List of publications of Roberto Zanino [last updated March 12, 2011]
 

Papers in international journals

[J1]  R.Zanino,
"Dependence of the Scrape-Off Length on Plasma Elongation and its Influence on Power Deposition Profiles",
Nuovo Cim. 7D (1986) 307-321.

[J2]  R.Zanino and W.Schneider,
"1-D 1-Fluid Scrape-Off Layer Modeling with Finite Elements",
Contrib. Plasma Phys. 30 (1990) 127-132.

[J3]  C.Ferro and R.Zanino,
"Edge Parameters and Scrape-Off Layer Characteristics in IGNITOR",
J. Nucl. Mater. 176&177 (1990) 543-547.

[J4]  R.Zanino,
"Effects of Poloidally Asymmetric Sources in the Scrape-Off Layer",
J. Nucl. Mater. 176&177 (1990) 750-755.

[J5]  R.Zanino,
"Hydrodynamic Modeling of Particle and Angular Momentum Transport in Rotating Tokamak Plasmas with Impurities",
J. Comput. Phys. 98 (1992) 301-316.

[J6]  C.Ferro and R.Zanino,
"Impurity Screening in High Density Plasmas in Tokamaks with a Limiter Configuration",
J. Nucl. Mater. 196&198 (1992) 321-325.

[J7]  R.Zanino,
"Finite Element Fluid Modeling of Axisymmetric Magnetized Boundary Plasma with Recycling Neutrals",
 J. Nucl. Mater. 196&198 (1992) 326-331.

[J8]  R.Zanino, M.Paolini and A.Russo,
"Towards Finite Element Modeling of the Tokamak Scrape-Off Layer",
Contrib. Plasma Phys. 32 (1992) 432-437;
 [J8a]  R.Zanino, "Corrigendum", Contrib. Plasma Phys. 33 (1993) 149-150.

[J9]  R.Zanino and C.Ferro,
"Self-Consistent Impurity Modeling in a Limiter SOL",
Contrib. Plasma Phys. 34 (1994) 337-343.

[J10]  R.Zanino and A.Russo,
"Finite Element Fluid Modeling of a Poloidal Divertor",
Contrib. Plasma Phys. 34 (1994) 410-414.

[J11]  R.Zanino, S.DePalo and L.Bottura,
"A Two-Fluid Code for the Thermohydraulic Transient Analysis of CICC Superconducting Magnets",
J. Fus. Energy 14 (1995) 25-40.

[J12]  S.DePalo, L.Bottura and R.Zanino,
"Computer Analysis of the Thermohydraulic Measurements on CEA Dummy Cables Performed at CEN-Grenoble",
J. Fus. Energy 14 (1995) 49-58.

[J13]  R.Zanino,
"Advances and Issues in the Finite Element Fluid Modeling of the Tokamak Scrape-Off Layer",
Contrib. Plasma Phys. 36 (1996) 407-413.

[J14]  E.Sabbadin and R.Zanino,
"Discrete-Ordinates 1-D Time-Dependent Kinetic Model for Neutral Particles in the Scrape-Off Layer",
Contrib. Plasma Phys. 36 (1996) 333-338.

[J15]  R.Zanino and C.Ferro,
"Global Modeling of Impurity Production and Transport in a Limiter Tokamak Plasma",
Contrib. Plasma Phys. 36 (1996) 260-265.

[J16]  M.L.Apicella, alii, R.Zanino, V.Zanza and M.Zerbini
"Experiments in FTU with different Limiter Materials"
Nucl. Fusion 37 (1997) 381-395.

[J17]  R.Zanino, L.Bottura and C.Marinucci,
"A Comparison between 1- and 2-Fluid Simulations of the QUELL Conductor",
IEEE Trans. Appl. Supercond. 7 (1997) 493-496.

[J18]  R.Zanino,
"Advanced Finite Element Modeling of the Tokamak Plasma Edge",
J. Comput. Phys. 138 (1997) 881-906.

[J19]  R.Zanino, L.Bottura, L.Savoldi and C.Rosso,
"Mithrandir+: a Two-Channel Model for Thermal-Hydraulic Analysis of Cable-in-Conduit Super-Conductors cooled with Helium I or II",
Cryogenics 38 (1998) 525-531.

[J20]  C.Marinucci, L.Bottura, G.Vecsey and R.Zanino,
"The QUELL Experiment as a Validation Tool for the Numerical Code Gandalf",
Cryogenics 38 (1998) 467-477.

[J21]  R.Zanino and F.Subba,
"Adaptive Anisotropic Finite Elements for Edge Plasma Modeling",
Contrib. Plasma Phys. 38 (1998) 355-360.

[J22]  R.Zanino, G.Belgiorno and F.Subba,
"Numerical Solution of a 2-D Conduction-Convection-Radiation Model Problem in Divertor Geometry using Adaptive Finite Elements",
Czech. J. Phys. 48(S2) (1998) 351-356.

[J23]  R.Zanino, C.Ferro, M.Frassinesi and M.Leigheb,
"Self-Consistent Impurity Modeling in the Frascati Tokamak Upgrade",
J. Nucl. Mater. 266&269 (1999) 1290-1295.

[J24]  M.Ciotti, alii and R.Zanino,
"Thermal Pattern Measurements during Disruptions on TEXTOR-94",
J. Nucl. Mater. 266&269 (1999) 1023-1027.

[J25]  R.Zanino, L.Savoldi, F.Tessarin and L.Bottura,
"Effects of Bundle/Hole Coupling Parameters in the Two-Fluid Thermal-Hydraulic Analysis of Quench Propagation in Two-Channel Cable-In-Conduit Conductors",
IEEE Trans. Appl. Supercond. 9 (1999) 608-611.

[J26]  C.Marinucci, L.Savoldi and R.Zanino,
"Stability Analysis of the ITER TF and CS Conductors using the Code Gandalf",
IEEE Trans. Appl. Supercond. 9 (1999) 612-615.

[J27]  R.Zanino and C.Marinucci,
"Heat Slug Propagation in QUELL. Part I: Experimental Setup and 1-Fluid GANDALF Analysis",
Cryogenics 39 (1999) 585-593.

[J28]  R.Zanino and C.Marinucci,
"Heat Slug Propagation in QUELL. Part II: 2-Fluid MITHRANDIR Analysis",
Cryogenics 39 (1999) 595-608.

[J29]  R. Zanino, P. Santagati, L. Savoldi and C. Marinucci,
"Joint + conductor thermal-hydraulic experiment and analysis on the Full Size Joint Sample using MITHRANDIR 2.1",
IEEE Trans. Appl. Supercond. 10 (2000) 1110-1113.

[J30] R. Zanino, P.Santagati, L. Savoldi, A.Martinez and S.Nicollet,
"Friction factor correlation with application to the central cooling channel of cable-in-conduit super-conductors for fusion magnets",
IEEE Trans. Appl. Supercond. 10 (2000) 1066-1069.

[J31] L.Savoldi and R.Zanino,
"M&M: Multi-Conductor Mithrandir Code for the Simulation of Thermal-Hydraulic Transients in Superconducting Magnets",
Cryogenics 40 (2000) 179-189.

[J32] L.Savoldi, P.Michael and R.Zanino,
"Tests and Simulation of Thermal-Hydraulic Transients in the US Prototype Joint Sample",
Int. J. Mod. Phys. B 14 (2000) 3183-3188.

[J33] L.Savoldi and R.Zanino,
"Analysis of Tcs Measurement in Conductor 1A of the ITER Central Solenoid Model Coil using the M&M Code",
Cryogenics 40 (2000) 593-604.

[J34] L.Savoldi and R.Zanino,
"Predictive Study of Current Sharing Temperature Test in the Toroidal Field Model Coil without LCT Coil using the M&M Code",
Cryogenics 40 (2000) 539-548.

[J35] F.Subba and R.Zanino,
"A 2D Fluid Model of the Scrape-Off Layer using Adaptive Unstructured Finite Volumes",
J. Nucl. Mater. 290&293 (2001) 743-747.

[J36] H.Tsuji, K.Okuno, R.Thome, E.Salpietro, S.Egorov, N.Martovetsky, M.Ricci, R.Zanino, alii, L.Savoldi, W.Herz, A.Ninomiya,
"Progress of the ITER Central Solenoid Model Coil Program",
Nucl. Fusion 41 (2001) 645-651.

[J37] J.L. Duchateau, H. Fillunger, S. Fink, R. Heller, P. Hertout, P. Libeyre, R. Maix, C. Marinucci, A. Martinez, R. Meyder, S. Nicollet, S. Raff, M. Ricci, L. Savoldi, A. Ulbricht, F. Wuechner, G. Zahn, R. Zanino,
"Test program preparations of the ITER toroidal field model coil (TFMC)",
Fus. Eng. Des. 58-59 (2001) 147-151.

[J38] T. Kato, H. Tsuji, T. Ando, Y. Takahashi, H. Nakajima, M. Sugimoto, T. Isono, N. Koizumi, K. Kawano, M. Oshikiri, K. Hamada, Y. Nunoya, K. Matsui, T. Shinba, Y. Tsuchiya, G. Nishijima, H. Kubo, E. Hara, H. Hanawa, K. Imahashi, K. Ootsu,
Y. Uno, T. Oouchi, J. Okayama, T. Kawasaki, M. Kawabe, S. Seki, K. Takano, Y. Takaya, F. Tajiri, A. Tsutsumi, T. Nakanura, H. Hanawa, H. Wakabayashi, K. Nishii, N. Hosogane, M. Matsukawa, Y. Miura, T. Terakado, J. Okano, K. Shimada, M. Yamashita, K. Arai, T. Ishigouoka, A. Ninomiya, K. Okuno, D. Bessete, H. Takigami, N. Martovetsky, P. Michael, M. Takayasu, M. Ricci, R. Zanino, L. Savoldi, G. Zahn, A. Martinez, R. Maix,
"First Test Results for the ITER Central Solenoid Model Coil"
Fus. Eng. Des. 56-57 (2001) 49-60.

[J39] L.Savoldi, R.Zanino, V.Marchese, N.Martovetsky, M.Suesser, A.Ulbricht, F.Wuechner and G.Zahn,
"First measurement of the current sharing temperature at 80 kA in the ITER Toroidal Field Model Coil (TFMC)",
IEEE Trans. Appl. Supercond. 12 (2002) 635-638.

[J40] Fillunger, H.; Hurd, F.; Maix, R.K.; Salpietro, E.; Ciazynski, D.; Duchateau, J.-L.; Libeyre, P.; Martinez, A.; Bobrov, E.; Herz, W.; Marchese, V.; Susser, M.; Ulbricht, A.; Wuchner, F.; Zahn, G.; della Corte, A.; Ricci, M.; Theisen, E.; Kraft, G.; Bourquard, A.; Beaudet, F.; Schellong, B.; Zanino, R.; Savoldi, L.,
"Assembly in the test facility, acceptance and first test results of the ITER TF Model Coil",
IEEE Trans. Appl. Supercond. 12 (2002) 595-599.

[J41] Martovetsky, N.; Michael, P.; Minervini, J.; Radovinsky, A.; Takayasu, M.; Gung, C.Y.; Thome, R.; Ando, T.; Isono, T.; Hamada, K.; Kato, T.; Kawano, K.; Koizumi, N.; Matsui, K.; Nakajima, H.; Nishijima, G.; Nunoya, Y.; Sugimoto, M.; Takahashi, Y.; Tsuji, H.; Bessette, D.; Okuno, K.; Mitchell, N.; Ricci, M.; Zanino, R.; Savoldi, L.; Arai, K.; Ninomiya, A.,
"Test of the ITER Central Solenoid Model Coil and CS Insert",
IEEE Trans. Appl. Supercond. 12 (2002) 600-605.

[J42] R. Zanino, L. Savoldi Richard and E. Zapretilina,
"Modeling of Thermal-Hydraulic Effects of AC Losses in the Central Solenoid Insert Coil using the M&M Code",
IEEE Trans. Appl. Supercond. 13 (2003) 1424-1428.

[J43] L. Savoldi Richard, A. Portone and R. Zanino,
"Tests and Analysis of Quench Propagation in the ITER Toroidal Field Conductor Insert",
IEEE Trans. Appl. Supercond. 13 (2003) 1412-1415.

[J44] R. Heller, D. Ciazynski, J.L. Duchateau, V. Marchese, L. Savoldi Richard and R. Zanino,
"Evaluation of the Current Sharing Temperature of the ITER Toroidal Field Model Coil",
IEEE Trans. Appl. Supercond. 13 (2003) 1447-1451.

[J45] Okuno, K.; Martovetsky, N.; Koizumi, N.; Sugimoto, M.; Isono, T.; Hamada, K.; Nunoya, Y.; Matsui, K.; Kawano, K.; Kato, T.; Nakajima, H.; Oshikiri, M.; Takano, K.; Hara, Z.; Takahashi, R.; Kubo, T.; Takahashi, Y.; Mitchell, N.; Takayasu, M.; Minervini, J.; Arai, K.; Tsugawa, K.; Ninomiya, A.; Ricci, M.; Savoldi, L.; Zanino, R.,
"Test of the NbAl Insert and ITER Central Solenoid Model Coil",
IEEE Trans. Appl. Supercond. 13 (2003) 1437-1440.

[J46] Martovetsky, N.; Takayasu, M.; Minervini, J.; Isono, T.; Sugimoto, M.; Kato, T.; Kawano, K.; Koizumi, N.; Nakajima, H.; Nunoya, Y.; Okuno, K.; Tsuji, H.; Oshikiri, M.; Mitchell, N.; Takahashi, Y.; Egorov, S.; Rodin, I.; Zapretilina, E.; Zanino, R.; Savoldi, L.; Arai, K.; Ninomiya, A.; Taran, A.; Vorobieva, A.; Mareev, K.,
"Test of the ITER TF Insert and Central Solenoid Model Coil",
IEEE Trans. Appl. Supercond. 13 (2003) 1441-1446.

[J47] R.Zanino, L.Savoldi Richard and the TFMC Testing Group,
"Performance evaluation of the ITER Toroidal Field Model Coil Phase I. Part 1: Current sharing temperature measurement",
Cryogenics 43 (2003) 79-90.

[J48] R.Zanino and L.Savoldi Richard,
"Performance evaluation of the ITER Toroidal Field Model Coil Phase I. Part 2: M&M analysis and interpretation",
Cryogenics 43 (2003) 91-100.

[J49] R.Zanino, N.Mitchell, and L.Savoldi Richard,
"Analysis and Interpretation of the Full Set (2000-2002) of Tcs Tests in Conductor 1A of the ITER Central Solenoid Model Coil",
Cryogenics 43 (2003) 179-197.

[J50] F. Bellina, T. Bonicelli, M. Breschi, M. Ciotti, A. Della Corte, A. Formisano, Yu Ilyin, V. Marchese, R. Martone, A. Nijhuis, M. Polak, A. Portone, P.L. Ribani, E. Salpietro, L. Savoldi, R. Zanino,
"
Superconductive cables current distribution analysis",
Fus. Eng. Des. 66-68 (2003) 1159-1163.

[J51] F. Subba, and R. Zanino,
Modeling Plasma Wall Interactions in First-Wall Limiter Geometry",
Comp. Phys. Comm. 164 (2004) 377-382.

[J52] R. Zanino, M. Bagnasco, G. Dittrich, W. H. Fietz, H. Fillunger, D. P. Hampshire, R. Heller, P. Komarek, O. Langhans, R. Maix, V. Marchese, N. Martovetsky, N. Mitchell, A. Nijhuis, S. Raff, M. Ricci, M. Suesser, E. Salpietro, L. Savoldi Richard, D. M. J. Taylor, A. Ulbricht, A. Vostner, F. Wuechner and G. Zahn,
"Tcs Tests and Performance Assessment of the ITER Toroidal Field Model Coil (Phase II)",
IEEE Trans. Appl. Supercond. 14 (2004) 1519-1522.

[J53] S. Giors, F. Subba and R. Zanino,
"Navier-Stokes Modelling of a Gaede Pump Stage in the Viscous and Transitional Flow Regimes Using Slip-Flow Boundary Conditions",
 J. Vac. Sci. Technol. A 23 (2005) 336-346.

[J54] Zanino, R.; Bagnasco, M.; Bellina, F.; Bonicelli, T.; dellaCorte, A.; DiZenobio, A.; Fietz, W.H.; Formisano, A.; Heller, R.; Ilyin, Y.; Marchese, V.; Martone, R.; Muzzi, L.; Nijhuis, A.; Polak, M.; Ribani, P.L.; Salpietro, E.; SavoldiRichard, L.; Turtu, S.; Verdini, L.; Zahn, G.R.;
"Current Distribution Measurement on the ITER-Type NbTi Bus Bar III"
Applied Superconductivity, IEEE Transactions on
Volume 15,  Issue 2,  June 2005 Page(s):1407 - 1410

[J55] Marinucci, C.; Bruzzone, P.; dellaCorte, A.; SavoldiRichard, L.; Zanino, R.;
"Pressure Drop of the ITER PFCI Cable-in-Conduit Conductor"
Applied Superconductivity, IEEE Transactions on
Volume 15,  Issue 2,  June 2005 Page(s):1383 - 1386

[J56] Ciazynski, D.; Bessette, D.; Bruzzone, P.; Martovetsky, N.; Stepanov, B.; Wesche, R.; Zani, L.; Zanino, R.; Zapretilina, E.;
"DC Performances of ITER NbTi Conductors: Models vs. Measurements"
Applied Superconductivity, IEEE Transactions on
Volume 15,  Issue 2,  June 2005 Page(s):1355 - 1358

[J57] Bruzzone, P.; Bagnasco, M.; Bessette, D.; Ciazynski, D.; Formisano, A.; Gislon, P.; Hurd, F.; Ilyin, Y.; Martone, R.; Martovetsky, N.; Muzzi, L.; Nijhuis, A.; Rajainmaki, H.; Sborchia, C.; Stepanov, B.; Verdini, L.; Wesche, R.; Zani, L.; Zanino, R.; Zapretilina, E.;
"Test Results of the ITER PF Insert Conductor Short Sample in SULTAN"
Applied Superconductivity, IEEE Transactions on
Volume 15,  Issue 2,  June 2005 Page(s):1351 - 1354

[J58] Zanino, R.; Egorov, S.; Kim, K.; Martovetsky, N.; Nunoya, Y.; Okuno, K.; Salpietro, E.; Sborchia, C.; Takahashi, Y.; Weng, P.; Bagnasco, M.; SavoldiRichard, L.; Polak, M.; Formisano, A.; Zapretilina, E.; Shikov, A.; Vedernikov, G.; Ciazynski, D.; Zani, L.; Muzzi, L.; Ricci, M.; dellaCorte, A.; Sugimoto, M.; Hamada, K.; Portone, A.; Hurd, F.; Mitchell, N.; Nijhuis, A.; Ilyin, Y.;
"Preparation of the ITER Poloidal Field Conductor Insert (PFCI) Test"
Applied Superconductivity, IEEE Transactions on
Volume 15,  Issue 2,  June 2005 Page(s):1346 - 1350

[J59] A. Ulbricht; J.L. Duchateau; W.H. Fietz; D. Ciazynski; H. Fillunger; S. Fink; R. Heller; R. Maix; S. Nicollet; S. Raff; M. Ricci; E. Salpietro; G. Zahn; R. Zanino; M. Bagnasco; D. Bessette; E. Bobrov; T. Bonicelli; P. Bruzzone; M.S. Darweschad; P. Decool; N. Dolgetta; A. della Corte; A. Formisano; A. Gruenhagen; P. Hertout; W. Herz; M. Huguet; F. Hurd; Yu. Ilyin; P. Komarek; P. Libeyre; V. Marchese; C. Marinucci; A. Martinez; R. Martone; N. Martovetsky; P. Michael. N. Mitchell; A. Nijhuis; G. Noether; Y. Nunoya; M. Polak; A. Portone; L. Savoldi Richard; M. Spadoni; M. Suesser; S. Turtu’; A. Vostner; Y. Takahashi; F. Wuechner; and L. Zani;

"The ITER Toroidal Field Model Coil Project"

 Fus. Eng. Des. 73 (2005) 189-327

[J60]    R. Zanino; M. Bagnasco; F. Bellina; P. Gislon; P.L. Ribani and L. Savoldi Richard; 

"Modeling AC losses in the ITER NbTi Poloidal Field Full Size Joint Sample (PF-FSJS) using the THELMA code"

Fus. Eng. Des. 75-79C (2005) 23-27

 

[J61]    R. Zanino; D. Ciazynski; N. Mitchell and L. Savoldi Richard; 

"Coupled mechanical-electromagnetic-thermal-hydraulic effects in Nb3Sn Cable-in-Conduit conductors for ITER "

Supercond. Sci. and Technol. 18 (2005) S376-S382

 

[J62]    R. Zanino and L. Savoldi Richard; 

"A review of thermal-hydraulic issues in ITER cable-in-conduit conductors"

 Cryogenics 46 (2006) 541-555

 

[J63]    Bellina, F.; Ribani, P.L.; Bagnasco, M.; Muzzi, L.; Salpietro, E.; Richard, L.S.; Zanino, R.; 

"Analysis and Simulation of the ITER-Type NbTi Bus BarIII With the THELMA Code"

IEEE Trans. Appl. Supercond. 16 (2006) 1798 - 1802

 

[J64]    Savoldi Richard, L.; Mitchell, N.; Zanino, R.; 

"From Short Sample to Coil DC Superconductor Performance: ITER Central Solenoid Model Coil (CSMC) vs. Good Joint (GJ) Sample"

 IEEE Trans. Appl. Supercond. 16 (2006) 799 - 802

 

[J65]    Ribani, P.L.; Boso, D.P.; Lefik, M.; Nunoya, Y.; Richard, L.S.; Schrefler, B.A.; Zanino, R.; 

"THELMA Code Analysis of Bronze Route Nb3Sn Strand Bending Effect on Ic"

 IEEE Trans. Appl. Supercond. 16 (2006) 860 - 863

 

[J66]    Zanino, R.; Bagnasco, M.; Baker, W.; Bellina, F.; Bruzzone, P.; Della Corte, A.; Ilyin, Y.; Martovetsky, N.; Mitchell, N.; Muzzi, L.; Nijhuis, A.; Nunoya, Y.; Okuno, K.; Rajainmaki, H.; Ribani, P.L.; Ricci, M.; Salpietro, E.; Richard, L.S.; Shikov, A.; Sytnikov, V.; Takahashi, Y.; Taran, A.; Vedernikov, G.; Zapretilina, E.; 

"Implications of NbTi Short-Sample Test Results and Analysis for the ITER Poloidal Field Conductor Insert (PFCI)"

 IEEE Trans. Appl. Supercond. 16 (2006) 886 - 889

 

[J67]    M Ciotti, A Nijhuis, P L Ribani, L Savoldi Richard and R Zanino; 

" THELMA code electromagnetic model of ITER superconducting cables and application to the ENEA stability experiment "

Supercond. Sci. Technol. 19 (2006) 987 - 997


[J68]    S. Giors; E. Colombo; F. Inzoli; F. Subba and R. Zanino;  

" Computational fluid dynamic model of a tapered Holweck vacuum pump operating in the viscous and transition regimes. "

I. Vacuum performance 24 (2006) 1584-1591


[J69]    Zanino, R., Giors, S., and Mondino, R.;  

" CFD modeling of ITER cable-in-conduit superconductors. Part II: Effects of spiral geometry on the central channel pressure drop. "

Fus. Eng. Des. 81 (2006) 2605-2610.


[J70]    F. Subba, A. Airoldi, F. Bombarda, G. Cenacchi, G. Maddaluno, R. Zanino,;  

" Development of a computational tool for limiter edge plasma modeling with application to IGNITOR "

Journal of Nuclear Materials 363-365, 693-697, (2007).


[J71]    R. Zanino, M. Astrov, M. Bagnasco, W. Baker, F. Bellina, D. Ciazynski, S. Egorov, K. Kim, J. L. Kvitkovic, B. Lacroix, N. Martovetsky, N. Mitchell, L. Muzzi, Y. Nunoya, K. Okuno, M. Polak, P. L. Ribani, E. Salpietro, L. Savoldi Richard, C. Sborchia, Y. Takahashi, P. Weng, R. Wesche, L. Zani, E. Zapretilina;

" Predictive Analysis of the ITER Poloidal Field Conductor Insert (PFCI) Test Program "

IEEE Trans. Appl. Supercond. 81 (2006) 2605-2610.


[J72]    P. Bruzzone, M. Bagnasco, D. Ciazynski, A. della Corte, A. Di Zenobio, R. Herzog, Y. Ilyin, B. Lacroix, L. Muzzi, A. Nijhuis, B. Renard, E. Salpietro, L. Savoldi Richard, B. Stepanov, S. Turtu, A. Vostner, R. Wesche, L. Zani, R. Zanino;

" Test Results of Two ITER TF Conductor Short Samples Using High Current Density Nb3Sn Strands "

IEEE Trans. Appl. Supercond. 17 (2007) 1370-1373.


[J73]    L. Savoldi Richard, P. Bruzzone, N. Mitchell, P.L. Ribani, R. Zanino;

" Assessment of the Effect of Current Non-Uniformity on the ITER Nb3Sn Good Joint Short Sample DC Performance "

Trans. Appl. Supercond. 17 (2007) 1382-1385.


[J74]    L. Savoldi Richard, M. Bagnasco and R. Zanino;

" Multi-solid Multi-channel Mithrandir (M3) code for thermal–hydraulic modelling of ITER Cable-in-Conduit Superconductor "

Fus. Eng. Des. 82 (2007) 1607-1613.


[J75]    ZANINO R., BOSO D.P, LEFIK M, RIBANI P.L, SAVOLDI RICHARD L, SCHREFLER B.A;

" Analysis of Bending Effects on Performance Degradation of ITER-Relevant Nb3Sn Strand Using the THELMA Code "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 18 (2008) 1067-1071.


[J76]    BRUZZONE P, BAGNASCO M, CALVI M, CAU F, CIAZYNSKI D, DELLA CORTE A, DI ZENOBIO A, MUZZI L, NIJHUIS A, SALPIETRO E, SAVOLDI RICHARD L., TURTU' S, VOSTNER A, WESCHE R, ZANINO R;

" Test results of two european ITER TF conductor samples in SULTAN "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 18 (2008) 1088-1091.


[J77]    SAVOLDI RICHARD L., R. ZANINO;

" Application of calorimetry to the assessment of ITER Nb3Sn TF conductor sample performance in SULTAN tests "

SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 21 (2008) 0953-2048.


[J78]    SUBBA F., X. BONNIN, D. COSTER, R. ZANINO;

" Fluid Modeling of the ASDEX Upgrade Far SOL Divertor Plasma Including the First Wall "

COMPUTER PHYSICS COMMUNICATIONS, 179 (2008) 194-198.


[J79]    ZANINO R, BELLINA F, RIBANI P.L, SAVOLDI RICHARD L.;

" Coupled thermal-hydraulic/electromagnetic analysis and interpretation of the test results of the ITER TFPRO2 OST1 conductor "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 19 (2009) 1483-1487.


[J80]    BESSETTE D, BOTTURA L, DEVRED A, MITCHELL N, OKUNO K, NUNOYA Y, SBORCHIA C, TAKAHASHI Y, VERWEIJ A, VOSTNER A, ZANINO R., ZAPRETILINA E;

" Test Results From the PF Conductor Insert Coil and Implications for the ITER PF System "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 19 (2009) 1525-1531.


[J81]    SAVOLDI RICHARD L., BESSETTE D, ZANINO R;

" Stability analysis of the ITER PF coils "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 19 (2009) 1496-1499.


[J82]    ZANINO R, BAGNASCO M, CIAZYNSKI D, LACROIX B, VAN LANEN E.P.A, NICOLLET S, NIJHUIS A, SAVOLDI RICHARD L., SBORCHIA C, TORRE A, VOSTNER A, ZANI L;

" EU Contribution to the Test and Analysis of the ITER Poloidal Field Conductor Insert (PFCI) and Central Solenoid Model Coil "

SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 22 (2009) ISSN: 0953-2048.


[J83]    BELLINA F, BESSETTE D, BRESCHI M, DI ZENOBIO A, RIBANI P.L, SAVOLDI RICHARD L., ZANINO R;

" Numerical analysis of the ITER TF conductor samples in SULTAN with the THELMA code "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 19 (2009) 1457-1461.


[J84]    SAVOLDI RICHARD L., CASELLA F, FIORI B, ZANINO R;

" The 4C Code for the Cryogenic Circuit Conductor and Coil modeling in ITER "

CRYOGENICS, 50 (2010) 167-176.


[J85]    ZANINO R., GIORS S., SAVOLDI RICHARD L.;

" CFD model of ITER CICC. Part VI: Heat and mass transfer between cable region and central channel "

CRYOGENICS, 50 (2010) 158-166.


[J86]    SAVOLDI RICHARD L., CLASS A, FIETZ W, HELLER R, RIZZO E, ZANINO R;

" CtFD analysis of HTS current lead fin-type heat exchanger for fusion applications "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 20 (2010) 1733-1736.


[J87]    ZANINO R, BONIFETTO R, SAVOLDI RICHARD L.;

" Analysis of Quench Propagation in the ITER Poloidal Field Conductor Insert (PFCI) "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 20 (2010) 491-494.


[J88]    BENEDETTO S., BERNELLI ZAZZERA F., BERTOLA P., CANTAMESSA M., CERI S., RANCI C., SPAZIANTE A., ZANINO R.;

" Alta Scuola Politecnica: an ongoing experiment in the multidisciplinary education of top students towards innovation in engineering, architecture and design "

EUROPEAN JOURNAL OF ENGINEERING EDUCATION, 35.6 (2010) ISSN: 0304-3797.


[J89]    ZANINO R, BESSETTE D, SAVOLDI RICHARD L.;

" Quench Analysis of an ITER TF Coil "

FUSION ENGINEERING AND DESIGN, 85 (2010) 752-760.


[J90]    SAVOLDI RICHARD L., BELLINA F., BRESCHI M., RIBANI P. L. , SUBBA F. , ZANINO R.;

" Effects of Mass Flow Rate Imbalance among Petals during TCS Measurements of ITER TF Short Samples in SULTAN "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 21 (2010) 1051-8223.


[J91]    ZANINO R., BONIFETTO R., HELLER R., SAVOLDI RICHARD L.;

" Validation of the 4C Thermal-Hydraulic Code against 25 kA Safety Discharge in the ITER Toroidal Field Model Coil (TFMC) "

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, (2011) in press.


[J92]    R. Bonifetto, P. K. Domalapally, G. M. Polli, L. Savoldi Richard, S. Turtu’, R. Villari, R. Zanino;

" Computation of JT-60SA TF coil temperature margin using the 4C Code FUSION ENGINEERING AND DESIGN, (2011) in press.


[J93]    R. Bonifetto, A. Kholia, B. Renard, K. Riße, L. Savoldi Richard, R. Zanino;

" Modeling of W7-X superconducting coil cool-down using the 4C code "

FUSION ENGINEERING AND DESIGN, (2011) in press.


Papers in proceedings of international conferences

[CP1]  W.Feneberg and R.Zanino,
"A Complete Neoclassical Transport Model for the Tokamak Scrape-Off Layer",
Europhysics Conference Abstracts 11D, Part II (1987) 748-751.

[CP2]  R.Zanino, K.Lackner, C.T.Hsu and D.J.Sigmar,
"A 1+1 D Model of Ion-Impurity Pfirsch-Schlueter Transport in a Rotating Tokamak Plasma",
Europhysics Conference Abstracts 13B, Part I (1989) 443-446.

[CP3]  R.Chodura and R.Zanino,
"Impurity Flow at a Divertor Target",
Europhysics Conference Abstracts 15C, Part III (1991) 225-228.

[CP4]  R.Zanino and C.Ferro,
"Self-Consistent Impurity Modeling with Edge/Core Plasma Coupling",
Europhysics Conference Abstracts 18B, Part II (1994) 822-825.

[CP5]  G.Franzoni and R.Zanino,
" Time-Resolved Measurements of Thermal Loads on the FTU Limiter
",
Proceedings of the 16-th IEEE/NPSS Symposium on Fusion Engineering, eds. G.H.Miley and C.M.Elliott, vol.2 (IEEE, Piscataway NJ, 1996) 1043-1046.

[CP6]  R.Zanino,
" Computational Fluid Dynamics in the Plasma Edge of Magnetic Fusion Experiments",
Numerical Methods in Engineering '96, eds. J.-A.Desideri  et al. (Wiley, New York, 1996) 1035-1041.

[CP7]  M.Ciotti, T.Denner, K.H.Finken, J.Hobirk, G.Mank, G.Maruccia, V.Vitale and R.Zanino,
"Infra-Red High Temporal Resolution Thermal Measurements on TEXTOR-94",
Europhysics Conference Abstracts 21A, Part IV (1997) 1749-1752.

[CP8]  R.Zanino, C.Marinucci and L.Savoldi,
" Two-Fluid Analysis of the Thermal-Hydraulic Stability of ITER CS and TF Super-Conductors
",
Proceedings of the 17-th International Cryogenic Engineering Conference (ICEC17), pp. 361-364, Bournemouth, UK, 14-17 July, 1998.

[CP9]  S.DePalo, C.Marinucci and R.Zanino,
"Stability Estimate for CICC with Cooling Channel Using One- and Two-Fluid Codes",
Adv. Cryo. Eng. 43 (1998) 333-339.

[CP10]  R.Zanino, L.Bottura and C.Marinucci,
"Computer Simulation of Quench Propagation in QUELL",
Adv. Cryo. Eng. 43 (1998) 181-188.

[CP11] R.Zanino, N.Martovetsky and L.Savoldi,
"Pretest Analysis of Tcs Measurements in the Central Solenoid Model Coil
",
Proceedings of the 18-th International Cryogenic Engineering Conference (ICEC18), pp. 195-198, Mumbai, India, 21-25 February, 2000.

[CP12] R.Zanino and L.Savoldi,
" Tests and Modeling of Heat Generation and Heat Exchange in the Full Size Joint Sample
",
Proceedings of the 18-th International Cryogenic Engineering Conference (ICEC18), pp. 363-366, Mumbai, India, 21-25 February, 2000.

[CP13] L. Savoldi, L. Bottura and R. Zanino,
" Simulation of Thermal-Hydraulic Transients in Two-Channel CICC with Self-Consistent Boundary Conditions
",
Adv. Cryo. Eng. 45 (2000) 697-704.

[CP14] R.Zanino and L.Savoldi,
" Status and perspectives of thermal-hydraulic analysis of superconducting magnets for nuclear fusion applications
",
IAEA-CSP-8/C CD-ROM Proceedings, Paper FTP2/01 (IAEA, Vienna, May 2001).

[CP15] S.Nicollet, J.L.Duchateau, H.Fillunger, R.Heller, R.Maix, L.Savoldi, G.Zahn and R.Zanino,
“Hydraulic resistance of the ITER Toroidal Field Model Coil dual channel Cable-in-Conduit Conductor pancake”,
Proceedings of the 19-th International Cryogenic Engineering Conference (ICEC19), pp. 161-164 (2002).

[CP16] R.Zanino, C.Y.Gung, K.Hamada and L.Savoldi,
" Pressure drop analysis in the CS Insert Coil
",
Adv. Cryo. Eng. 47 (2002) 364-371.

[CP17] R.Zanino, E.Carpaneto, A.Portone, E.Salpietro and L.Savoldi,
" Inductively driven transients in the CS Insert Coil (I): heater calibration and conductor stability tests and analysis
",
Adv. Cryo. Eng. 47 (2002) 415-422.

[CP18] L.Savoldi, E.Salpietro and R.Zanino,
" Inductively driven transients in the CS Insert Coil (II): quench tests and analysis
",
Adv. Cryo. Eng. 47 (2002) 423-430.

[CP19] K.Hamada, T. Kato, K. Kawano, E. Hara, T. Ando, H. Tsuji, K. Okuno, R.Zanino and L.Savoldi,
" Experimental results of pressure drop measurements in ITER CS Model Coil tests
",
Adv. Cryo. Eng. 47 (2002) 407-414.

[CP20] R.Zanino and L.Savoldi,
"Computational and experimental thermal-hydraulic studies of superconducting magnets for nuclear fusion applications",
Proceedings of the 1st International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics (HEFAT2002), pp. 947-951, Kruger Park, South Africa, 8-10 April 2002.

[CP21] F. Subba, alii, and R.Zanino,
Modeling JET ELMs with the SOLPS edge plasma code
”,
Proceedings of the 30th EPS Conference on Controlled Fusion and Plasma Physics, St. Petersburg, Russia, July 7-11, 2003.

[CP22] R.Zanino and L.Savoldi,
" Refrigeration of Low Temperature Super-Conducting Coils for Nuclear Fusion
",
in Low-temperature and cryogenic refrigeration, NATO Science Series, ISBN 1-4020-1274-8, (Kluwer, Dordrecht, 2003), pp.451-465.

[CP23] G.Zahn, alii, and R.Zanino,
"Cryogenic test results of the ITER TF Model Coil test in TOSKA",
Adv. Cryo. Eng. 49 (2004) 675-684.

[CP24] R. Zanino, P. Bruzzone, D. Ciazynski, M. Ciotti, P. Gislon, S. Nicollet and L. Savoldi Richard,
" Analysis of thermal-hydraulic gravity/buoyancy effects in the testing of the ITER Poloidal Fiels Full Size Joint Sample (PF-FSJS)
",
Adv. Cryo. Eng. 49 (2004) 544-551.

[CP25] R. Zanino, M. Bagnasco, H. Fillunger, R. Heller, L. Savoldi Richard, M. Suesser and G. Zahn,
" Thermal-hydraulic issues in the ITER Toroidal Field Model Coil (TFMC) test and analysis
",
Adv. Cryo. Eng. 49 (2004) 685-692. 

[CP26] D.P. Coster, X. Bonnin, A. Chankin, G. Corrigan, S.K. Erents, W. Fundamenski, J. Hogan, A. Huber, A. Kallenbach, G. Kirnev, A. Kirschner, T. Kiviniemi, S. Kuhn, A. Loarte, J. Lönnroth, G.F. Matthwews, R.A. Pitts, S. Sipilä, J. Spence, J. Strachan, F. Subba, E. Tsitrone, D. Tskhakaya, S. Wiesen, M. Warrier, M. Wischmeier, R. Zanino and contributors to the EFDA-JET work programme,
" Integrated modelling of material migration and target plate power handling at JET",
Proceedings of the 20th IAEA Fusion Energy Conference, Vilamoura, Portugal, 1-6 November 2004, Paper IAEA-CN-116 / TH / P5-18. 

[CP27] B. Coppi; A. Airoldi; F. Alladio; A. Bianchi; F. Bombarda; A. Capriccioli; G. Cenacchi; A. Coletti; R. Coletti; A. Cucchiaro; P. Detregiache; A. Frattolillo; P. Frosi; L. Galbiati; F. Lucchini; G. Maddaluno; R. Maggiora; S. Migliori; B. Parodi; S. Pierattini; A. Pizzuto; G. Ramogida; M. Roccella; M. Romanelli; M. Santinelli; M. Sassi; A. Sestero; F. Subba; R. Zanino; 

" Advances in the Ignitor Program"

Proceedings of the 20th IAEA Fusion Energy Conference, Vilamoura, Portugal, 1-6 November 2004, Paper IAEA-CN-116 /FT/P1-30.

 

[CP28]  P. Bruzzone; B. Stepanov; R. Zanino and L. Savoldi Richard; 

Results of buoyancy-gravity effects in ITER Cable-in_conduit conductor with dual channel”, 

Adv. Cryo. Eng. 51 (2006) 1749-1756.

 

[CP29]  R. Zanino; P. Bruzzone and L. Savoldi Richard;

A critical assessement of pressure drop design criteria for the ITER magnet conductors”, 

Adv. Cryo. Eng. 51 (2006) 1765-1772.

 

[CP30] R. Zanino, S. Giors, and R. Mondino, 

CFD Modeling of ITER Cable-in-Conduit Superconductors. Part I: Friction in the Central Channel”, 

Adv. Cryo. Eng. 51 (2006) 1009-1016.

 

[CP31] B. Coppi, A. Airoldi, R. Albanese, F. Alladio, A. Bianchi, F. Boert, F. Bombarda, A. Cardinali, B. Carmignani, G. Cenacchi, A. Ciampichetti, A. Coletti, R. Coletti, C. Crescenzi, A. Cucchiaro, P. Detragiache, D. Farina, M. Fersini, A. Frattolillo, P. Frosi, A. Licciulli, F. Lucca, F. Lucchini, G. Maddaluno, R. Maggiora, A. Marin, G. Mazzone, S. Migliori, B. Parodi, S. Pierattini, G. Pizzicaroli, A. Pizzuto, G. Ramogida, M. Roccella, M. Romanelli, G. Rubinacci, M. Santinelli, M. Sassi, F. Subba, G. Toselli, F. Villone, R. Zanino, M. Zucchetti, H.G. Wobker,
Highlights of the Physics and Technology for the Ignitor Experiment”,
Proceedings della 21th IAEA Fusion Energy Conference, Chengdu, China, 16-21 October 2006, FT/P5-27.

[CP32] L. Savoldi Richard, D. Bertolotto and R. Zanino,
"Analysis of helium buoyancy and stagnation risk in the ITER TF coils",
Proceedings of the 21-th International Cryogenic Engineering Conference (ICEC21), volume 1, p. 193 (2007)

 

[CP33] R. Zanino, S. Giors,
"CFD modeling of ITER cable-in-conduit superconductors. Part IV: friction factor of the simplest (triplet) bundle",
Proceedings of the 21-th International Cryogenic Engineering Conference (ICEC21), volume 1, p. 201 (2007)

 

[CP34] R. Zanino, S. Giors and L. Savoldi Richard,
"CFD modeling of of ITER cable-in-conduit superconductors. Part III: correlation for the central channel friction factor",
Proceedings of the 21-th International Cryogenic Engineering Conference (ICEC21), volume 1, p. 207 (2007)

 

[CP35] SAVOLDI RICHARD L., ZANINO R,

Stability analysis of the ITER TF conductor,

In: Advances in Cryogenic Engineering, 2008, Vol. 53, pagine da 1269 a 1276, ISBN: 9780735405042

 

[CP36] ZANINO R., S. GIORS,

“CFD modeling of ITER cable-in-conduit superconductor. Part V: combined momentum and heat transfer in rib roughened pipes,

In: Advances in Cryogenic Engineering, 2008 

[CP37] L. SAVOLDI RICHARD, F. CASELLA, B. FIORI, ZANINO R.,

“Development of the Cryogenic Circuit Conductor and Coil (4C) Code for thermal-hydraulic modeling of ITER superconducting coils,

In: Proceedings of the 22nd International Cryogenic Conference (ICEC22), edited by Ho-Myung Chang, et al., 2009, pagine da 619 a 624

Papers presented at international conferences (not in proceedings)

[C1]  D.J.Sigmar, R.Zanino and C.T.Hsu,
"Poloidal Variation of Particle Density and Relaxation of Ambipolar Electric Field in Rotating Tokamak Plasma",
abstract in Bull. Am. Phys. Soc. 32-II (1987) 1917.

[C2]  C.T.Hsu, D.J.Sigmar and R.Zanino,
"Transport Theory of Impure Tokamak Plasma with Strong Rotation in the Pfirsch-Schlueter Regime",
Sherwood Controlled Fusion Theory Conference, Gatlinburg (TN) U.S.A., Paper 3D9 (April 1988).

[C3]  R.Zanino,
"A Fluid Model of Pfirsch-Schlueter Particle and Angular Momentum Transport in a Rotating Tokamak Plasma with Impurities",
abstract in Max-Planck-Institut Report IPP 5/32, Plasma Theory Seminar, Schloss Ringberg R.F.T. (July 1989).

[C4]  R.Chodura and R.Zanino,
"Boundary Relations for a Multi-Fluid Plasma at an Absorbing Target",
4-th International Workshop on Plasma Edge Theory in Fusion Devices, Varenna, Italy (October 1993).

[C5]  C.Ferro, G.Franzoni and R.Zanino,
"A Simple Analysis of the Power Load on the IGNITOR Tokamak during Normal Operation",
abstract in Bull. Am. Phys. Soc. ?? (1994) ???? (also as ENEA Report RT/ERG/FUS/94/14 (1994)).

[C6]  R.Zanino,
"Finite Element Fluid Modeling of Heat Loads on a Toroidal Limiter",
12-th Intnl. Conf. on Plasma Surface Interactions in Contr. Fusion Devices, Saint Raphael, France, 20-24 May 1996.

[C7]  R.Zanino, C.Ferro and M.Frassinesi,
"Estimation of Impurity Concentration and Radiated Power Fraction in IGNITOR",
 6-th International Workshop on Plasma Edge Theory in Fusion Devices, Oxford, UK, 15-17 September, 1997.

[C8]  F.Subba, F.Porcelli, R.Zanino and S.I.Krasheninnikov,
"Kinetic Simulation of a 1-D Plasma in an Asymmetric Scrape-Off Layer with Neutrals",
Edge Plasma Theory and Simulation Workshop, Innsbruck, Austria, 6-8 July, 1998
(abstract in Czech. J. Phys. 48(S2) (1998)  299).

[C9]  F.Subba, O.V.Batishchev and R.Zanino,
"A Comparison Between Different Adaptive Mesh Generation Strategies for Edge Plasma Fluid Modeling",
abstract in Bull. Am. Phys. Soc. 43 (1998) 1756.

[C10]  F.Subba, O.V.Batishchev and R.Zanino,
"A Comparison Between Two Adaptive Numerical Methods for Edge Plasma Fluid Modeling",
abstract in Bull. Am. Phys. Soc. 44 (1999) 1116 (also as Massachusetts Institute of Technology Report PSFC/JA-98-35 (December 1998)).

[C11]  F.Subba, O.V.Batishchev and R.Zanino,
"Application of Adaptive Grid RRC Method to the Fluid Modeling of Edge Plasmas",
7-th International Workshop on Plasma Edge Theory in Fusion Devices, Tajimi, Japan, 4-6 October, 1999.

[C12]  R.Zanino, O.V.Batishchev and F.Subba,
"Comparison of Finite Element and Finite Volume Methods for Magnetized Fluid Plasma Simulation near an Oblique Target",
7-th International Workshop on Plasma Edge Theory in Fusion Devices, Tajimi, Japan, 4-6 October, 1999.

[C13] E.Mazzoli, D.Coster, A.Kallenbach and R.Zanino,
"ASDEX Upgrade SOL currents modelling with B2-solps-5.0 code - first attempts",
Plasma Theory Meeting, Schloss Ringberg, Germany, November 13-17, 2000.

[C14] L. Savoldi Richard, M. Bechis, E. Carpaneto, R. Minero and R.Zanino,
"A code for the analysis of thermal-hydraulic transients in warm-dielectric LN2-cooled high-Tc superconducting power transmission cables",
5-th Workshop on the computation of thermal-hydraulic transients in superconductors (CHATS), Forschungszentrum Karlsruhe, Germany, 16-18 September, 2002.

[C15] M. Ciotti, A. Nijhuis, P. Ribani, L. Savoldi Richard, M. Spadoni and R. Zanino,
"Status of the Thermo-Hydraulic-ELectro-MAgnetic THELMA code and first comparison with the Stability EXperiment (SEX) database",
5-th Workshop on the computation of thermal-hydraulic transients in superconductors (CHATS), Forschungszentrum Karlsruhe, Germany, 16-18 September, 2002.

[C16]   F. Subba; R. Zanino; F. Bombarda; G. Maddaluno; 

"Edge Modelling for Ignitor", 

abstract in Bulletin of the American Physical Society, 49 (8) , p. 79, (2004).

 

[C17]   F. Subba; R. Zanino; A. Airoldi; F. Bombarda; G. Cenacchi; G. Maddaluno; B. Coppi; 

“Ignitor Edge Plasma modelling”, 

abstract in Bulletin of the American Physical Society, 50 (8), p. 201 (2005).

 

[C18]   P. Libeyre, D. Ciazynski, P. Decool, N. Dolgetta, J.L. Duchateau, L. Zani, F. Rondeaux, E. Salpietro, H. Rajainmäki, A. Vostner, W. Baker, A. della Corte, A. Pizzuto, L. Semeraro, L. Moreschi, R. Zanino, W.H. Fietz, R. Heller, A. Nyilas, K. Weiss, P. Bruzzone, A. Nijhuis, D. Hampshire, R. Prokopec, K. Humer, H.W. Weber, R.K. Maix,
“New results and remaining issues in superconducting magnets for ITER and associated R&D in Europe”,
IAEA paper IT/2-1Ra, http://www.swip.ac.cn/xsyd/p1292/ html/node461.htm#91183

 

International laboratory reports

[L1]  D.J.Sigmar, R.Zanino and C.T.Hsu,
"Evolution of Poloidal Variation of Impurity Density and Ambipolar Potential in Rotating Tokamak Plasmas with Impurities: Part I",
Massachusetts Institute of Technology Report PFC/RR-87-8 (September 1987).

[L2]  R.Zanino,
"Evolution of Poloidal Variation of Impurity Density and Ambipolar Potential in Rotating Tokamak Plasmas with Impurities: Part II",
Massachusetts Institute of Technology Report PFC/RR-88-4 (March 1988).

[L3]  R.Zanino, K.Lackner and W.Schneider,
"Space and Time Transformation for the Resolution of Conduction-Convection Boundary Layers",
Max-Planck-Institut Report IPP 5/24 (November 1988).

[L4]  C.Ferro and R.Zanino,
"Computation of the Change of the First Wall-Toroidal Limiter Power Flux Deposition Profile due to Axisymmetric Plasma Displacement for Triangular Simplified Equilibria in a Tokamak: Application to the IGNITOR Case",
ENEA Report RT-FUS-89-26 (December 1989).

[L5]  R.Zanino and R.Chodura,
"Ideal 1-D Flow Driven by Sources",
Max-Planck-Institut Report IPP 5/37 (December 1990).

[L6]  R.Zanino,
"Modeling of Electric Currents in the Scrape-Off Layer",
Max-Planck-Institut Report IPP 5/38 (December 1990).

[L7]  R.Zanino,
"2-Fluid Modeling of Magnetized Plasma Transport in Axisymmetric Domains with Galerkin Finite Elements",
Max-Planck-Institut Report IPP 5/43 (September 1991).

[L8]  "ITER Toroidal Field Model Coil (TFMC) test and analysis summary report Chapter 1: specific analysis results needed for testing",
compiled by P. Libeyre with contributions from: J.L. Duchateau, alii, L. Savoldi, G. Zahn, R.Zanino,
CEA/DRFC report AIM/NTT-2001.005 (May 2001).

[L9] "ITER Toroidal Field Model Coil test program (I): TFMC test without LCT coil",
compiled by E.S.Bobrov, with contributions from A.Ulbricht, alii, R.Zanino,
Forschungszentrum Karlsruhe report FE.5130.0016.0012/Z (June 2001).
 

International meeting presentations

[M1]  R.Zanino, C.Marinucci e L.Savoldi,
"Planned Activities on TFMC Thermal-Hydraulic Analysis",
6-th TFMC Test and Analysis Meeting, November 19, 1998, Cadarache, France.

[M2]  R.Zanino, C.Marinucci e L.Savoldi,
"Status of MITHRANDIR",
7-th TFMC Test and Analysis Meeting, February 5, 1999, Forschungszentrum Karlsruhe, Germany.

[M3]  R.Zanino, L.Guazzotto, C.Marinucci, P.Santagati e L.Savoldi,
"Draft Task Proposal for TFMC Thermal-Hydraulic Modeling Activities at POLITO/CRPP (Phase II)",
8-th TFMC Test and Analysis Meeting, April 22, 1999, CEA Cadarache, France.

[M4]  R.Zanino, L.Guazzotto, C.Marinucci, P.Santagati e L.Savoldi,
"Draft Task Proposal for CSMC Thermal-Hydraulic Modeling Activities at POLITO/CRPP",
1-st EU CSMC Test and Analysis Meeting, April 23, 1999, CEA Cadarache, France.

[M5]  R.Zanino and L.Savoldi,
"Heat Exchange in a Lap-Type Joint",
10-th TFMC Test and Analysis Meeting, December 16, 1999, CEA Cadarache, France.

[M6]  L.Savoldi, L.Guazzotto and R.Zanino,
"Status of CSMC Thermal-Hydraulic Analysis @ POLITO",
2-nd EU CSMC Test and Analysis Meeting, December 16, 1999, CEA Cadarache, France.

[M7]  L.Guazzotto and R.Zanino,
"Net Connection to Naka: Experience from POLITO",
2-nd EU CSMC Test and Analysis Meeting, December 16, 1999, CEA Cadarache, France.

[M8] L.Savoldi and R.Zanino,
"Heat Slug Injection in the TFMC (M&M Code Development)",
11-th TFMC Test and Analysis Meeting, March 20, 2000, Forschungszentrum Karlsruhe, Germany.

[M9] R.Zanino and L.Savoldi,
"Thermal-Hydraulic Analysis of the Joint: Heat Generation and Heat Exchange",
11-th TFMC Test and Analysis Meeting, March 20, 2000, Forschungszentrum Karlsruhe, Germany.

[M10] R.Zanino and L.Savoldi,
"First Predictive Analysis of Tcs Measurement in the TFMC using the M&M Code",
12-th TFMC Test and Analysis Meeting, October 17, 2000, CEA Cadarache, France.

[M11] L.Savoldi and R.Zanino,
"Analysis of Tcs Measurement Data in the CSMC using the M&M Code",
4-th EU CSMC Test and Analysis Meeting, October 18-19, 2000, CEA Cadarache, France.

[M12] R.Zanino and L.Savoldi,
"Preliminary analysis of quench (and stability) in the inductively heated CSIC",
Meeting on the CS Model Coil and CS Insert Coil Test Results, November 9-11, Naka, Japan.

[M13] L.Savoldi and R.Zanino,
"Thermal-Hydraulic Analysis of Tcs Measurement in Conductor 1A of the ITER CSMC using the M&M Code",
Meeting on the CS Model Coil and CS Insert Coil Test Results, November 9-11, Naka, Japan.

[M14] L.Savoldi and R.Zanino,
"Extended Analysis of Tcs Tests in DP1.2 using M&M",
13-th TFMC Test and Analysis Meeting, January 30, 2001, Forschungszentrum Karlsruhe, Germany.

[M15] R.Zanino, T.Kato and L.Savoldi,
"Quenches of the CS Model Coil",
5-th EU CSMC Test and Analysis Meeting, January 31, 2001, Forschungszentrum Karlsruhe, Germany.

[M16] R.Zanino and L.Savoldi,
"Thermal-hydraulic timescales for thermal-hydraulic electromagnetic (THELMA) code",
Meeting on the development of tools for the analysis of AC current distribution in superconducting magnets, March 21, 2001, Politecnico, Torino, Italy.

[M17] R.Zanino, C.Marinucci, L.Savoldi and G.Zahn,
"Draft proposal for thermal-hydraulic (zero-current) pre-tests of the TFMC",
14-th TFMC Test and Analysis Meeting, May 15, 2001, CEA Cadarache, France

[M18] L.Savoldi, E.Carpaneto, A.Portone, E.Salpietro and R.Zanino,
"Status of inductively heated CSIC test modeling",
6-th EU CSMC Test and Analysis Meeting, May 16, 2001, CEA Cadarache, France.

[M19] L.Savoldi and R.Zanino,
"Thermal-hydraulic module for the THELMA code",
Meeting on the development of tools for the analysis of AC current distribution in superconducting magnets, June 26, 2001, EFDA, Garching, Germany.

[M20] R.Minero, L.Savoldi and R.Zanino,
"Thermal-hydraulic modeling of high-Tc superconducting cables for power transmission",
3rd SCENET School on Superconducting Materials and Applications, Anavyssos, Greece, September 22 - October 4, 2001.

[M21] R.Zanino, L.Savoldi and P.L.Ribani,
"Preliminary results on coupling between TH and EM (conductor) modules for THELMA code",
Meeting on the development of tools for the analysis of AC current distribution in superconducting magnets, October 23, 2001, ENEA, Frascati, Italy.

[M22] R.Zanino and L.Savoldi,
"Considerations on thermal-hydraulic sensor accuracy",
15-th TFMC Test and Analysis Meeting, November 20, 2001, CEA Cadarache, France.

[M23] R.Zanino and L.Savoldi,
"Pressure drop analysis in DP1 @ 4 K",
15-th TFMC Test and Analysis Meeting, November 20, 2001, CEA Cadarache, France.

[M24] R.Zanino and L.Savoldi,
"Multi-step heating tests and Tcs measurements",
15-th TFMC Test and Analysis Meeting, November 20, 2001, CEA Cadarache, France.

[M25] R.Zanino and L.Savoldi,
"M&M analysis of measured and expected/design performance in the TFMC Tcs tests",
3rd TFMC Test Group Meeting, January 22-23, 2002, Forschungszentrum Karlsruhe, Germany.

[M26] R.Heller, R.Meyder, S.Nicollet, L.Savoldi, G.Zahn, R.Zanino,
"Thermohydraulic performance of the ITER Toroidal Field Model Coil (ITER-TFMC)",
3rd TFMC Test Group Meeting, January 22-23, 2002, Forschungszentrum Karlsruhe, Germany.

[M27] R.Zanino, A.Portone, L.Savoldi Richard,
"Preliminary analysis of TFCI stability and quench tests",
TFCI Test Result and Analysis Meeting, Efremov Institute, February 28-March 1, 2002, St.Peterburg, Russia.

[M28] R.Zanino and L.Savoldi Richard,
"M&M analysis of TFMC Tcs tests (Phase I) and conductor performance",
16-th TFMC Test and Analysis Meeting, May 28, 2002, Forschungszentrum Karlsruhe, Germany.

[M29] L.Savoldi Richard and R.Zanino,
"Quench propagation and pressure drop on heated pancakes in the TFMC tests (Phase I)",
16-th TFMC Test and Analysis Meeting, May 28, 2002, Forschungszentrum Karlsruhe, Germany.

[M30] R.Zanino, N.Mitchell and L.Savoldi Richard,
"Intrinsic strain assessment of the CSMC and related thermal-hydraulic analysis using M&M",
US-Japan Workshop on Superconducting Magnet Technology, August 12-15, 2002, MIT, Cambridge, MA, USA.

[M31] R.Zanino and L.Savoldi Richard,
"Introduction to the TFMC Tcs tests (Phase I)",
US-Japan Workshop on Superconducting Magnet Technology, August 12-15, 2002, MIT, Cambridge, MA, USA.

[M32] R.Zanino and L.Savoldi Richard,
"M&M analysis of the TFMC Tcs tests (Phase I)",
US-Japan Workshop on Superconducting Magnet Technology, August 12-15, 2002, MIT, Cambridge, MA, USA.

[M33] R.Zanino and L.Savoldi Richard,
"TFMC thermal-hydraulic performance: pressure drop and friction factors",
US-Japan Workshop on Superconducting Magnet Technology, August 12-15, 2002, MIT, Cambridge, MA, USA.

[M34] R.Zanino and L.Savoldi Richard,
"Preliminary re-assessment of the LMI strand database",
17-th TFMC Test and Analysis Meeting, 4-5 February, 2003, CEA Cadarache, France.

[M35] R.Zanino, M.Bagnasco and L.Savoldi Richard,
"TFMC Tcs tests Phase II",
17-th TFMC Test and Analysis Meeting, 4-5 February, 2003, CEA Cadarache, France.

[M36] R.Zanino, M.Bagnasco and L.Savoldi Richard,
"Preliminary considerations on friction in the heated pancakes in TFMC Phase II experiment",
17-th TFMC Test and Analysis Meeting, 4-5 February, 2003, CEA Cadarache, France.

[M37] L. Savoldi Richard, P.L. Ribani and R. Zanino,
“Status of simulations of AC losses in SEx using THELMA”,
THELMA meeting, 1 April, 2003, Politecnico di Torino, Italy.

[M38] L. Savoldi Richard, F. Bellina, P.L. Ribani and R.Zanino,
“New features of the THELMA code (update from Gstaad meeting)”,
THELMA meeting, 1 April, 2003, Politecnico di Torino, Italy.

[M39] R.Zanino, M.Bagnasco and L.Savoldi Richard,
“Assessment of the Model Coil and Insert Coil results”,
ITER Magnet meeting, 6-9 May, 2003, EFDA Garching, Germany.

[M40] F. Subba, F. Turco and R. Zanino,
“Modelling the Energy and Particle Balances During ELMs at JET”,
Presented at the “Edge Modelling Meeting”, JET, 12 May 2003, available from http://users.jet.efda.org/pages/edge-techgrp/2003.05.12/Subba.pdf >

[M41] R.Zanino, F.Bellina, P.L.Ribani and L.Savoldi Richard,
“Heating strategy for CDM and validation of THELMA”,
1st HTS & CDM Test Group Meeting, 21 May, 2003, Forschungszentrum Karlsruhe, Germany.

[M42] R.Zanino, L.Savoldi Richard,
“Comments to AIM/NTT 2003.018”,
1st Meeting on CICC thermal-hydraulics, 3 June, 2003, CEA Cadarache, France.

[M43] R.Zanino, L.Savoldi Richard,
“Comments to AIM/NTT 2003/008 + REF/NTT 2002/001”,
1st Meeting on CICC thermal-hydraulics, 3 June, 2003, CEA Cadarache, France.

[M44] M. Ciotti, A. Nijhuis, P.L. Ribani, L. Savoldi Richard and R. Zanino,
“Validation of THELMA against AC loss measurements in Sex",
THELMA meeting, 1 July, 2003, ENEA Frascati, Italy.

[M45] F. Bellina, P.L. Ribani, L. Savoldi Richard and R. Zanino,
“Preliminary proposal for CDM test in BBIII",
2nd HTS & CDM Test Group Meeting, 3 July, 2003, Forschungszentrum Karlsruhe, Germany.

[M46] L.Savoldi Richard and R.Zanino,
“Analysis of first HECOL data with the MITHRANDIR code",
2nd Meeting on CICC thermal-hydraulics, 23-24 July, 2003, CEA Cadarache, France.

[M47] R.Zanino and L.Savoldi Richard,
“Considerations on the friction factor measurements in OTHELLO”,
2nd Meeting on CICC thermal-hydraulics, 23-24 July, 2003, CEA Cadarache, France.

[M48] F. Bellina, A. della Corte, P.L. Ribani, L. Savoldi Richard, S.Turtu’, and R. Zanino,
“Status of the test program for BBIII (CDM test and THELMA validation)”
3rd HTS & CDM Test Group Meeting, 7 October, 2003, Forschungszentrum Karlsruhe, Germany.

[M49] M.Bagnasco, L.Savoldi Richard and R.Zanino,
“POLITO preliminary analysis of the HECOL results”,
3rd Meeting on CICC thermal-hydraulics, 19 November, 2003, CEA Cadarache, France.

[M50] L.Savoldi Richard, P.L. Ribani and R.Zanino,
"First validation of THELMA (EMC + TH) vs. SEx",
THELMA meeting, 21 November, 2003, ENEA Frascati, Italy.

[M51] R.Zanino,
"Proposal for next steps in THELMA validation and application",
THELMA meeting, 21 November, 2003, ENEA Frascati, Italy.
 

[M52] R.Zanino and L.Savoldi Richard,
“Pressure drop issues in ITER CICC”,
ITER Magnet Expert Meeting, February 3-5, 2004, Garching, Germany.

[M53] L.Savoldi Richard, D.Bertolotto and R.Zanino,
“Status of the task CODES (POLITO)”
ITER Magnet Expert Meeting, February 3-5, 2004, Garching, Germany.

[M54] L.Savoldi Richard, D.Bertolotto and R.Zanino,
“Status of quench propagation analysis in the Nb3Al Insert Coil”
ITER Magnet Expert Meeting, February 3-5, 2004, Garching, Germany.

[M55] F.Bellina, D.Boso, P.L.Ribani, L.Savoldi Richard and R.Zanino,
“THELMA status”
ITER Magnet Expert Meeting, February 3-5, 2004, Garching, Germany.

[M56] R.Zanino,
“Status of PFCI TG actions after the Morioka TGM (22.10.03)”,
ITER Magnet Expert Meeting, February 3-5, 2004, Garching, Germany.

[M57] R.Zanino, F.Bellina, A.Formisano, L.Savoldi Richard and S. Turtu’,
Proposal for CDM and THELMA validation test program on BBIII”
4th HTS-CL TGM , February 3, 2004, Garching, Germany.

[M57a] F. Subba, F. Turco and R. Zanino,
"Modelling of ELMs on JET with SOLPS",
http://users.jet.efda.org/pages/e-task-force/index.html

JET Edge Modelling Meeting, 12 February 2004

[M58] R.Zanino, M.Bagnasco and L.Savoldi Richard,
“Polito ongoing activities on the PFCI-FSJS conductor campaign”
PFCI-FSJS Testing Group Meeting, May 6, 2004, Villigen, Switzerland.

[M59]  M. Bagnasco, F. Bellina, P. Ribani, L.Savoldi Richard and R.Zanino
“THELMA validation against AC losses in the PF-FSJS conductor”
THELMA Meeting, May 26 2004, Turin, Italy.

[M60] M. Bagnasco, F. Bellina, A. Portone, P. Ribani, L.Savoldi Richard and R.Zanino
“POLITO ongoing activity on PFCI-FSJS quadrupoles analysis”
THELMA Meeting, May 26 2004, Torino, Italy.

[M61] L.Savoldi Richard, M.Bagnasco and R.Zanino
“Further development of THELMA thermal-hydraulic model
THELMA Meeting, May 26 2004, Torino, Italy.

[M62] M. Bagnasco, F. Bellina, A. Portone, P. Ribani, L.Savoldi Richard and R.Zanino,
“Preliminary THELMA analysis of quadrupole signals in the PFCI-FSJS”,
PFCI-FSJS Testing Group Meeting, July 6, 2004, Villigen, Switzerland.

[M63] M. Bagnasco, F. Bellina, P.Gislon, P. Ribani, L.Savoldi Richard and R.Zanino
“Status of AC losses THELMA analysis in the PF and PFCI FSJSs
THELMA Meeting, July 20, 2004, Bologna, Italy

[M64] R. Zanino, M. Bagnasco, F. Bellina, T. Bonicelli, A. della Corte, A. Di Zenobio, W. H. Fietz, A. Formisano, R. Heller, V. Marchese, R. Martone, L. Muzzi, P. L. Ribani, E. Salpietro, L. Savoldi Richard, L. Verdini and G. R. Zahn,
“Current distribution measurement on the ITER-type NbTi Bus Bar III”
THELMA Meeting, July 20, 2004, Bologna, Italy

[M65] M. Bagnasco, F. Bellina, P. Ribani, L.Savoldi Richard and R.Zanino
“Status of analysis of HP & quadrupole signals in the PFCI-FSJS using THELMA”
THELMA Meeting, October 20, 2004, Torino, Italy.

[M66] F. Bellina, M. Bagnasco, P. L. Ribani, L. Savoldi Richard, R. Zanino
“First analysis of BB-III magnetic field configuration”
Final HTS-CL/CDM Test Group Meeting, Nov 17, 2004, Karlsruhe, Germany

[M67] R. Zanino, M. Bagnasco, F. Bellina, T. Bonicelli, A. della Corte, A. Di Zenobio, W. H. Fietz, A. Formisano, R. Heller, Y. Ilin, V. Marchese, R. Martone, L. Muzzi, A. Nijhuis, M. Polak, P. L. Ribani, E. Salpietro, L. Savoldi Richard, S. Turtu’, L. Verdini and G. R. Zahn
“Overview of the experimental results of BBIII”
Final HTS-CL/CDM Test Group Meeting, Nov 17, 2004, Karlsruhe, Germany.

[M68] M. Bagnasco, F. Bellina, P.L. Ribani, L. Savoldi Richard, R. Zanino
“SIMULATION OF THE BBIII EXPERIMENT WITH THE THELMA CODE”
Final HTS-CL/CDM Test Group Meeting, Nov 17, 2004, Karlsruhe, Germany

[M69] L.Savoldi Richard, S.Dessi and R.Zanino
“Status of the analysis of the pressure drop tests”
Final meeting on task CODES, Dec. 1, 2004, Torino, Italy

[M70] L.Savoldi Richard and R.Zanino
“Status of the analysis of the HECOL heat transfer tests”
Final meeting on task CODES, Dec. 1, 2004, Torino, Italy

[M71] .Bagnasco, L.Savoldi Richard and R.Zanino
“First analysis of PFCI-FSJS thermal-hydraulic tests”
PFCI-FSJS Meeting, Dec. 14, 2004, Villigen, Switzerland.

[M72] R. Zanino and L. Savoldi Richard
“Some open issues in CICC thermal-hydraulics
ITER conductor meeting, January 25-28, 2005, Muerren, Switzerland.

[M73] R.Zanino,
“Status of the ITER Poloidal Field Conductor Insert (PFCI) activities”
ITER conductor meeting, January 25-28, 2005, Muerren, Switzerland.

[M74] R.Zanino, P. Decool, L.Savoldi Richard
“Status of the analysis of HECOL transient heat transfer tests”
ITER conductor meeting, January 25-28, 2005, Muerren, Switzerland.

[M75] R. Zanino, M. Bagnasco, F. Bellina, A. della Corte, A. Di Zenobio, L. Muzzi, P. L. Ribani, L. Savoldi Richard and S. Turtu’, the BBIII Testing Group and the TOSKA Operation Group,
“Experimental results and interpretation of the ITER-type NbTi Bus Bar III”
ITER conductor meeting, January 25-28, 2005, Muerren, Switzerland.

[M76] R. Zanino, M. Bagnasco, N. Mitchell and L. Savoldi Richard
“ITER Model Coils vs. short samples: Preliminary DC performance assessment using interpolative strand scaling”
ITER conductor meeting, January 25-28, 2005, Muerren, Switzerland.

[M77] M. Bagnasco, F. Bellina, P.L. Ribani, L. Savoldi Richard and R. Zanino,
“Status of analysis of TCS tests in the PFCI-FSJS using THELMA
THELMA Meeting, March 10, 2005, Frascati, Italy.

[M78] D. Boso, P.L. Ribani, L. Savoldi Richard and R. Zanino
“Modeling the effect of Furukawa Nb3Sn strand bending on Ic using THELMA: approach and status
THELMA Meeting, March 10, 2005, Frascati, Italy.

[M79] R. Zanino, M. Bagnasco, F. Bellina, P. L. Ribani and L. Savoldi Richard,
“Summary of THELMA-related activities
THELMA Meeting, March 10, 2005, Frascati, Italy.

[M80] F. Bellina, M. Bagnasco, P. L. Ribani, L. Savoldi Richard and R. Zanino
“BB-III current distribution identification and SVD problem assessment
THELMA Meeting, March 10, 2005, Frascati, Italy.

[M81] R. Zanino and L.Savoldi Richard
“Status of PoliTo activities”
EU Magnet Experts Meeting, April 26-27, 2005, Garching, Germany,

[M82] R. Zanino and L.Savoldi Richard
“PoliTo proposals of new activities”
EU Magnet Experts Meeting, April 26-27, 2005, Garching, Germany,

[M83]  F. Subba and R. Zanino; 

“2D Edge Plasma Fluid Modelling Including Limiter and First Wall”,

 seminar at EFDA-JET, 23 February 2006-09-18.

 

[M84]  F. Subba and R. Zanino;

“ASPOEL-SOLPS code coupling project”, 

Integrated Tokamak Modelling Task Force General Meeting, September 13-15 2006, Cadarache (France).

 

[M85]  F. Subba and R. Zanino,
F. Subba and R. Zanino, “Fluid 1D ELM Modelling Status Report”,
9th ITPA SOL/divertor meeting, May 7 – 10, 2007, Garching, (Germany).

 

[M86]  F. Subba and R. Zanino,
Fluid Modelling of the Far-SOL Region (Preliminary Status)
”,
9th ITPA SOL/divertor meeting, Garching, May 7 – 10, 2007.

 

[M87]  F. Subba, X. Bonnin1, D. Coster2 and R. Zanino,
2D Fluid Modeling of the ASDEX Upgrade Far SOL”,
Integrated Tokamak Modelling Task Force General Meeting, September 19 – 21 2007, Garching (Germany).

 

Papers in national journals

[R1]  R.Zanino,
"Introduzione ai Problemi della Fusione Nucleare Controllata",
CH4 Energia e Metano 4 (1987) 23-29.
(in Italian)

[R2] Y.Takahashi, alii, R.Zanino, L.Savoldi and A. Martinez,
"Test Results of ITER Model Coil - 13 T-640 MJ Nb3Sn Pulse Coil",
Japanese Cryogenic Engineering 35 (2000) 357-362.
(in Japanese)
 

Papers at national conferences

[N1]  R.Zanino,
"Confronto tra le Interazioni Plasma-Parete nei Tokamak con Limiter e in quelli con Divertore",
Atti del LXXIX Congresso Nazionale della SIF (1993) 82. (Invited paper)

[N2]  R.Zanino,
"Finite Element Modeling of the Plasma Edge in Magnetic Fusion Experiments",
Atti del II Congresso Nazionale della SIMAI (1994) 96-98.

[N3]  S.Depalo, L.Savoldi and R.Zanino,
"Numerical Modeling of Thermal-Hydraulic Transients in low Tc Super-Conductors",
Atti del XV Congresso Nazionale sulla Trasmissione del Calore (1997) 733-742.

[N4]  G.Cucinotta, A.Gulli' and R.Zanino,
"Analisi Bidimensionale agli Elementi Finiti del Ribagnamento di una Superficie Calda", (in Italian)
Atti del XV Congresso Nazionale sulla Trasmissione del Calore (1997) 721-731.

[N5]  R.Zanino,
"Thermal-Fluid Dynamic Model of Plasma-Wall Interactions in Tokamak Fusion Experiments",
Atti del XV Congresso Nazionale sulla Trasmissione del Calore (1997) 935-944.

[N6] L.Savoldi Richard and R.Zanino,
"The role of thermal-hydraulics in the ITER superconducting Central Solenoid Model Coil (CSMC) experiments",
Atti del XX Congresso Nazionale sulla Trasmissione del Calore (2002) 475-480.

[N7] R.Zanino and L.Savoldi Richard,
"The role of thermal-hydraulics in the ITER superconducting Toroidal Field Model Coil (TFMC) experiments",
Atti del XX Congresso Nazionale sulla Trasmissione del Calore (2002) 545-550.

[N8] M.Bagnasco, L.Savoldi Richard and R.Zanino,
"Effect of a resistive heater on the supercritical helium dynamics in the ITER superconducting Toroidal Field Model Coil experiments",
Atti del XXI Congresso Nazionale sulla Trasmissione del Calore (2003) 483-488.

[N9] F. Subba, F. Turco and R. Zanino,
"
Modeling of heat loads on the JET divertor during edge localized modes
",
Atti del XXI Congresso Nazionale sulla Trasmissione del Calore (2003) 489-494.

[N10] L.Savoldi Richard and R.Zanino,
"Correlazioni per fattori d'attrito nei cavi superconduttori di ITER",
Atti del LVIII Congresso Annuale dell'ATI (2003) 2213-2224.


[N11]
R. Zanino, G. Vecchi, M. Ferraris, M. Zucchetti, G. Vella, E. Oliveri, V. Coccorese, A. Pizzuto, F. Gnesotto, G. Bonizzoni,
" Tecnologie della fusione nucleare in Italia: Ricerca e innovazione",
Atti (CD) dellla Conferenza nazionale sulla politica energetica in Italia, Bologna, 18-19 Aprile 2005.

[N12]   F. Subba and R. Zanino; 

Advanced Methods for the Evaluation of the Heat Flux Distribution onto the First Wall of a Tokamak”, 

Atti del XXIV Congresso Nazionale sulla Trasmissione del Calore (2006), 673 - 678.
 

Politecnico di Torino reports

[D1]  R.Zanino and B.Coppi,
"Introduzione alla Fisica della Interfaccia Plasma-Parete nei Tokamak",
Politecnico di Torino Report PT DE IN 141 (November 1988).

[D2]  R.Zanino,
"A Model for Impurity Screening in Limiter Tokamaks",
Politecnico di Torino Report PT DE IN 247 (December 1990).

[D3]  R.Zanino,
"Finite Element Solution of a 2-D Time-Dependent Nonlinear Anisotropic Conduction-Convection Equation",
Politecnico di Torino Report PT DE IN 260 (June 1991).

[D4]  R.Zanino and L.Savoldi,
"Stability Modeling of ITER CS and TF CICC using the MITHRANDIR Code",
Politecnico di Torino Report PT DE 478/IN (April 1998).

[D5]  R.Zanino,
"
Effects of High-Z Limiter/First Wall on the IGNITOR Plasma",
Politecnico di Torino Report PT DE 501/IN (January 1999).

[D6]  L.Savoldi and R.Zanino,
"Thermal-hydraulic tests on the SS-FSJS experiment",
Politecnico di Torino Report PT-DE 513/IN (September 1999).

[D7]  L.Savoldi and R.Zanino,
"Thermal-hydraulic tests on the TFMC-FSJS experiment",
Politecnico di Torino Report PT-DE 514/IN (October 1999).
 

Other (Schools, etc.)

[O1] R.Zanino,
"Introduzione ai problemi di termofluidodinamica computazionale nella fusione termonucleare controllata" (in Italian),
Scuola UIT di Termofluidodinamica computazionale, Certosa di Pontignano (SI), 2-8 Settembre, 2001.

[O2] R.Zanino and L.Savoldi,
"
Termofluidodinamica computazionale applicata allo studio di magneti superconduttori per la fusione nucleare
",
Scuola UIT di Termofluidodinamica computazionale, Certosa di Pontignano (SI), 2-8 Settembre, 2001.

[O3] R.Zanino and F.Subba,
"Termofluidodinamica computazionale applicata allo studio delle interazioni plasma-parete nei tokamak",
Scuola UIT di Termofluidodinamica computazionale, Certosa di Pontignano (SI), 2-8 Settembre, 2001.

[O4] R. Zanino, M. Bagnasco, L. Savoldi Richard and the TFMC Testing Group,
"Preliminary analysis of TFMC Tcs tests Phase II",
Report distributed by E-mail to test group members, 24 November, 2002.

[O5] S. Giors, F. Subba, and R. Zanino,
"Numerical results of CFD analysis of a 2D model of single stage Gaede drag pump",
VGD-13 workshop, Avila, Spain, June 29 - July 3, 2003.

[O6]     F. Subba and R. Zanino;

 “Plasma-Wall Interaction Modeling for IGNITOR at POLITO”, 

Ignitor physics meeting, 11 November 2003, Milano ( Italy ).

[O7]     F. Subba and R. Zanino; 

“Producing a grid for IGNITOR edge modelling”, 

Ignitor meeting, 19 December 2003, Frascati ( Italy ).

[O8]     F. Subba and R. Zanino; 

“IGNITOR Plasma Wall Interactions Modeling (Status January 2004)”, 

Ignitor meeting, 23 January 2004, Frascati ( Italy ).

[O9]     F. Subba and R. Zanino; 

“IGNITOR edge modelling at POLITYO (Recall of old activity and new developments progress report)”, 

Ignitor meeting, 14 May 2004, Frascati ( Italy ).

[O10]   F. Subba and R. Zanino; 

“Geometrical effects on the heat load distribution onto the IGNITOR first wall”, 

Ignitor meeting, 19 October 2004, Frascati ( Italy ).

[O11]   F. Subba and R. Zanino;

 “3D Modelling of the heat load on the IGNITOR first wall/limiter: implementation and first results”, 

Ignitor meeting, 29 November 2004, Frascati ( Italy ).

 

[O12]   F. Subba and R. Zanino; 

“Progress in IGNITOR plasma-wall interaction analysis at POLITO”, 

Ignitor meeting, 15 February 2005, Frascati ( Italy )

 

[O13]   F. Subba and R. Zanino;

 “Advances and Perspective in 2D Code Development for Edge Plasma Modelling in IGNITOR”, 

Ignitor meeting, 26 May 2005, Frascati, ( Italy ). 

 

[O14]   F. Subba and R. Zanino; 

“Advances in 2D self consistent modeling of the IGNITOR edge plasma”, 

Ignitor meeting, 2 August 2005, Frascati ( Italy ).

 

[O15]   F. Subba and R. Zanino; 

“Code Development for IGNITOR Edge Plasma Modelling”, 

Ignitor meeting, 2 December 2005, Frascati ( Italy ).

 

[O16]   F. Subba and R. Zanino; 

“Status and perspective of IGNITOR Edge Modelling Activities at PoliTo”, 

Ignitor meeting, 26 June 2006, Frascati ( Italy ).
 

[O17]   R. Zanino, S. Giors, L. Savoldi Richard, F. Subba,
Computational thermal-Fluid-Dynamics (CtFD) Issues in Nuclear Fusion Reactors”,
Scuola Estiva UIT, Certosa di Pontignano, 8 Settembre 2006.

 [O18]   M. Cali’, G.V. Fracastoro, B. Panella, and R. Zanino
Can the nuclear sources contribute to the solution of climate change and energy issues?”,
13 March 2008, Villahermosa, (Mexico).