimental assessment on MIR space station", Wear, Vol. 257 (2004), 408-413.

338.

A. Carpinteri, N. Pugno, "Transient coupled theory of drilling and wear", International Journal of Mechanics and Control, Vol. 5 (2004), 57-64.

339.

A. Carpinteri, N. Pugno, "Scale-effects on mean and standard deviation of the mechanical properties of condensed matter: An energy-based unified approach", International Journal of Fracture, Vol. 128 (2004), 253-261; in Fracture at Multiple Dimensions (Proceedings of an Interquadrennial ICF Conference, Moscow, Russia, 2003), CD ROM, Paper N. 14.

340.

A. Carpinteri, G. Lacidogna, N. Pugno, "Scaling of energy dissipation in crushing and fragmentation: A fractal and statistical analysis based on particle size distribution", International Journal of Fracture, Vol. 129 (2004), 131-139.

341.

A. Carpinteri, G. Lacidogna, N. Pugno, "A fractal approach for damage detection in concrete and masonry structures by acoustic emission technique", Acoustique et Techniques, Vol. 38 (2004), 31-37; in Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques (Proceedings of the 5th International Conference CETIM, Senlis, France, 2004), CD-ROM, Paper N. 5.

342.

A. Carpinteri, L. Dimastrogiovanni, N. Pugno, "Experimental investigation on fractal drilling strength", Strength, Fracture and Complexity, Vol. 2 (2004), 1-10.

ANNO 2005

357.

A. Carpinteri, L. Dimastrogiovanni, N. Pugno, "Fractal coupled theory of drilling and wear", International Journal of Fracture, Vol. 131 (2005), 131-142.

358.

A. Carpinteri, N. Pugno, "Fracture instability and limit strength condition in structures with re-entrant corners", Engineering Fracture Mechanics, Vol. 72 (2005), 1254-1267.

359.

A. Carpinteri, N. Pugno, "Fractal fragmentation theory for size effects of quasi-brittle materials in compression", Magazine of Concrete Research, Vol. 57 (2005), 309-313.

360.

A. Carpinteri, N. Pugno, "Are scaling laws on strength of solids related to mechanics or to geometry?", Nature Materials, Vol. 4 (2005), 421-423.

361.

A. Carpinteri, N. Pugno, "Strength and toughness of micro- and nano-structured materials: Unified influence of composition, grain size and structural dimension", Review on Advanced Materials Science, Vol. 10 (2005), 320-324.

362.

A. Carpinteri, N. Pugno, "Towards chaos in vibrating damaged structures – Part I: Theory and period doubling", Journal of Applied Mechanics, Vol. 72 (2005), 511-518.

363.

A. Carpinteri, N. Pugno, "Towards chaos in vibrating damaged structures – Part II: Parametrical investigation", Journal of Applied Mechanics, Vol. 72 (2005), 519-526.

364.

A. Carpinteri, N. Pugno, "Fractal rules of mixture for multi-scale fragmentation of heterogeneous materials", International Journal of Mechanics and Control, Vol. 6 (2005), 31-37.

365.

A. Carpinteri, G. Lacidogna, N. Pugno, "Time-scale effects during damage evolution: A fractal approach based on acoustic emission", Strength, Fracture and Complexity, Vol. 3 (2005), 127-135.

366.

A. Carpinteri, G. Lacidogna, N. Pugno, "Time scale effects on acoustic emission due to elastic waves propagation in monitored cracking structures", Physical Mesomechanics, Vol. 8 (2005), 77-80; Proceedings of the 11th International Conference on Fracture (ICF), Torino, Italy, 2005, CD-ROM, Paper N. 5509; Atti del 17° Convegno Nazionale del Gruppo Italiano Frattura (IGF), Bologna, Italy, 2004, 107-112.

367.

A. Carpinteri, S. Invernizzi, "Numerical analysis of the cutting interaction between indenters acting on disordered materials", International Journal of Fracture, Vol. 131 (2005), 143-154.

368.

A. Carpinteri, S. Invernizzi, G. Lacidogna, "In situ damage assessment and nonlinear modelling of an historical masonry tower", Engineering Structures, Vol. 27 (2005), 387-395.

369.

A. Carpinteri, M. Paggi, G. Zavarise, "Snap-back instability in micro-structured composites and its connection with superplasticity", Strength, Fracture and Complexity, Vol. 3 (2005), 61-72.

370.

A. Carpinteri, M. Paggi, "Size-scale effects on the friction coefficient", International Journal of Solids and Structures, Vol. 42 (2005), 2901-2910.

371.

A. Carpinteri, M. Paggi, "On the asymptotic stress field in angularly nonhomogeneous materials", International Journal of Fracture, Vol. 135 (2005), 267-283.

372.

A. Carpinteri, S. Puzzi, "The crack surface anomalous scaling and its connection with the size-scale effects", International Journal of Fracture, Vol. 133 (2005), 43-60.

373.

A. Carpinteri, P. Cornetti, S. Puzzi, "Scale effects on strength and toughness of grained materials: An extreme value theory approach", Strength, Fracture and Complexity, Vol. 3 (2005), 175-188.

374.

A. Carpinteri, P. Cornetti, S. Puzzi, "Size effect upon grained materials tensile strength: The increase of the statistical dispersion at the smaller scales", Theoretical and Applied Fracture Mechanics, Vol. 44 (2005), 192-199.

375.

A. Carpinteri (Guest Editorial), "Special issue: Selected papers from the 11th International Conference on Fracture, 21-25 March 2005, Torino, Italy", Strength, Fracture and Complexity, Vol. 3 (2005), 49-50.

ANNO 2006

397.

A. Carpinteri, M. Paggi, "Influence of the intermediate material on the singular stress field in tri-material junctions", Materials Science, Vol. 42 (2006), 95-101; Physico-Chemical Mechanics of Materials, Vol. 1 (2006), 90-95; Proceedings of the 11th International Conference on Fracture (ICF), Torino, Italy, 2005, CD-ROM, Paper N. 4988; Atti del 17° Convegno Nazionale del Gruppo Italiano Frattura (IGF), Bologna, Italy, 2004, 263-268.

398.

A. Carpinteri, M. Paggi, N. Pugno, "Numerical evaluation of generalized stress-intensity factors in multi-layered composites", International Journal of Solids and Structures, Vol. 43 (2006), 627-641.

399.

A. Carpinteri, M. Paggi, N. Pugno, "An analytical approach for fracture and fatigue in functionally graded materials", International Journal of Fracture, Vol. 141 (2006), 535-547.

400.

A. Carpinteri, S. Puzzi, "A fractal approach to indentation size effect", Engineering Fracture Mechanics, Vol. 73 (2006), 2110-2122.

401.

A. Carpinteri, S. Puzzi, "Fracture mechanics and complexity sciences – Part I. Order emerging from complex systems: Fractals and renormalization group", Strength, Fracture and Complexity, Vol. 4 (2006), 189-200.

402.

A. Carpinteri, S. Puzzi, "Fracture mechanics and complexity sciences – Part II. Complex behaviour emerging from simple nonlinear rules: Catastrophes and chaos", Strength, Fracture and Complexity, Vol. 4 (2006), 201-211.

403.

A. Carpinteri, P. Cornetti, S. Puzzi, "Scaling laws and multiscale approach in the mechanics of heterogeneous and disordered materials", Applied Mechanics Reviews (ASME), Vol. 59 (2006), 283-305.

404.

A. Carpinteri, N. Pugno, "Thermal loading in multi-layered and/or functionally graded materials: Residual stress field, delamination, fatigue and related size effects", International Journal of Solids and Structures, Vol. 43 (2006), 828-841.

405.

A. Carpinteri, N. Pugno, "Cracks and re-entrant corners in functionally graded materials", Engineering Fracture Mechanics, Vol. 73 (2006), 1279-1291.

406.

C. Guoit, P. P. Delsanto, A. Carpinteri, N. Pugno, I. Mansury, T. S. Deisboeck, "The dynamic evolution of the power exponent in a universal growth model of tumors", Journal of Theoretical Biology, Vol. 240 (2006), 459-463.

407.

N. Pugno, M. Ciavarella, P. Cornetti, A. Carpinteri, "A generalized Paris’ law for fatigue crack growth", Journal of the Mechanics and Physics of Solids, Vol. 54 (2006), 1333-1349.

408.

P. Cornetti, N. Pugno, A. Carpinteri, D. Taylor, "Finite Fracture Mechanics: A coupled stress and energy failure criterion", Engineering Fracture Mechanics, Vol. 73 (2006), 2021-2033.

409.

N. Pugno, F. Marino, A. Carpinteri, "Towards a periodic table for the nanomechanical properties of elements", International Journal of Solids and Structures, Vol. 43 (2006), 5647-5657.

410.

F. Bosia, N. Pugno, A. Carpinteri, "Subharmonic generation in physical systems: An interaction-box approach", Wave Motion, Vol. 43 (2006), 689-699.

411.

A. Carpinteri, S. Invernizzi, G. Lacidogna, "Numerical assessment of three medieval masonry towers subjected to different loading conditions", Masonry International, Vol. 19 (2006), 65-76.

412.

A. Carpinteri, G. Lacidogna, "Damage monitoring of an historical masonry building by the acoustic emission technique", Materials and Structures (RILEM), Vol. 39 (2006), 161-167.

413.

A. Carpinteri, G. Lacidogna, N. Pugno, "Richter’s laws at the laboratory scale interpreted by acoustic emission", Magazine of Concrete Research, Vol. 58 (2006), 619-625.

414.

A. Carpinteri, G. Lacidogna, "Structural monitoring and integrity assessment of medieval towers", Journal of Structural Engineering (ASCE), Vol.132 (2006), 1681-1690.

415.

A. Carpinteri, G. Lacidogna, G. Niccolini, "Critical behaviour in concrete structures and damage localization by acoustic emission", Key Engineering Materials, Vol. 312 (2006), 305-310; Proceedings of the International Workshop on Fracture of Materials: Moving Forwards, Sydney, Australia, 2006, CD-ROM, Paper N. 634.

416.

A. Carpinteri, G. Ferro, G. Ventura, "An augmented lagrangian approach to material discontinuities in meshless methods", Computational Mechanics, Vol. 37 (2006), 207-220.

417.

A. Carpinteri, Y.-W. Mai, R. O. Ritchie, "Editorial", International Journal of Fracture, Vol. 138 (2006), 1-2.

418.

A. Carpinteri, "ICF11 Official Speeches", International Journal of Fracture, Vol. 138 (2006), 3-11.

419.

A. Carpinteri, M. Kitagawa, A. Saxena, B. Wilshire, T. Yokobori, Jr, "Guest-editorial – Special Issue: Parte I of selected papers presented at symposium and special session ICF11", Strength, Fracture and Complexity, Vol. 4, N. 1 (2006), 1.

420.

A. Carpinteri, M. Kitagawa, A. Saxena, B. Wilshire, T. Yokobori, Jr, "Guest-editorial – Special Issue: Parte II of selected papers presented at symposium and special session ICF11", Strength, Fracture and Complexity, Vol. 4, N. 2 (2006), 63.

421.

A. Carpinteri, J.R. Carmona, G. Ventura, "Modelo analítico para estudiar la propagación de fisuras en modo mixto en elementos de hormigón armado. Aplicación del bridged crack model", Anales de Mecánica de la Fractura, Vol. 23 (2006), 103-108.

ANNO 2007

437.

A. Carpinteri, G. Lacidogna, M. Paggi, "Acoustic emission monitoring and numerical modeling of FRP delamination in RC beams with non-rectangular cross-section", Materials and Structures (RILEM), Vol. 40 (2007), 553-566.

438.

A. Carpinteri, M. Paggi, "Numerical analysis of fracture mechanisms and failure modes in bi-layered structural components", Finite Elements in Analysis and Design, Vol. 43 (2007), 941-953.

439.

A. Carpinteri, M. Paggi, "Analytical study of the singularities arising at multi-material interfaces in 2D linear problems", Engineering Fracture Mechanics, Vol. 74 (2007), 59-74.

440.

A. Carpinteri, G. Lacidogna, N. Pugno, "Structural damage diagnosis and life-time assessment by acoustic emission monitoring", Engineering Fracture Mechanics, Vol. 74 (2007), 273-289.

441.

N. Pugno, P. Cornetti, A. Carpinteri, "New unified laws in fatigue: from the Wöhler’s to the Paris’ regime", Engineering Fracture Mechanics, Vol. 74 (2007), 595-601.

442.

A. Carpinteri, M. Paggi, "Self-similarity and crack growth instability in the correlation between the Paris’ constants", Engineering Fracture Mechanics, Vol. 74 (2007), 1041-1053.

443.

A. Carpinteri, B. Chiaia, P. Cornetti, S. Puzzi, "Is the cause of size effect on structural strength fractal or energetic-statistical? – Comments on the paper by Bažant & Yavari", Engineering Fracture Mechanics, Vol. 74 (2007), 2892-2896.

444.

A. Carpinteri, S. Puzzi, "The bridged crack model for the analysis of brittle matrix fibrous composites under repeated bending loading", Journal of Applied Mechanics, Vol. 74 (2007), 1239-1246.

445.

F. Bosia, N. Pugno, G. Lacidogna, A. Carpinteri, "Modelling damage progression by a statistical energy-balance algorithm", Key Engineering Materials, Vol. 347 (2007), 435-440.

446.

A. Carpinteri, G. Lacidogna, G. Niccolini, "Acoustic emission monitoring of medieval towers considered as sensitive earthquake receptors", Natural Hazards and Earth System Sciences, Vol. 7 (2007), 1-11.

447.

A. Carpinteri, G. Lacidogna, "Damage evaluation of three masonry towers by acoustic emission", Engineering Structures, Vol. 29 (2007), 1569-1579.

448.

A. Carpinteri, S. Invernizzi, G. Lacidogna, "Structural assessment of a 17th century masonry vault with AE and numerical techniques", International Journal of Architectural Heritage, Vol. 1 (2007), 214-226.

449.

A. Carpinteri, G. Lacidogna, A. Manuello, "Damage mechanisms interpreted by acoustic emission signal analysis", Key Engineering Materials, Vol. 347 (2007), 577-582.

450.

G. Ferro, A. Carpinteri, G. Ventura, "Minimum reinforcement in concrete structures and material/structural instability", International Journal of Fracture, Vol. 146 (2007), 213-231.

451.

A. Carpinteri, J.R. Carmona, G. Ventura, "Propagation of flexural and shear cracks through reinforced concrete beams by the bridged crack model", Magazine of Concrete Research, Vol. 59 (2007), 743-756.

452.

A. Carpinteri, J.R. Carmona, G. Ventura, "Modelo analítico para estudiar el fallo por compresión en elementos de hormigón armado. Applicaciòn del bridged crack model", Anales de Mecánica de la Fractura, Vol. 24 (2007), 277-282.

453.

A. Carpinteri, M. Paggi, "Are the Paris' law parameters dependent on each other?", Frattura ed Integrità Strutturale, Vol. 2 (2007), 10-16; in Atti del 19° Convegno Nazionale del Gruppo Italiano Frattura (IGF), Milano, Italy, 2007, 217-224.

ANNO 2008

475.

S. Puzzi, A. Carpinteri, "A double-multiplicative dynamic penalty approach for constrained evolutionary optimization", Structural and Multidisciplinary Optimization, Vol. 35 (2008), 431-455.

476.

A. Carpinteri, M. Paggi, "Size-scale effects on strength, friction and fracture energy of faults: A unified interpretation according to fractal geometry", Rock Mechanics and Rock Engineering, Vol. 41 (2008), 735-746.

477.

M. Paggi, A. Carpinteri, "On the stress singularities at multimaterial interfaces and related analogies with fluid dynamics and diffusion", Applied Mechanics Reviews (ASME), Vol. 61 (2008), 20801/1-20801/22.

478.

A. Carpinteri, M. Paggi, G. Zavarise, "The effect of contact on the decohesion of laminated beams with multiple microcracks", International Journal of Solids and Structures, Vol. 45 (2008), 129-143.

479.

A. Carpinteri, M. Paggi, "Thermo-elastic mismatch in nonhomogeneous beams", Journal of Engineering Mathematics, Vol. 61 (2008), 371-384.

480.

M. Ciavarella, M. Paggi, A. Carpinteri, "One, no one, and one hundred thousand crack propagation laws: A generalized Barenblatt and Botvina dimensional analysis approach to fatigue crack growth", Journal of the Mechanics and Physics of Solids, Vol. 56 (2008), 3416-3432.

481.

E. Lepore, S. Brianza, F. Antoniolli, M. Buono, A. Carpinteri, N. Pugno, "Preliminary in vivo experiments on adhesion of geckos", Journal of Nanomaterials (2008), 1-5.

482.

A. Carpinteri, P. Cornetti, N. Pugno, A. Sapora, D. Taylor, "A finite fracture mechanics approach to structures with sharp V-notches", Engineering Fracture Mechanics, Vol. 75 (2008), 1736-1752.

483.

N. Pugno, F. Bosia, A. Carpinteri, "Multiscale stochastic simulations as in-silicon tensile testing of nanotube-based space elevator megacables", Small, Vol. 4 (2008), 1044-1052.

484.

N. Pugno, A. Carpinteri, M. Ippolito, A. Mattoni, L. Colombo, "Atomistic fracture: QFM vs. MD", Engineering Fracture Mechanics, Vol. 75 (2008), 1794-1803.

485.

N. Pugno, A. Carpinteri, "On linear elastic fragmentation mechanics under hydrostatic compression", International Journal of Fracture, Vol. 149 (2008), 113-117.

486.

A. Carpinteri, S. Puzzi, "Self-similarity in concrete fracture: Size-scale effects and transition between different collapse mechanisms", International Journal of Fracture, Vol. 154 (2008), 167-175.

487.

N. Pugno, A. Carpinteri, "Design of micro/nano-scale bio-inspired hierarchical materials", Philosophical Magazine Letters, Vol. 88 (2008), 397-405.

488.

C. Portesi, E. Monticone, S. Borini, G.B. Picotto, N. Pugno, A. Carpinteri, "Fabrication of superconducting MgB2 nanostructures", Journal of Physics: Condensed Matter, Vol. 20 (2008), 474210/1-474210/8.

489.

A. Carpinteri, N. Pugno, "Super-bridges suspended over carbon nanotube cables", Journal of Physics: Condensed Matter, Vol. 20 (2008), 474213/1-474213/8.

490.

N. Pugno, P. Cornetti, A. Carpinteri, "On the impossibility of separating nanotubes in a bundle by a longitudinal tension", Journal of Adhesion, Vol. 84 (2008), 439-444.

491.

N. Pugno, F. Bosia, A.S. Gliozzi, P.P. Delsanto, A. Carpinteri, "Phenomenological approach to mechanical damage growth analysis", Physical Review E, Vol. 78 (2008), 46103/1-46103/5.

492.

A. Carpinteri, N. Pugno, "Mechanics of hierarchical materials", International Journal of Fracture, Vol. 150 (2008), 221-226; in Fracture Mechanics in Design of Fracture Resistant Materials and Structures (Proceedings of an Interquadrennial ICF Conference, Moscow, Russia, 2007), CD-ROM.

493.

A. Kashtanov, N. Pugno, I. Petrov, A. Carpinteri, "Dynamic fracture as a process of nonlinear damage wave propagation", International Journal of Fracture, Vol. 150 (2008), 227-240; in Fracture Mechanics in Design of Fracture Resistant Materials and Structures (Proceedings of an Interquadrennial ICF Conference, Moscow, Russia, 2007), CD-ROM.

494.

A. Carpinteri, N. Pugno, "Bio-inspired hierarchical nanomaterials for space applications", Journal of the British Interplanetary Society, Vol. 61 (2008), 290-294; in Mission to the Outer Solar System and Beyond (Proceedings of the 5th International Academie d’Astronautique Symposium on Realistic Near-Term Advanced Scientific Space Missions, Aosta, Italy, 2007), Ed. G. Genta, 73-78.

495.

F. Bosia, N. Pugno, G. Lacidogna, A. Carpinteri, "Mesoscopic modeling of acoustic emission through an energetic approach", International Journal of Solids and Structures, Vol. 45 (2008), 5856-5866.

496.

A. Carpinteri, G. Lacidogna, G. Niccolini, S. Puzzi, "Critical defect size distributions in concrete structures detected by the acoustic emission technique", Meccanica, Vol. 43 (2008), 349-363.

497.

A. Anzani, L. Binda, A. Carpinteri, G. Lacidogna, A. Manuello, "Evaluation of the repair on multiple leaf stone masonry by acoustic emission", Materials and Structures (RILEM), Vol. 41 (2008), 1169-1189.

498.

A. Carpinteri, G. Lacidogna, S. Puzzi, "Prediction of cracking evolution in full scale structures by the b-value analysis and Yule statistics", Physical Mesomechanics, Vol. 11 (2008), 260-271.

499.

G. Ferro, A. Carpinteri, "Effect of specimen size on the dissipated energy density in compression", Journal of Applied Mechanics, Vol. 75 (2008), 41003/1-41003/8.

ANNO 2009

517.

A. Carpinteri, M. Paggi, "A fractal interpretation of size-scale effects on strength, friction and fracture energy of faults", Chaos, Solitons & Fractals, Vol. 39 (2009), 540-546.

518.

A. Carpinteri, N. Pugno, S. Puzzi, "Strength vs toughness optimization of microstructured composites", Chaos, Solitons & Fractals, Vol. 39 (2009), 1210-1223.

519.

M. Paggi, A. Carpinteri, "Fractal and multifractal approaches for the analysis of crack-size dependent scaling laws in fatigue", Chaos, Solitons & Fractals, Vol. 40 (2009), 1136-1145.

520.

A. Carpinteri, N. Pugno, A. Sapora, "Asymptotic analysis of a von Koch beam", Chaos, Solitons & Fractals, Vol. 41 (2009), 795-802.

521.

A. Carpinteri, G. Lacidogna, S. Puzzi, "From criticality to final collapse: Evolution of the b-value from 1.5 to 1.0", Chaos, Solitons & Fractals, Vol. 41 (2009), 843-853.

522.

N. Pugno, A. Carpinteri, P.P. Delsanto, "Predominant natural red-shift of quasi conservative nonlinear systems", Chaos, Solitons & Fractals, Vol. 41 (2009), 881-885.

523.

P.P. Delsanto, A.S. Gliozzi, C.L.E. Bruno, N. Pugno, A. Carpinteri, "Scaling laws and fractality in the framework of a phenomenological approach", Chaos, Solitons & Fractals, Vol. 41 (2009), 2782-2786.

524.

A. Carpinteri, G. Lacidogna, G. Niccolini, "Fractal analysis of damage detected in concrete structural elements under loading", Chaos, Solitons & Fractals, Vol. 42 (2009), 2047-2056.

525.

A. Carpinteri, M. Paggi, "A top-down approach for the prediction of hardness and toughness of hierarchical materials", Chaos, Solitons & Fractals, Vol. 42 (2009), 2546-2552.

526.

A. Carpinteri, S. Puzzi, "The fractal-statistical approach to the size-scale effects on material strength and toughness", Probabilistic Engineering Mechanics, Vol. 24 (2009), 75-83.

527.

N. Pugno, F. Bosia, A. Carpinteri, "Size effects on the strength of nanotube bundles", Measurement Science and Technology, Vol. 20 (2009), 84028/1-84028/5.

528.

A. Carpinteri, N. Pugno, "Extension of the de Saint Venant and Kirchhoff theories to functionally graded materials", Strength, Fracture and Complexity, Vol. 5 (2009), 53-62.

529.

F. Cardone, A. Carpinteri, G. Lacidogna, "Piezonuclear neutrons from fracturing of inert solids", Physics Letters A, Vol. 373 (2009), 4158-4163.

530.

A. Carpinteri, F. Cardone, G. Lacidogna, "Piezonuclear neutrons from brittle fracture: Early results of mechanical compression tests", Strain, Vol. 45 (2009), 332-339; Atti dell’Accademia delle Scienze di Torino, Torino, Italy, Vol. 33 (2009), 27-42.

531.

A. Carpinteri, S. Invernizzi, G. Lacidogna, "Historical brick-masonry subjected to double flat-jack test: Acoustic emissions and scale effects on cracking density", Construction and Building Materials, Vol. 23 (2009), 2813-2820.

532.

G. Niccolini, G. Durin, A. Carpinteri, G. Lacidogna, A. Manuello, "Crackling noise and universality in fracture systems", Journal of Statistical Mechanics: Theory and Experiments (on-line), 2009, P1023/1-P1023/11.

533.

G. Niccolini, F. Bosia, A. Carpinteri, G. Lacidogna, A. Manuello, N. Pugno, "Self-similarity of waiting times in fracture systems", Physical Review E, Vol. 80 (2009), 26101/1-26101/6.

534.

A. Carpinteri, G. Lacidogna, G. Niccolini, S. Puzzi, "Morphological fractal dimension versus power-law exponent in the scaling of damaged media", International Journal of Damage Mechanics, Vol. 18 (2009), 259-282.

535.

A. Carpinteri, G. Lacidogna, A. Manuello, S. Invernizzi, L. Binda, "Stability of the vertical bearing structures of the Syracuse Cathedral: Experimental and numerical evaluation", Materials and Structures (RILEM), Vol. 42 (2009), 877-888.

536.

A. Carpinteri, P. Cornetti, G. Lacidogna, M. Paggi, "Towards a unified approach for the analysis of failure modes in FRP-retrofitted concrete beams", Advances in Structural Engineering, Vol. 12 (2009), 715-729.

537.

A. Carpinteri, S. Invernizzi, G. Lacidogna, "Closure to: Structural monitoring and integrity assessment of medieval towers, by Alberto Carpinteri and Giuseppe Lacidogna", Journal of Structural Engineering (ASCE), Vol. 135 (2009), 207-208.

538.

A. Carpinteri, M. Corrado, M. Paggi, G. Mancini, "New model for the analysis of size-scale effects on the ductility of reinforced concrete elements in bending", Journal of Engineering Mechanics (ASCE), Vol. 135 (2009), 221-229.

539.

A. Carpinteri, P. Cornetti, A. Sapora, M. Di Paola, M. Zingales, "Fractional calculus in solid mechanics: Local versus non-local approach", Physica Scripta, Vol. T136 (2009),14003/1-14003/7.

540.

A. Carpinteri, P. Cornetti, A. Sapora, "Static-kinematic fractional operators for fractal and non-local solids", Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 89 (2009), 207-217.

541.

A. Carpinteri, P. Cornetti, N. Pugno, A. Sapora, "Strength of hierarchical materials", Microsystem Technologies, Vol. 15 (2009), 27-31.

542.

A. Carpinteri, M. Paggi, "A unified interpretation of the power laws in fatigue and the analytical correlations between cyclic properties of engineering materials", International Journal of Fatigue, Vol. 31 (2009), 1524-1531.

543.

A. Carpinteri, M. Corrado, G. Mancini, M. Paggi, "A numerical approach to modelling size effects on the flexural ductility of RC beams", Materials and Structures (RILEM), Vol. 42 (2009), 1353-1367.

544.

A. Carpinteri, M. Corrado, G. Mancini, M. Paggi, "The overlapping crack model for uniaxial and eccentric concrete compression tests", Magazine of Concrete Research, Vol. 61 (2009), 745-757.

545.

A. Carpinteri, M. Corrado, "An extended (fractal) overlapping crack model to describe crushing size-scale effects in compression", Journal of Engineering Failure Analysis, Vol. 16 (2009), 2530-2540.

546.

A. Carpinteri, M. Corrado, G. Mancini, M. Paggi, "Size-scale effects on plastic rotational capacity of reinforced concrete beams", Structural Journal (ACI), Vol. 106 (2009), 887-896.

547.

A. Carpinteri, P. Cornetti, N. Pugno, "Edge debonding in FRP strengthened beams: Stress versus energy failure criteria", Engineering Structures, Vol. 31 (2009), 2436-2447.

548.

A. Carpinteri, P. Cornetti, N. Pugno, A. Sapora, D. Taylor, "Generalized fracture toughness for specimens with re-entrant corners: Experiments vs. theoretical predictions", Structural Engineering and Mechanics, Vol. 32 (2009), 609-620.

549.

A. Carpinteri, M. Paggi, "Asymptotic analysis in linear elasticity: From the pioneering studies by Wieghardt and Irwin until today", Engineering Fracture Mechanics, Vol. 76 (2009), 1771-1784.

550.

A. Carpinteri, M. Paggi, G. Zavarise, "Cusp-catastrophe interpretation of the stick-slip behaviour of rough surfaces", Computer Modeling in Engineering & Sciences, Vol. 1521 (2009), 1-23.

551.

A. Manuello, A. Carpinteri, G. Lacidogna, "L’emissione acustica applicata al monitoraggio delle strutture portanti della cattedrale di Siracusa", Rivista Italiana di Acustica, Vol. 33 (2009), 23-29.

552.

A. Carpinteri, M. Corrado, G. Mancini, M. Paggi, "Il modello della fessura coesiva in trazione e compressione per la valutazione della duttilità degli elementi strutturali in calcestruzzo armato", Frattura ed Integrità Strutturale, Vol. 7 (2009), 17-28; Atti del 17° Congresso dei Tecnici della Industrializzazione Edilizia (CTE), Roma, Italy, 2008, Vol. 1, 89-98.

553.

A. Carpinteri, S. Puzzi, "Complexity: A new paradigm for fracture mechanics", Frattura ed Integrità Strutturale, Vol.10 (2009), 3-11; Atti del 19° Convegno Nazionale del Gruppo Italiano Frattura (IGF), Milano, Italy, 2007, XI-XVIII.

554.

A. Carpinteri, G. Lacidogna, A. Manuello, "The b-value analysis for the stability investigation of the ancient Athena Temple in Syracuse", Strain, Vol. 47 (2009), 243-253.

567.

A. Carpinteri, P. Cornetti, N. Pugno, A. Sapora, "Fractals to model hierarchical biomaterials", in MiningSmartness from Nature, Eds. P. Vincenzini, S. Graziani, Trans Tech Publications , Zürich (2009), 54-59.

ANNO 2010

577.

P. Cornetti, D. Taylor, A. Carpinteri, "An asymptotic matching approach to shallow-notched structural elements", Engineering Fracture Mechanics, Vol. 77 (2010), 348-358.

578.

P. Bocca, G. Lacidogna, A. Grazzini, A. Manuello, D. Masera, A. Carpinteri, "Creep behaviour in reinforced masonry walls interpreted by acoustic emission", Key Engineering Materials, Vols. 417-418 (2010), 237-240.

579.

A. Carpinteri, F. Cardone, G. Lacidogna, "Energy emissions from failure phenomena: Mechanical, electromagnetic, nuclear", Experimental Mechanics, Vol. 50 (2010), 1235-1243; Conference & Exposition on Experimental and Applied Mechanics (SEM), Albuquerque, New Mexico, 2009, CD-ROM, Paper N. 538.

580.

A. Anzani, L. Binda, A. Carpinteri, S. Invernizzi, G. Lacidogna, "A multilevel approach for the damage assessment of historic masonry towers", Journal of Cultural Heritage, Vol. 11 (2010), 459-470.

581.

A. Carpinteri, G. Lacidogna, S. Puzzi, "A global approach for three-dimensional analysis of tall buildings", The Structural Design of Tall and Special Buildings, Vol. 19 (2010), 518-536.

582.

A. Carpinteri, M. Corrado, "Dimensional analysis approach to the plastic rotation capacity of over-reinforced concrete beams", Engineering Fracture Mechanics, Vol. 77 (2010), 1091-1100.

583.

A. Carpinteri, M. Corrado, "Nonlinear fracture mechanics investigation on the ductility of reinforced concrete beams", Revista IBRACON de Estructuras e Materiais, Vol. 3 (2010), 137-148.

584.

A. Carpinteri, M. Corrado, M. Paggi, "An integrated cohesive/overlapping crack model for the analysis of flexural cracking and crushing in RC beams", International Journal of Fracture, Vol. 161 (2010), 161-173.

585.

A. Carpinteri, M. Paggi, "A unified fractal approach for the interpretation of the anomalous scaling laws in fatigue and comparison with existing models", International Journal of Fracture, Vol.161 (2010), 41-52.

586.

A. Carpinteri, M. Paggi, "Analysis of snap-back instability due to end-plate debonding in strengthened beams", Journal of Structural Engineering (ASCE), Vol. 136 (2010), 199-208.

587.

E. Cadamuro, A. Carpinteri, M. Paggi, "A generalisation of the Hillerborg’s model for the analytical evaluation of ductility of RC beams in bending", Magazine of Concrete Research, Vol. 62 (2010), 557-567.

588.

L. De Lorenzis, M. Paggi, A. Carpinteri, G. Zavarise, "Linear elastic fracture mechanics approach to plate end debonding in rectilinear and curved plated beams", Advances in Structural Engineering, Vol.13 (2010), 875-889.

589.

M. Paggi, A. Carpinteri, R. Orta, "A mathematical analogy and a unified asymptotic formulation for singular elastic and electromagnetic fields at multimaterial wedges", Journal of Elasticity, Vol. 99 (2010), 131-146.

590.

M. Corrado, M. Paggi, A. Carpinteri, "Limits to plastic analysis due to size-scale effects on the rotational capacity of reinforced concrete cross sections", Structural Engineering International, Vol. 20 (2010), 240-245.

591.

A. Carpinteri, A. Sapora, "Diffusion problems in fractal media defined on Cantor sets", Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 90 (2010), 203-210.

592.

A. Carpinteri, P. Cornetti, N. Pugno, A. Sapora, "On the most dangerous V-notch", International Journal of Solids and Structures, Vol. 47 (2010), 887-893.

593.

A. Carpinteri, N. Pugno, A. Sapora, "Free vibration analysis of a von Koch beam", International Journal of Solids and Structures, Vol. 47 (2010), 1555-1562.

594.

A. Carpinteri, A. De Stefano, S. Invernizzi, G. Ruocci, G. Lacidogna, A. Manuello, R. Ceravolo, L. Degiovanni, A. Quattrone, "Experimental and numerical analysis of a two-span model masonry arch bridge subjected to pier scour", Advanced Materials Research, Vols. 133-134 (2010), 301-306.

595.

A. Carpinteri, S. Invernizzi, G. Lacidogna, A. Manuello, "Preservation, safeguard and valorization of masonry decorations in the architectural historical heritage of Piedmont (Italy)", Advanced Materials Research, Vols. 133-134 (2010), 1015-1020.

596.

A. Carpinteri, O. Borla, G. Lacidogna, A. Manuello, "Neutron emissions in brittle rocks during compression tests: Monotonic vs. cyclic loading", Physical Mesomechanics, Vol. 13 (2010), 268-274.

597.

G. Niccolini, A. Schiavi, P. Tarizzo, A. Carpinteri, G. Lacidogna, A. Manuello, "Scaling in temporal occurrence of quasi-rigid-body vibration pulses due to macrofractures", Physical Review E, Vol. 82 (2010), 046115/1-046115/5.

598.

A. Carpinteri, P. Cornetti, N. Pugno, A. Sapora, "Anisotropic linear elastic properties of fractal-like composites", Physical Review E, Vol. 82 (2010), 056114/1-056114/7.

599.

A. Carpinteri, J.R. Carmona, G. Ventura, "Estudio experimental sobre las transiciones entre los modos de fallo en vigas de hormigón armado sin cercos", Anales de Mecánica de Fractura, Vol. 27 (2010), 235-240.

ANNO 2011

625.

O. Plekhov, M. Paggi, O. Naimark, A. Carpinteri, "A dimensional analysis interpretation to grain size and loading frequency dependencies of the Paris and Wöhler curves", International Journal of Fatigue, Vol. 33 (2011), 477-483.

626.

A. Carpinteri, M. Paggi, "Singular harmonic problems at a wedge vertex: mathematical analogies between elasticity, diffusion, electromagnetism, and fluid dynamics", Journal of Mechanics of Materials and Structures, Vol. 6 (2011), 113-125.

627.

A. Carpinteri, M. Paggi, "Dimensional analysis and fractal modeling of fatigue crack growth", Journal of ASTM International, Vol. 8 (2011), ONLINE, pp. 13; Proceedings of the Eleventh International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics, Anaheim, USA, May 18-20 (2011).

628.

A. Carpinteri, P. Cornetti, N. Pugno, A. Sapora, "The problem of the critical angle for edge and center V-notched structures", European Journal of Mechanics A/Solids, Vol. 30 (2011), 281-285.

629.

A. Carpinteri, N. Pugno, A. Sapora, "Dynamic response of damped von Koch antennas", Journal of Vibration and Control, Vol. 17 (2011), 733-740.

630.

A. Carpinteri, P. Cornetti, A. Sapora, "A fractional calculus approach to nonlocal elasticity", European Physical Journal, Vol. 193 (2011), 193-204.

631.

A. Carpinteri, P. Cornetti, A. Sapora, "Brittle failures at rounded V-notches: A finite fracture mechanics approach", International Journal of Fracture, Vol. 172 (2011), 1-8.

632.

P. Cornetti, A. Carpinteri, "Modelling the FRP-concrete delamination by means of an exponential softening law", Engineering Structures, Vol. 33 (2011), 1988-2001.

633.

A. Carpinteri, M. Corrado, "Upper and lower bounds for structural design of RC members with ductile response", Engineering Structures, Vol. 33 (2011), 3432-3441.

634.

M. Corrado, E. Cadamuro, A. Carpinteri, "Dimensional analysis approach to study snap back-to-softening-to-ductile transitions in lightly reinforced quasi-brittle materials", International Journal of Fracture, Vol. 172 (2011), 53-63.

635.

A. Carpinteri, G. Lacidogna, G. Niccolini, "Damage analysis of reinforced concrete buildings by the acoustic emission technique", Structural Control and Health Monitoring, Vol. 18 (2011), 660-673.

636.

A. Carpinteri, G. Lacidogna, A. Manuello, O. Borla, "Energy emissions from brittle fracture: Neutron measurements and geological evidences of piezonuclear reactions", Strength, Fracture and Complexity, Vol. 7 (2011), 13-31.

637.

G. Niccolini, A. Carpinteri, G. Lacidogna, A. Manuello, "Acoustic Emission monitoring of the Syracuse Athena Temple: Scale invariance in the timing of ruptures", Physical Review Letters, Vol. 106 (2011), 108503/1-108503/4.

638.

A. Carpinteri, G. Niccolini, G. Lacidogna, A. Manuello, "Acoustic emission of the Syracuse Athena Temple: Time-scale invariance from microcracking to earthquakes", Journal of Statistical Mechanics: Theory and Experiments, (on-line), (2011), P09009/1-P09009/7.

639.

A. Schiavi, G. Niccolini, P. Tarizzo, A. Carpinteri, G. Lacidogna, A. Manuello, "Acoustic emissions at high and low frequencies during compression tests on brittle materials", Strain, Vol. 47, Suppl. 2 (2011), 105-110.

640.

G. Lacidogna, A. Carpinteri, A. Manuello, G. Durin, A. Schiavi, G. Niccolini, A. Agosto, "Acoustic and electromagnetic emissions as precursor phenomena in failure processes", Strain, Vol. 47, Suppl. 2 (2011), 144-152.

641.

S. Invernizzi, G. Lacidogna, A. Manuello, A. Carpinteri, "AE monitoring and numerical simulation of a two-span model masonry arch bridge subjected to pier scour", Strain, Vol. 47, Suppl. 2 (2011), 158-169.

642.

A. Carpinteri, A. Manuello, "Geomechanical and geochemical evidence of piezonuclear fission reactions in the Earth’s Crust", Strain, Vol. 47, Suppl. 2 (2011), 267-281.

643.

A. Carpinteri, A. Chiodoni, A. Manuello, R. Sandrone, "Compositional and microchemical evidence of piezonuclear fission reactions in rock specimens subjected to compression tests", Strain, Vol. 47, Suppl. 2 (2011), 282-292.

644.

A. Carpinteri, M. Corrado, M. Paggi, "An analytical model based on strain localisation for the study of size-scale and slenderness effects in uniaxial compression tests", Strain, Vol. 47, Suppl. 2 (2011), 351-362.

645.

A. Carpinteri, J. Ruiz Carmona, G. Ventura, "Failure mode transitions in reinforced concrete beams - Part 1: Theoretical model", Structural Journal (ACI), Vol. 108 (2011), 277-285.

646.

A. Carpinteri, J. Ruiz Carmona, G. Ventura, "Failure mode transitions in reinforced concrete beams - Part 2: Experimental tests", Structural Journal (ACI), Vol. 108 (2011), 286-293.

ANNO 2012

661.

A. Carpinteri, M. Paggi, "Modelling strain localization by cohesive/overlapping zones in tension/compression: Brittleness size effects and scaling in material properties", Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 92(10) (2012), 829-840.

662.

B. Gong, M. Paggi, A. Carpinteri, "A cohesive crack model coupled with damage for interface fatigue problems", International Journal of Fracture, Vol. 137 (2012), 91-104.

663.

M. Paggi, A. Carpinteri, P. Wriggers, "Editorial: Special issue on fracture and contact mechanics for interface problems", Engineering Fracture Mechanics, Vol. 80 (2012), 1-2.

664.

M. Paggi, A. Carpinteri, P. Wriggers, "Editorial: Special issue on computational methods for interface mechanical problems", Computational Mechanics, Vol. 50 (2012), 1-4.

666.

A. Carpinteri, M. Corrado, G. Goso, M. Paggi, "Size-scale effects on interaction diagrams for reinforced concrete columns", Construction and Building Materials, Vol. 27 (2012), 271-279.

667.

A. Carpinteri, M. Corrado, G. Lacidogna, S. Cammarano, "Lateral load effects on tall shear wall structures of different height", Structural Engineering and Mechanics, Vol. 41 (2012), 313-337.

668.

A. Carpinteri, B. Gong, M. Corrado, "Hardening cohesive/overlapping zone model for metallic materials: The size-scale independent constitutive law", Engineering Fracture Mechanics, Vol. 82 (2012), 29-45.

669.

A. Carpinteri, M. Corrado, G. Lacidogna, "Three different approaches for damage domain characterization in disordered materials: Fractal energy density, b-value statistics, renormalization group theory", Mechanics of Materials, 53 (2012), 15-28.

671.

A. Carpinteri, A. Manuello, "An indirect evidence of piezonuclear fission reactions: Geomechanical and geochemical evolution in the Earth’s Crust", Physical Mesomechanics, Vol. 15 (2012), 37-46.

670.

A. Carpinteri, G. Lacidogna, A. Manuello, O. Borla, "Piezonuclear fission reactions in rocks: Evidences from microchemical analysis, neutron emission, and geological transformation", Rock Mechanics and Rock Engineering, Vol. 45(4) (2012), 445-459.

671.

A. Carpinteri, J. Xu, G. Lacidogna, A. Manuello, "Reliable onset time determination and source location of acoustic emissions in concrete structures", Cement & Concrete Composites, Vol. 34 (2012), 529-537.

672.

G. Niccolini, J. Xu, A. Manuello, G. Lacidogna, A. Carpinteri, "Onset time determination of acoustic and electromagnetic emission during rock fracture", Progress in Electromagnetics Research Letters, Vol. 35 (2012), 51-62.

673.

A. Carpinteri, G. Lacidogna, A. Manuello, G. Niccolini, A. Schiavi, A. Agosto, "Mechanical and electromagnetic emissions related to stress-induced cracks", Experimental Techniques, Vol. 36 (2012), 53-64.

674.

A. Carpinteri, G. Lacidogna, O. Borla, A. Manuello, G. Niccolini, "Electromagnetic and neutron emissions from brittle rocks failure: Experimental evidence and geological implications", Sadhana, Vol. 37(1) (2012), 59-78.

675.

A. Carpinteri, G. Lacidogna, A. Manuello, O. Borla, "Piezonuclear neutrons from earthquakes as a hypothesis for the image formation and the radiocarbon dating of the Turin Shroud", Scientific Research and Essays, Vol. 7 (2012), 2603-2612.

676.

A. Carpinteri, P. Cornetti, A. Sapora, "A finite fracture mechanics approach to the asymptotic behaviour of U-notched structures", Fatigue & Fracture of Engineering Materials & Structures, Vol. 35 (2012), 451-457.

677.

P. Cornetti, V. Mantic, A. Carpinteri, "Finite fracture mechanics at elastic interfaces", International Journal of Solids and Structures, Vol. 49 (2012), 1022–1032.

678.

A. Carpinteri, J.R. Carmona, G. Ventura, "Failure mode transitions in reinforced concrete beams - Part 1: Theoretical model, and Part 2: Experimental tests – Discussion on a paper by A. Windisch", Structural Journal (ACI), Vol. 109 (2012), 267.

ANNO 2013

693.

B. Chiaia, M. Borri-Brunetto, A. Carpinteri, "Mathematical modelling of the mechanics of core drilling in geomaterials",Machining Science and Technology, Vol. 17 (2013), 1-25.

694.

A. Sapora, P. Cornetti, A. Carpinteri, "Wave propagation in nonlocal elastic continua modelled by a fractional calculus approach", Communications in Nonlinear Science and Numerical Simulation,Vol. 18 (2013), 63-74.

695.

A. Sapora, P. Cornetti, A. Carpinteri, "A finite fracture mechanics approach to V-notched elements subjected to mixed-mode loading", Engineering Fracture Mechanics, Vol. 97 (2013), 216-226.

696.

P. Cornetti, A. Sapora, A. Carpinteri, "Mode mixity and size effect in V-notched structures", International Journal of Solids and Structures, Vol. 50 (2013), 1562-1582.

697.

A. Sapora, P. Cornetti, A. Carpinteri, "Diffusion problems on fractional nonlocal media", Central European Journal of Physics, Vol. 10-11 (2013), 1255-1261.

698.

I. Iturrioz, G. Lacidogna, A. Carpinteri, "Experimental analysis and truss-like discrete element model simulation of concrete specimens under uniaxial compression",Engineering Fracture Mechanics, Vol. 110 (2013), 81-98.

699.

A. Carpinteri, M. Corrado, G. Lacidogna, "Heterogeneous materials in compression: Correlations between absorbed, released and acoustic emission energies", Engineering Failure Analysis, Vol. 33 (2013), 236-250.

700.

A. Carpinteri, M. Paggi, "A theoretical approach to the interaction between buckling and resonance instabilities", Journal of Engineering Mathematics, Vol. 78 (2013), 19-35.

701.

M. Paggi, E. Lehmann, C. Weber, A. Carpinteri, P. Wriggers, M. Schaper, "A numerical investigation of the interplay between cohesive cracking and plasticity in polycrystalline materials", Computational Materials Science, Vol. 77 (2013), 81-92.

702.

A. Carpinteri, G. Lacidogna, A. Manuello, O. Borla, "Piezonuclear fission reactions from earthquakes and brittle rocks failure: Evidence of neutron emission and nonradioactive product elements", Experimental Mechanics, Vol. 53 (2013), 345-365.

703.

S. Invernizzi, G. Lacidogna, A. Carpinteri, "Particle-based numerical modeling of AE statistics in disordered materials", Meccanica, Vol. 48 (2013), 211-220.

704.

S. Invernizzi, G. Lacidogna, A. Carpinteri, "Scaling of fracture and acoustic emission in concrete", Magazine of Concrete Research, Vol. 65 (2013), 529-534.

706.

A. Carpinteri, M. El-Khatieb, E. Cadamuro, "Failure mode transitions in RC beams: A cohesive/overlapping crack model application", Meccanica, Vol. 48 (2013), 2349-2366.

707.

A. Carpinteri, G. Lacidogna, F. Accornero, A. Mpalaskas, T. Matikas, D. Aggelis, "Influence of damage on the acoustic emission parameters", Cement and Concrete Composites, Vol. 44 (2013), 9-16.

708.

A. Carpinteri, G. Lacidogna, S. Cammarano, "Structural analysis of high-rise buildings under horizontal loads: A study on the Intesa Sanpaolo tower in Turin", Engineering Structures, Vol. 56 (2013), 1362-1371.

ANNO 2014

739.

A. Carpinteri, D.M.R. Taplin, S. Yu, A.T. Yokobori, "Preface", Strength, Fracture and Complexity, Vol. 8 (2013/2014), 59.

740.

A. Carpinteri, D.M.R. Taplin, "The Cottrel Legacy: Metamorphosis of ICF into the World Academy of Structural Integrity 2011-2021", Strength, Fracture and Complexity, Vol. 8 (2013/2014), 61-69.

741.

P. Cornetti, A. Sapora, A. Carpinteri, "T-stress effects on crack kinking in finite fracture mechanics", Engineering Fracture Mechanics, Vol. 132 (2014), 169-176.

742.

A. Sapora, P. Cornetti, A. Carpinteri, "V-notched elements under mode II loading conditions", Structural Engineering and Mechanics, Vol. 49 (2014), 499-508.

744.

A. Sapora, P. Cornetti, A. Carpinteri, "Analytical stress intensity factors for cracks at blunted v-notches", Procedia Materials Science, Vol. 3 (2014), 738-743.

743.

A. Sapora, P. Cornetti, A. Carpinteri, "Cracks at rounded V-notch tips: An analytical expression for the stress intensity factor", International Journal of Fracture, Vol. 187 (2014), 285-291.

744.

A. Carpinteri, G. Lacidogna, S. Cammarano, "Conceptual design of tall and unconventionally shaped structures: An handy analytical method", Advances in Structural Engineering, Vol. 17 (2014), 767-783.

745.

I. Iturrioz, G. Lacidogna, A. Carpinteri, "Acoustic emission detection in concrete specimens: Experimental analysis and lattice model simulations", International Journal of Damage Mechanics, Vol. 23 (2014), 327-358.

746.

A. Carpinteri, G. Lacidogna, B. Montrucchio, S. Cammarano, "The effect of the warping deformation on the structural behaviour of thin-walled open section shear walls", Thin-Walled Structures, Vol. 84 (2014), 335-343.

747.

A. Carpinteri, A. Grazzini, G. Lacidogna, A. Manuello, "Durability evaluation of reinforced masonry by fatigue tests and acoustic emission technique", Structural Control and Health Monitoring, Vol. 21 (2014), 950-961.

748.

A. Carpinteri, M. Paggi, "Lagrange and his Mécanique Analytique: From Kantian noumenon to present applications", Meccanica, Vol. 49 (2014), 1-11.

749.

A. Carpinteri, M. Paggi, "The effect of crack size and specimen size on the relation between the Paris and Wöhler curves", Meccanica, Vol. 49 (2014), 765-773.

750.

A. Carpinteri, P. Cornetti, A. Sapora, "Nonlocal elasticity: An approach based on fractional calculus", Meccanica, Vol. 49 (2014), 2551-2569.

751.

M. Corrado, M. Paggi, A. Carpinteri, "A multi-scale numerical method for the study of size-scale effects in ductile fracture", Metals, Vol. 4 (2014), 428-444.

752.

A. Carpinteri, A. Manuello, "Reply to comments on ‘geomechanical and geochemical evidence of piezonuclear fission reactions in the Earth's Crust’ by A. Carpinteri and A. Manuello" by U. Bardi and G. Comoretto, Strain, Vol. 49 (2014), 548-551.

753.

A. Carpinteri, R. Malvano, A. Manuello, G. Piana, "Fundamental frequency evolution in slender beams subjected to imoosed axial displacements", Journal of Sound and Vibration, Vol. 333 (2014), 2390-2403.

754.

A. Carpinteri, E. Cadamuro, M. Corrado, "Minimum flexural reinforcement in rectangular and T-section concrete beams", Structural Concrete (FIB), Vol. 15 (2014), 361-372.

ANNO 2015

768.

P. Cornetti, M. Corrado, L. De lorenzis, A. Carpinteri, "An analytical cohesive crack modeling approach to the edge debonding failure of FRP-plated beams", International Journal of Solids and Structures, Vol. 53 (2015), 92-106.

769.

A. Sapora, P. Cornetti, A. Carpinteri, D. Firrao, "Blunt V-notch brittle francure: An improved finite fracture mechanics approach", Advanced Materials Research, Vol. 1105 (2015), 237-244.

770.

A. Sapora, P. Cornetti, A. Carpinteri, D. Firrao, "An improved finite fracture mechanics approach to blunt V-notch brittle fracture mechanics: Experimental verification on ceramic, metallic, and plastic materials", Theoretical and Applied Fracture Mechanics, Vol. 78 (2015), 20-24.

771.

Q. Han, L. Wang, J. Xu, G. Lacidogna, A. Carpinteri, "A robust method to estimate the b-value of the magnitude-frequency distribution of earthquakes", Chaos, Solitons and Fractals, Vol. 81 (2015), 103-110.

772.

Q. Han, J. Xu, A. Carpinteri, G. Lacidogna, "Localization of acoustic emission sources in structural health monitoring of a masonry bridge", Structural Control and Health Monitoring, Vol. 22 (2015), 314-329.

773.

Q. Han, A. Carpinteri, G. Lacidogna, J. Xu, "Fractal analysis and Yule statistics for seismic prediction based on 2009 L’Aquila earthquake in Italy", Arab Journal of Geosciences, Vol. 8 (2015), 2457-2465.

774.

G. Lacidogna, A. Manuello, G. Niccolini, A. Carpinteri, "Acoustic emission monitoring of Italian historical buildings and the case study of the Athena temple in Syracuse", Architectural Science Review, Vol. 58 (2015), 290-299.

775.

A. Carpinteri, G. Lacidogna, F. Accornero, "Evolution of fracturing process in masonry arches", Journal of Structural Engineering (ASCE), Vol. 141 (2015), 4014132/1-4014132/10.

776.

A. Carpinteri, A. Manuello, D. Veneziano, N. D. Cook, "Piezonuclear fission reactions simulated by the lattice model", Journal of Condensed Matter Nuclear Science, Vol. 15 (2015), 149-161.

777.

A. Carpinteri, O. Borla, A. Manuello, D. Veneziano, A. Goi, "Hydrogen embrittlement and piezonuclear reactions in electrolysis experiments", Journal of Condensed Matter Nuclear Science, Vol. 15 (2015), 162-182.

778.

U. Lucia, A. Carpinteri, "GeV plasmons and spalling neutrons from crushing of iron-rich natural rocks", Chemical Physics Letters, Vol. 640 (2015), 112-114.

779.

A. Carpinteri, G. Lacidogna, F. Accornero, S. Invernizzi, "Numerical simulation of the fracturing processes in masonry arches", Proceedings in Applied Mathematics and Mechanics, Vol. 15 (2015), 131-132.

780.

A. Sapora, P. Cornetti, A. Carpinteri, D. Firrao, "Brittle materials and stress concentrations: Are they able to withstand?", Procedia Enginering, Vol. 109 (2015), 296-302.

781.

G. Niccolini, O. Borla, F. Accornero, G. Lacidogna, A. Carpinteri, "Scaling in damage by electrical resistance measurements: An application to the terracotta statues of the Sacred Mountain of Varallo Renaissance Complex (Italy)", Rendiconti Lincei, Scienze Fisiche e Naturali, Vol. 26 (2015), 203-209.

782.

G. Lacidogna, P. Cutugno, G. Niccolini, S. Invernizzi, A. Carpinteri, "Correlation between earthquakes and AE monitoring of historical buildings in seismic areas", Applied Sciences, Vol. 5 (2015), 1683-1698.

ANNO 2016

811.

R. Jones, F. Chen, S. Pitti, M. Paggi, A. Carpinteri, "From NASGRO to fractals: Representing crack growth in metals", International Journal of Fatigue, Vol. 82 (2016), 540-549.

812.

A. Carpinteri, F. Bazzucchi, A. Manuello "Nonlinear instability analysis of longspan roofing structures: The case-study of Porta Susa railway-station", Engineering Structures, Vol. 110 (2016), 48-58.

813.

A. Carpinteri, G. Lacidogna, G. Nitti, "Open and closed shear-walls in high-rise structural systems: Static and dynamic analysis", Curved and Layered Structures, Vol. 3 (2016), 154-171.

814.

A. Carpinteri, G. Lacidogna, M. Corrado, E. Di Battista, "Cracking and crackling in concrete-like materials: A dynamic energy balance", Engineering Fracture Mechanics, Vol. 155 (2016), 130-144.

815.

D. Firrao, P. Matteis, A. Sapora, P. Cornetti, A. Carpinteri, "A coupled FFM model to interpret fracture toughness values for brittle materials", Procedia Structural Integrity, Vol. 2 (2016), 1893-1990.

816.

A. Sapora, P. Cornetti, A. Carpinteri, V. Mantic, "Crack deflection in brittle materials by Finite Fracture Mechanics", Procedia Structural Integrity, Vol. 2 (2016), 1975-1982.

817.

A. Sapora, P. Cornetti, A. Carpinteri, O. Baglieri, E. Santagata, "The use of fractional calculus to model the experimental creep-recovery behavior of modified bituminous binders", Materials and Structures (RILEM), Vol. 49 (2016), 45-55.

818.

A. Carpinteri, G. Lacidogna, A. Manuello, G. Niccolini, "A study on the structural stability of the Asinelli Tower in Bologna", Structural Control and Health Monitoring, Vol. 23 (2016), 659-667.

819.

G. Birck, I. Iturrioz, G. Lacidogna, A. Carpinteri, "Damage process in heterogeneous materials analyzed by a lattice model simulation", Engineering Failure Analysis, Vol. 70 (2016), 157-176.

820.

F. Accornero, G. Lacidogna, A. Carpinteri, "Evolutionary fracture analysis of masonry arches: Effects of shallowness ratio and size scale",Comptes Rendus Mécanique, Vol. 344 (2016), 623-630.

821.

F. Cardone, A. Manuello, R. Mignani, A. Petrucci, E. Santoro, M. Sepielli, A. Carpinteri, "Ultrasonic piezonuclear reactions in steel and sintered ferrite bars", Journal of Advanced Physics, Vol. 5 (2016), 69-75.

822.

G. Piana, E. Lofrano, A. Carpinteri, A. Paolone, G. Ruta, "Experimental modal analysis of straight and curved slender beams by piezoelectric transducers", Meccanica, Vol. 51 (2016), 2797-2811.

823.

P. Cornetti, A. Sapora, A. Carpinteri, "Short cracks and V-notches: Finite fracture mechanics Vs. cohesive crack model", Engineering Fracture Mechanics, Vol. 168 (2016), 2-12.

824.

G. Piana, E. Lofrano, A. Carpinteri, A. Paolone, G. Ruta, "Experimental modal analysis of straight and curved slender beams by piezoelectric transducers", Meccanica, Vol. 51 (2016), 2797-2811.

825.

P. Cornetti, A. Sapora, A. Carpinteri, "Short cracks and V-notches: Finite fracture mechanics Vs. cohesive crack model", Engineering Fracture Mechanics, Vol. 168 (2016), 2-12.

ANNO 2017

830.

A. Carpinteri, "Static-kinematic duality in beams, plates, shells and its central role in the finite element method", Curved and Layered Structures, Vol. 4 (2017), 38-51.

831.

J.X. Tao, N.V. Viet, A. Carpinteri, Q. Wang, "Energy harvesting from wind by a piezoelectric harvester", Engineering Structures, Vol. 133 (2017), 74-80.

832.

X.D. Xie, A. Carpinteri, Q. Wang, "A theoretical model for a piezoelectric energy harvester with a tapered shape", Engineering Structures, Vol. 144 (2017), 19-25.

833.

F. Bazzucchi, A. Manuello, A. Carpinteri, "Interaction between snap-through and Eulerian instability in shallow structures", International Journal of Non-linear Mechanics, Vol. 88 (2017), 11-20.

834.

F. Bazzucchi, A. Manuello, A. Carpinteri, "Instability load evaluation of shallow imperfection-sensitive structures by form and interaction parameters", European Journal of Mechanics A/Solids, Vol. 66 (2017), 201-211.

835.

G. Piana, E. Lofrano, A. Manuello, G. Ruta, A. Carpinteri, "Compressive buckling for symmetric TWB with non-zero warping stiffness", Engineering Structures, Vol. 135 (2017), 246-258.

836.

G. Piana, A. Carpinteri, E. Lofrano, G. Ruta, "Vibration and buckling of open TWBs with local weakening", Procedia Engineering, Vol. 199 (2017), 242-247.

837.

A. Carpinteri, G. Lacidogna, G. Piana, A. Bassani, "TeraHertz mechanical vibrations in lysozyme: Raman spectroscopy vs modal analysis", Journal of Molecular Structure, Vol. 1139 (2017), 222-230.

838.

G. Lacidogna, G. Piana, A. Bassani, A. Carpinteri, "Raman spectroscopy of Na/K-ATPase with special focus on low-frequency vibrations", Vibrational Spectroscopy, Vol. 92 (2017), 298-301.

839.

A. Carpinteri, O. Borla, "Fracto-emissions as seismic precursors", Engineering Fracture Mechanics, Vol. 177 (2017), 239-250.

840.

G. Niccolini, A. Manuello, E. Marchis, A. Carpinteri, "Signal frequency distribution and natural-time analyses from acoustic emission monitoring of an arched structure in the Castle of Racconigi", Natural Hazards and Earth System Sciences, Vol. 17 (2017), 1025-1032.

841.

G. Lacidogna, G. Piana, A. Carpinteri, "Acoustic emission and modal frequency variation in concrete specimens under four-point bending",Applied Sciences, Vol. 7 (2017), Paper N. 339.

842.

O. Baglieri, E. Santagata, A. Sapora, P. Cornetti, A. Carpinteri, "Fractional viscoelastic modeling of antirutting response of bituminous binders",Journal of Engineering Mechanics (ASCE), Vol. 143 (2017), 1-8.

843.

J. Xu, F. Zhengwu, H. Qinghua, G. Lacidogna, A. Carpinteri, "Micro-cracking monitoring and fracture evaluation for crumb rubber concrete based on acoustic emission techniques",Structural Health Monitoring, (2017), doi.10.1177/1475921717730538.

ANNO 2018

855.

J. Xu, F. Zhengwu, H. Qinghua, G. Lacidogna, A. Carpinteri, "Micro-cracking monitoring and fracture evaluation for crumb rubber concrete based on acoustic emission techniques", Structural Health Monitoring, (2017), doi.10.1177/1475921717730538.

856.

N.V. Viet, Q. Wang, A. Carpinteri, "Development of an ocean wave energy harvester with a built-in frequency conversion function", International Journal of Energy Research, Vol. 42 (2018), 684-695.

857.

G. Lacidogna, G. Niccolini, A. Carpinteri, "Time series analysis of acoustic emissions in the asinelli tower during local seismic activity", Applied Sciences, Vol. 8 (2018), Paper N. 1012.

858.

G. Lacidogna, F. Accornero, A. Carpinteri, "Fluctuations of 1/f noise in damaging structures analyzed by acoustic emission", Applied Sciences, Vol. 8 (2018), Paper N. 1685.

859.

F. Accornero, A. Carpinteri, "Multiple snap-back instabilities in progressive microcracking coalescence", Engineering Fracture Mechanics, Vol. 187 (2018), 272-281.

860.

F. Accornero, G. Lacidogna, A. Carpinteri, "Medieval arch bridges in the lanzo valleys, Italy: case studies on incremental structural analysis and fracturing benefit", Journal of Bridge Engineering, Vol. 23(7) (2018):05018005.

861.

M. Corrado, B. Gong, P. Perdonò, A. Carpinteri, "Experimental evidence and numerical simulation of size effects on the ductile fracture of metallic materials", International Journal of Fracture, Vol. 211 (2018), 43-59.

862.

O. Borla, A. Carpinteri, "Nano-scale fracture phenomena and TeraHertz pressure waves as the fundamental reasons for geochemical evolution", Strength, Fracture and Complexity, Vol. 11 (2018), 149-168.

ANNO 2019

864.

F. Accornero, A. Carpinteri, "Rotation versus curvature fractal scaling in bending failure", Physical Mesomechanics, Vol. 22(1), (2019), 46-51.

865.

G. Piana, A. Bassani, G. Lacidogna, A. Carpinteri, "Terahertz vibration modes in Na/K-ATPase", Journal of Biomolecular Structure and Dynamics, (2019), doi: 10.1080/07391102.2018.1425638.

866.

Q. Han, J. Li, J. Xu, F. Ye, G. Lacidogna, A. Carpinteri, "A new frequency domain method for random fatigue life estimation in a wide-band stationary Gaussian random process", Fatigue & Fracture of Engineering Materials & Structures, Vol. 42 (2019), 97-113.

867.

G. Lacidogna, F. Accornero, A. Carpinteri, "Influence of snap-back instabilities on acoustic emission damage monitoring", Engineering Fracture Mechanics, Vol. 210 (2019), 3-12.

868.

O. Borla, A. Carpinteri, "Acoustic, electromagnetic, and neutron emissions as seismic precursors: The lunar periodicity of low-magnitude seismic swarms", Engineering Fracture Mechanics, Vol. 210 (2019), 29-41.

869.

Q. Han, G. Yang, J. Xu, Z. Fu, G. Lacidogna, A. Carpinteri, "Acoustic emission data analyses based on crumb rubber concrete beam bending tests", Engineering Fracture Mechanics, Vol. 210 (2019), 189-202.

870.

G. Piana, G. Lacidogna, A. Carpinteri, "Damage monitoring of three-point bending concrete specimens by acoustic emission and resonant frequency analysis", Engineering Fracture Mechanics, Vol. 210 (2019), 203-211.

871.

A. Manuello, G. Niccolini, A. Carpinteri, "AE monitoring of a concrete arch road tunnel: Damage evolution and localization", Engineering Fracture Mechanics, Vol. 210 (2019), 279-287.

872.

G. Niccolini, G. Lacidogna, A. Carpinteri, "Fracture precursors in a working girder crane: AE natural-time and b-value time series analyses", Engineering Fracture Mechanics, Vol. 210 (2019), 393-399.

873.

S. Invernizzi, G. Lacidogna, N.E. Lozano-Ramìrez, A. Carpinteri, "Structural monitoring and assessment of an ancient masonry tower", Engineering Fracture Mechanics, Vol. 210 (2019), 429-443.

874.

G. Niccolini, A. Carpinteri, "Correlation between the fluctuations in Worldwide seismicity and atmospheric carbon pollution", Sci, Vol. 1 (2019), doi: 10.3390/sci1010002.

875.

G. Lacidogna, D. Scaramozzino, A. Carpinteri, "A matrix-based method for the structural analysis of diagrid systems", Engineering Structures, Vol. 193 (2019), 340-352.

876.

G. Nitti, G. Lacidogna, A. Carpinteri, "Structural analysis of high-rise buildings under horizontal loads: A study on the Piedmont region headquarters tower in Turin", The Open Construction & Building Technology Journal, Vol. 13 (2019), 81-96.

877.

D. Scaramozzino, G. Lacidogna, G. Piana, A. Carpinteri, "A finite-element-based coarse-grained model for global protein vibration", Meccanica, Vol. 54 (2019), 1927-1940.

878.

F. Accornero, A. Carpinteri, "The bridged crack model with multiple fibers: Local instabilities, scale effects, plastic shake-down, and hysteresis", Theoretical and Applied Fracture Mechanics, Vol. 104(2019), Paper N. 102351.

879.

F. Accornero, A. Carpinteri, "Static–kinematic duality in the shells of revolution: Historical aspects and present developments",Archive of Applied Mechanics, Vol. 89(2019), 2313-2320.

880.

Y. Li, B. Gong, G. Lacidogna, D. Wang, A. Carpinteri, "An improved crack driving force estimation approach for stress-based engineering critical assessment of reeled pipes", Theoretical and Applied Fracture Mechanics, Vol. 103 (2019), Paper N. 102312.

881.

N.V. Vlet, Q. Wang, A. Carpinteri, "A novel heaving oceanWave energy harvester with a frequency tuning capability", Arabian Journal for Science and Engineering, Vol. 44 (2019), 5711-5722.

882.

P. Cornetti, M. Muñoz-Reja, A. Sapora, A. Carpinteri, "Finite fracture mechanics and cohesive crack model: Weight functions vs. cohesive laws", Journal of Solids and Structures, Vol. 156-157 (2019), 126-136.

886.

G. Lacidogna, G. Niccolini, A. Carpinteri, "Health monitoring of medieval masonry towers by an acoustic emission approach", Key Engineering Materiels, Vol. 817 (2019), 586-593.

ANNO 2020

897.

G. Lacidogna, G. Nitti, D. Scaramozzino, A. Carpinteri, "Diagrid systems coupled with closed- and open-section shear walls: Optimization of geometrical characteristics in tall buildings", Procedia Manufactoring, Vol. 44 (2020), 402-409.

898.

T. Kishi, A. Carpinteri, S.W. Yu, "Preface", Strength, Fracture and Complexity, Vol. 12 (2020), 61-62.

899.

A. Carpinteri, F. Accornero, "Residual crack opening in fiber-reinforced structural elements subjected to cyclic loading", Strength, Fracture and Complexity, Vol. 12 (2020), 63-74.

900.

A. Carpinteri, F. Montagnoli, "Scaling and fractality in subcritical fatigue crack growth: Crack-size effects on Paris' law and fatigue threshold", Fatigue and Fracture of Engineering Materials and Structures, Vol. 43 (2020), 788-801.

901.

A. Carpinteri, F. Montagnoli, S. Invernizzi, "Scaling and fractality in fatigue resistance: Specimen-size effects on Wöhler's curve and fatigue limit", Fatigue and Fracture of Engineering Materials and Structures, Vol. 43 (2020), 1869-1879.

902.

G. Lacidogna, G. Piana, F. Accornero, A. Carpinteri, "Multi-technique damage monitoring of concrete beams: acoustic emission, digital image correlation, dynamic identification", Construction and Building Materials, Vol. 242 (2020), Article number 118114.

903.

G. Lacidogna, G. Piana, F. Accornero, A. Carpinteri, "Size effect in heterogeneous materials analyzed through a lattice discrete element method approach", Engineering Fracture Mechanics, Vol. 232 (2020), Article number 107041.

904.

D. Scaramozzino, G. Lacidogna, A. Carpinteri, "New trends towards enhanced structural efficiency and aesthetic potential in tall buildings: The case of diagrids", Applied Sciences, Vol. 10 (2020), Paper N. 3917.

905.

A. Manuello, D. Masera, A. Carpinteri, "Acoustic emission monitoring of the Turin cathedral bell tower: Foreshock and aftershock discrimination", Applied Sciences, Vol. 10 (2020), Paper N. 3931.

906.

D. Scaramozzino, P.M. Khade, R.L. Jernigan, G. Lacidogna, A. Carpinteri, "Structural compliance: A new metric for protein flexibility", Proteins: Structure, Function and Bioinformatics, Vol. 88 (2020), 1482-1492.

907.

Z. Zhu, Z. Xiang, J. Li, A. Carpinteri, "Fatigue damage investigation on diaphragm cutout detail on orthotropic bridge deck based on field measurement and FEM", Thin-Walled Structures, Vol. 157 (2020), Article number 107106.

908.

G. Niccolini, A. Rubino, A. Carpinteri, "Dimensional transitions in creeping materials due to nonlinearity and microstructural disorder", Chaos, Solitons and Fractals, Vol. 141 (2020), Article number 110345.

909.

G. Lacidogna, D. Scaramozzino, A. Carpinteri, "Optimization of diagrid geometry based on the desirability function approach", Curbed and Layered Structures, Vol. 7 (2020), 139-152.

910.

G. Lacidogna, D. Scaramozzino, A. Carpinteri, "Influence of the geometrical shape on the structural behavior of diagrid tall buildings under lateral and torque actions", Developments in the Built Environment, Vol. 2 (2020), Article number 100009.

911.

F. Accornero, A. Rubino, A. Carpinteri, "Ductile-to-brittle transition in fibrereinforced concrete beams: Scale and fibre volume fraction effects", Material Design & Processing Communications, Vol. 2 (2020), Article e127.

912.

A. Carpinteri, G. Niccolini, A. Rubino, "Fractal scaling and specimen-size effects on creep resistance", Strength, Fracture and Complexity, Vol. 13 (2020), 105-114.

913.

A. Carpinteri, G. Niccolini, A. Rubino, "Fractal scaling and crack-size effects on creep crack growth", Strength, Fracture and Complexity, Vol. 13 (2020), 131-142.

914.

A. Carpinteri, D. Scaramozzino, G. Lacidogna, G. Piana, "Numerical Evaluation of Protein Global Vibrations at Terahertz Frequencies by Means of Elastic Lattice Models".

915.

A. Carpinteri, G. Lacidogna, D. Scaramozzino, "Geometrically nonlinear behavior of lattice domes coupled with local Eulerian instability", Curved and Layered Structures, Vol. 7 (2020), 247-260.

916.

A. Carpinteri, O. Borla, "Strong correlation between LENR and nano-mechanics instabilities/THz phonons in condensed matter: Applications in geophysics, geochemistry, energetics, biology", Infinite Energy, Issue 153 (2020), 32-37.

ANNO 2021

920.

G. Giordani, D. Scaramozzino, I. Iturrioz, G. Lacidogna, A. Carpinteri, "Modal analysis of the lysozyme protein considering all-atom and coarse-grained finite element models", Applied Sciences, Vol. 11 (2021), Article number 547.

921.

F. Accornero, R. Cafarelli, A. Carpinteri, "Cracking and crushing in prestressed concrete beams", ACI Structural Journal, Vol. 118 (2021), Article number 20-065.

922.

F. Accornero, R. Cafarelli, A. Carpinteri, "The Cohesive/Overlapping crack model for plain and reinforced concrete beams: Scale effects on cracking and crushing failures", Magazine of Concrete Research, (2021), DOI:10.1680/jmacr.20.00260 .

923.

A. Carpinteri, F. Accornero, "Dimensional analysis of critical phenomena: Selfweight failure, turbulence, resonance, fracture", Physical Mesomechanics, (2021), DOI:10.24411/1683-805X-2020-16008 .

924.

F. Accornero, A. Carpinteri, "Funicularity in elastic domes: Coupled effects of shape and thickness", Curved and Layered Structures, Vol. 8 (2021), 181-187.

925.

A. Carpinteri, F. Accornero, R. Cafarelli, "Scale-dependent maximum reinforcement percentage in RC beams", FIB Structural Concrete, (2021), DOI:10.1002/(ISSN)1751-7648 .

926.

S. Invernizzi, F. Montagnoli, A. Carpinteri, "Experimental evidence of specimensize effects on EN-AW6082 aluminum alloy in VHCF regime", Applied Sciences, Vol. 11 (2021), Article number 4272.

927.

G. Piana, E. Lofrano, A. Carpinteri, G. Ruta, "Effect of local stiffeners and warping constraints on the buckling of symmetric open thin-walled beams with high warping stiffness", Meccanica, Vol. 56 (2021), 2083-2102.

928.

G. Piana, A. Carpinteri, "Long-span suspension bridge flutter analysis with drag force effects", Journal of Applied and Computational Mechanics, Vol. 7 (2021), 1077-1089.

929.

G. Nitti, G. Lacidogna, A. Carpinteri, “An analytical formulation to evaluate natural frequencies and mode shapes of high-rise buildings”, Curved and Layered Structures, Vol. 8 (2021), 307-318.

930.

Z. Zhu, J. Li, Y. Huang, A. Carpinteri, “Hot-spot stress models of cutout detail on orthotropic steel bridge decks”, Journal of Constructional Steel Research, Vol. 183 (2021), Paper N. 106762.

931.

D. Scaramozzino, G. Piana, G. Lacidogna, A. Carpinteri, “Low-frequency harmonic perturbations drive protein conformational changes”, International Journal of Molecular Sciences, Vol. 22 (2021), Paper N. 10501.

932.

P.M. Khade, D. Scaramozzino, A. Kumar, G. Lacidogna, A. Carpinteri, R.L. Jernigan, “hdANM: a new comprehensive dynamics model for protein hinges”, Biophysical Journal, Vol. 120 (2021), 4955-4965.

933.

Z. Zhu, J. Li, X. Chen, A. Carpinteri, “Stress behaviors of rib-to-deck double sided weld detail on orthotropic steel deck”, Journal of Constructional Steel Research, Vol. 187 (2021), Paper N. 106947.

934.

F. Accornero, A. Carpinteri, “Ponti ad arco in muratura: Analisi evolutiva del processo di fessurazione”, Archi, Vol. 5 (2021), 9-11.

935.

G. Lacidogna, G. Nitti, D. Scaramozzino, A. Carpinteri, “Diagrid system coupled with shear walls: Analytical investigation on the dynamical response in tall buildings”, Eccomas Proceedia COMPDYN, (2021),1793-1802.

ANNO 2022

938.

S. Invernizzi, F. Montagnoli, A. Carpinteri, “Very high cycle corrosion fatigue study of the collapsed Polcevera bridge, Italy”, Journal of Bridge Engineering (ASCE), Vol. 27 (2022), Paper N. 04021102.

939.

F. Montagnoli, S. Invernizzi, A. Carpinteri, “Multi-Fractal Scaling Law applied to VHCF with an emphasis on statistical fluctuations”, Procedia Structural Integrity, Vol. 42 (2022), 321-327.

940.

D. Scaramozzino, B. Albitos, G. Lacidogna, A. Carpinteri, “Selection of the optimal diagrid patterns in tall buildings within a multi-response framework: Application of the desirability function”, Journal of Building Engineering, Vol. 54 (2022), Paper N. 104645.

941.

A. Carpinteri, F. Accornero, R. Cafarelli, “Scale effects in prestressed concrete structures: Maximum reinforcement percentage to avoid brittle crushing”, Engineering Structures, Vol. 255 (2022), Paper N. 113911.

942.

F. Accornero, A. Rubino, A. Carpinteri, “Post-cracking regimes in the flexural behaviour of fibre-reinforced concrete beams”, International Journal of Solids and Structures, Vol. 248 (2022), Paper N. 111637.

943.

A. Carpinteri, F. Accornero, A. Rubino, “Scale effects in the post-cracking behavior of fibre-reinforced concrete beams”, International Journal of Fracture, (2022), 1-16.

944.

F. Accornero, A. Rubino, A. Carpinteri, “Ultra-low cycle fatigue (ULCF) in fibre-reinforced concrete beams”, Theoretical and Applied Fracture Mechanics, Vol. 120 (2022), Paper N. 103392.

945.

F. Accornero, A. Rubino, A. Carpinteri, “A fracture mechanics approach to the design of hybrid-reinforced concrete beams”, Engineering Fracture Mechanics, Vol. 275 (2022), Paper N. 108821.

946.

Z. Song, Y. Li, A. Carpinteri, S. Wang, B. Yang, “Interphase elastic properties of carbon nanotube-epoxy composites and their application in multiscale analysis”, Materials and Design, Vol. 221 (2022), Paper N. 110996.

947.

S. Invernizzi, D. Paolino, F. Montagnoli, A. Tridello, A. Carpinteri, “Comparison between fractal and statistical approaches to model size effects in VHCF”, Metals, Vol. 12 (2022), Paper N. 1499.

948.

M. Mairone, R. Asso,, D. Masera, S. Invernizzi, F. Montagnoli, A. Carpinteri, “Fatigue performance analysis of an existing orthotrpic steel deck (OSD) bridge”, Infrastructures,, Vol. 7 (2022), Paper N. 135.

949.

M. Corrado, G. Ventura, A. Carpinteri, “Experimental evidences of flexural to shear to crushing failure mode transition in reinforced concrete beams without stirrups”, Engineering Structures, Vol. 271 (2022), Paper N. 114848.

YEAR 2023

954.

F. Accornero, R. Cafarelli, A. Carpinteri, A. Nanni, “Scale effects in GFRP-bar reinforced concrete beams”, Structural Concrete (FIB), (In press).

955.

A. Di Tommaso, G.C. Olivetti, G. Lacidogna, S. Invernizzi, O. Borla, A. Carpinteri, “Garisenda Tower in Bologna (Italy): Health monitoring by different non-destructive testing techniques”, International Journal of Masonry Research and Innovation, (In press).

956.

A. Di Tommaso, G.C. Olivetti, G. Lacidogna, S. Invernizzi, A. Carpinteri, “Garisenda tower in Bologna (Italy): Structural assessment and numerical simulation”, International Journal of Masonry Research and Innovation, (In press).

                                                                                                                                                                                                 

Home Page