Glass T&am:  Publications

HOME

RESEARCH

PUBLICATIONS

TEACHING

LINKS & MORE

 

 

 

 

 

 

 

 

 

 

Publications in international refereed journals

 

38.    S. Dalle Vacche, S. Forzano, A. Vitale, M. Corrado, R. Bongiovanni (2019) Glass lap joints with UV-cured adhesives: Use of a perfluoropolyether methacrylic resin in the presence of an acrylic silane coupling agent. International Journal of Adhesion and Adhesives, Vol. 92 (2019), 16-22. (doi: 10.1016/j.ijadhadh.2019.04.003)

 

37.    G. Mariggiò; J. Reinoso, M. Paggi, M. Corrado (2018)    Peeling of thick adhesive interfaces: The role of dynamics and geometrical nonlinearity. Mechanics Research Communications, Vol. 594 (2018), 21-27. (doi: 10.1016/j.mechrescom.2018.08.018)

 

36.    A. Cuba Ramos, C. Roux-Langlois, C.F. Dunant, M. Corrado, J.-F. Molinari (2018) HPC simulations of alkali-silica reaction-induced damage: Influence of alkali-silica gel properties. Cement and Concrete Research, Vol. 109 (2018), 90-102. (doi: 10.1016/j.cemconres.2018.03.020)

 

35.    M. Paggi, M. Corrado, J. Reinoso (2018) Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field–cohesive zone model approach”, Computational Method in Applied Mechanics and Engineering, Vol. 330 (2018), 123-148 (doi: 10.1016/j.cma.2017.10.021)

 

34.    M. Vocialta, M. Corrado, J.-F. Molinari (2018) Numerical analysis of fragmentation in tempered glass with parallel dynamic insertion of cohesive elements”, Engineering Fracture Mechanics, Vol. 188 (2018), 448-469 (doi: 10.1016/j.engfracmech.2017.09.015)

 

33.    Y. Li, B. Gong, M. Corrado, C. Deng, D. Wang (2017) Experimental investigation of out-of-plane constraint effect on fracture toughness of the SE(T) specimens”, International Journal of Mechanical Sciences, Vol. 128-129 (2017), 644-651 (doi: 10.1016/j.ijmecsci.2017.06.002))

 

32.    M. Corrado, A. Infuso, M. Paggi (2017) Simulated hail impacts on flexible photovoltaic laminates: testing and modelling. Meccanica, Vol. 52 (2017), 1425-1439. (doi: 10.1007/s11012-016-0483-2)

 

31.    M. Corrado, J.-F. Molinari (2016) Effects of residual stresses on the tensile fatigue behavior of concrete. Cement and Concrete Research, Vol. 89 (2016), 206-219. (doi: 10.1016/j.cemconres.2016.08.014)

 

30.    Q. Trinh, A. Raby, D. Banfi, M. Corrado, B. Chiaia, Y. Rafiq, F. Calì (2016) Modelling the Eddystone Lighthouse response to wave loading” Engineering Structures, Vol. 125 (2016), 566-578. (doi: 10.1016/j.engstruct.2016.06.027)

 

29.    M. Paggi, M. Corrado, I. Berardone (2016) A global/local approach for the prediction of the electric response of cracked solar cells in photovoltaic modules under the action of mechanical loads. Engineering Fracture Mechanics, Vol. 168 (2016), 40-57. (doi: 10.1016/j.engfracmech.2016.01.018)

 

28.    A. Carpinteri, G. Lacidogna, M. Corrado, E. Di Battista (2016) Cracking and crackling in concrete-like materials: A dynamic energy balance. Engineering Fracture Mechanics, Vol. 155 (2016), 130-144. (doi: 10.1016/j.engfracmech.2016.01.013)

 

27.    F. Spertino, A. Ciocia, P. Di Leo, R. Tommasini, I. Berardone, M. Corrado, A. Infuso, M. Paggi: “A power and energy procedure in operating photovoltaic systems to quantify the losses according to the causes” Solar Energy, Vol. 118, (2015), 313-326. (doi: 10.1016/j.solener.2015.05.033).

 

26.    P. Cornetti, M. Corrado, A. Carpinteri, L. De Lorenzis: “An analytical cohesive crack modeling approach to the edge debonding failure of FRP-plated beams” International Journal of Solids and Structures, Vol. 53, (2015), 92-106. (doi: 10.1016/j.ijsolstr.2014.10.017).

 

25.    M. Corrado, M. Paggi: “Nonlinear fracture dynamics of laminates with finite thickness adhesives”, Mechanics of Materials, Vol. 80 (2015), 183-192. (doi: 10.1016/j.mechmat.2014.07.012)

 

24.    M. Paggi, I. Berardone, A. Infuso, M. Corrado: “Electrical recovery and fatigue degradation phenomena in cracked silicon cells”, Journal of Energy Challenges and Mechanics, Vol. 1 (2014), No. 1, article 4, 1-5 (ISSN 2056-9386).

 

23.    M. Corrado, M. Paggi, A. Carpinteri: “A multi-scale numerical method for the study of size-scale effects in ductile fracture”, Metals, Vol. 4 (2014), 428-444. (doi:  10.3390/met4030428)

 

22.    I. Berardone, M. Corrado, M. Paggi: “A generalized electric model for mono and polycrystalline silicon in the presence of cracks and random defects”, Energy Procedia, (2014).

 

21.    A. Carpinteri, E. Cadamuro, M. Corrado: “Minimum flexural reinforcement in rectangular and T-section concrete beams”, Structural Concrete, (2014). (doi: 10.1002/suco.201300056)

 

20.    M. Corrado, M. Paggi: “Dynamic nonlinear crack growth at interfaces in multi-layered materials”, Procedia Materials Science, Vol. 3 (2014), 1971-1976. (doi: 10.1016/j.mspro.2014.06.317)

 

19.    A. Infuso, M. Corrado, M. Paggi: “Image analysis of polycrystalline solar cells and modeling of intergranular and transgranular cracking”, Journal of the European Ceramic Society, Vol. 34 (2014), 2713-2722. (doi: 10.1016/j.Jeurceramsoc.2013.12.051)

 

18.    M. Paggi, I. Berardone, A. Infuso, M. Corrado: “Fatigue degradation and electric recovery in Silicon solar cells embedded in photovoltaic modules”, Scientific Reports, 4:4506 (2014) (doi: 10.1038/srep04506)

 

17.    A. Carpinteri, M. Corrado, G. Lacidogna: “Heterogeneous materials in compression: Correlations between absorbed, released and acoustic emission energies”, Engineering Failure Analysis, Vol. 33 (2013), 236-250. (doi: 10.1016/j.engfailanal.2013.05.016)

 

16.    M. Paggi, M. Corrado, M. A. Rodriguez: “A multi-physics and multi-scale numerical approach to microcracking and power-loss in photovoltaic modules”, Composite Structures, Vol. 95 (2013), 630-638. (doi: 10.1016/j.compstruct.2012.08.014)

 

15.    A. Carpinteri, M. Corrado, G. Lacidogna: “Three different approaches for damage domain characterization in disordered materials: Fractal energy density, b-value statistics, renormalization group theory”, Mechanics of Materials, Vol. 53 (2012), 15-28. (doi: 10.1016/j.mechmat.2012.05.004)

 

14.    A. Carpinteri, M. Corrado, G. Lacidogna, S. Cammarano: “Lateral load effects on tall shear wall structures of different height”, Structural Engineering and Mechanics, Vol. 41, No. 3 (2012), 313-337.

 

13.    A. Carpinteri, B. Gong, M. Corrado: “Hardening cohesive/overlapping zone model for metallic materials: The size-scale independent constitutive law”, Engineering Fracture Mechanics, Vol. 82 (2012), 29-45. (doi: 10.1016/j.engfracmech.2011.11.021)

 

12.    A. Carpinteri, M. Corrado, G. Goso, M. Paggi: “Size-scale effects on interaction diagrams for reinforced concrete columns”, Construction and Building Materials, Vol. 27 (2012), 271-279. (doi: 10.1016/j.conbuildmat.2011.07.047)

 

11.    M. Corrado, E. Cadamuro, A. Carpinteri: “Dimensional analysis approach to study snap back-to-softening-to-ductile transitions in lightly reinforced quasi-brittle materials”, International Journal of Fracture, Vol. 172, No. 1 (2011), 53-63. (doi: 10.1007/s10704-011-9646-2)

 

10.    A. Carpinteri, M. Corrado: “Upper and lower bounds for structural design of RC members with ductile response”, Engineering Structures, Vol. 33 (2011), 3432-3441. (doi: 10.1016/j.engstruct.2011.07.007)

 

9.       A. Carpinteri, M. Corrado, M. Paggi: “An analytical model based on strain localisation for the study of size-scale and slenderness effects in uniaxial compression tests”, Strain, Vol. 47, No. 4 (2011), 351-362. (doi: 10.1111/j.1475-1305.2009.00715.x)

 

8.       M. Corrado, M. Paggi, A. Carpinteri: “Limits to plastic analysis due to size-scale effects on the rotational capacity of reinforced concrete cross sections”, Structural Engineering International, Vol. 20, No. 3 (2010), 240-245.

 

7.       A. Carpinteri, M. Corrado: “Dimensional analysis approach to the plastic rotation capacity of over-reinforced concrete beams”, Engineering Fracture Mechanics, Vol. 77 (2010), 1091-1100. (doi: 10.1016/j.engfracmech.2010.02.021)

 

6.       A. Carpinteri, M. Corrado, M. Paggi: “An integrated cohesive/overlapping crack model for the analysis of flexural cracking and crushing in RC beams”, International Journal of Fracture, Vol. 161, No. 2 (2010), 161-173. (doi: 10.1007/s10704-010-9450-4)

 

5.       A. Carpinteri, M. Corrado, G. Mancini, M. Paggi: “A numerical approach to modelling size effects on the flexural ductility of RC beams”, Materials and Structures (RILEM), Vol. 42, No. 10 (2009), 1353-1367. (doi: 10.1617/s11527-008-9454-y)

 

4.       A. Carpinteri, M. Corrado, G. Mancini, M. Paggi: “Size-scale effects on plastic rotational capacity of reinforced concrete beams”, ACI Structural Journal, Vol. 106, No. 6 (2009), 887-896.

 

3.       A. Carpinteri, M. Corrado, G. Mancini, M. Paggi: “The overlapping crack model for uniaxial and eccentric concrete compression tests”, Magazine of Concrete Research, Vol. 61, No. 9 (2009), 745-757. (doi: 10.1680/macr.2008.61.00.1)

 

2.       A. Carpinteri, M. Corrado: “An extended (fractal) Overlapping Crack Model to describe crushing size-scale effects in compression”, Engineering Failure Analysis, Vol. 16, No. 8 (2009), 2530-2540. (doi: 10.1016/j.engfailanal.2009.04.024)

 

1.       A. Carpinteri, M. Corrado, M. Paggi, G. Mancini: “New model for the analysis of size-scale effects on the ductility of reinforced concrete elements in bending”, Journal of Engineering Mechanics (ASCE), Vol. 135, No. 3 (2009), 221-229. (doi: 10.1061/(ASCE)0733-9399(2009)135:3(221))

Publications in national and international conference proceedings (the presenting author is underlined)

 

22.    M. Corrado, G. Anciaux, D. Scantamburlo, S. Laffely, M. Chambart, T. Menouillard, J.-F. Molinari: “Seismic safety evaluation of an arch dam with Akantu FE code developed at EPFL”, in: Proceedings of the 13th International Benchmark on the Numerical Analysis of Dams, September 9-11, 2015, Lausanne, Switzerland.

21.    M. Paggi, I. Berardone, M. Corrado: “A coupled thermo-electro-mechanical model for fracture in solar cells”, in: Proceedings of the 16th European Conference on Composite Materials (ECCM16), June 22-26, 2014, Seville, Spain.

20.    P. Cornetti, M. Corrado, A. Carpinteri, L. De Lorenzis: “A cohesive crack model approach to the edge debonding mechanism in plated beams” in: Atti del XXI Congresso Nazionale di Meccanica Teorica ed Applicata (AIMETA), 17-20 Settembre 2013, Torino, Italy, CD-ROM.

19.    M. Corrado, D. Villani, G. Ventura, A. Carpinteri: “Experimental evidences and numerical simulations of the scale-slenderness-steel amount failure transitions in RC beams”, in: Atti del XXI Congresso Nazionale di Meccanica Teorica ed Applicata (AIMETA), 17-20 Settembre 2013, Torino, Italy, CD-ROM.

18.    M. Paggi, M. Corrado: “Modelling of intergranular and transgranular cracking in polycrystalline silicon solar cells”, 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2013), June 24-26, 2013, Torino, Italy

17.    M. Corrado, P. Cornetti, A. Carpinteri: “Competition and interplay between different failure mechanisms in RC beams strengthened by FRP plates”, in: Proceedings of the 8th International FraMCoS Conference, Toledo, Spain, 2013, Eds. J.G.M. van Mier, G. Ruiz, C. Andrade, R.C. Yu, X.X. Zhang, CIMNE, Barcelona (2013), CD-ROM, Paper No. 562. ISBN: 978-84-941004-3-7

16.    P. Cornetti, M. Corrado, L. De Lorenzis, A. Carpinteri: “Edge debonding in FRP-strengthened concrete beams: An analytical approach based on cohesive crack model”, in: Proceedings of the 8th International FraMCoS Conference, Toledo, Spain, 2013, Eds. J.G.M. van Mier, G. Ruiz, C. Andrade, R.C. Yu, X.X. Zhang, CIMNE, Barcelona (2013), CD-ROM, Paper No. 561. ISBN: 978-84-941004-3-7

15.    G. Lacidogna, F. Accornero, M. Corrado, A. Carpinteri “Crushing and fracture energies in concrete specimens monitored by AE”, in: Proceedings of the 8th International FraMCoS Conference, Toledo, Spain, 2013, Eds. J.G.M. van Mier, G. Ruiz, C. Andrade, R.C. Yu, X.X. Zhang, CIMNE, Barcelona (2013), CD-ROM, Paper No. 543. ISBN: 978-84-941004-3-7

14.    A. Carpinteri, M. Corrado, G. Ventura: “Failure mode scaling transitions in RC beams in flexure: Tensile, shearing, crushing”, in: Fracture Mechanics of Concrete and Concrete Structures (Proceedings of the 8th International FraMCoS Conference, Toledo, Spain, 2013), Eds. J.G.M. van Mier, G. Ruiz, C. Andrade, R.C. Yu, X.X. Zhang, CIMNE, Barcelona (2013), pp. 17-29. ISBN: 978-84-941004-0-6

13.    G. Lacidogna, M. Corrado, A. Carpinteri: “Absorbed vs. released energy in the cracking process of heterogeneous materials under compression”, in: Experimental and Applied Mechanics, (Proceedings of SEM XII, June 11-14, 2012, Costa Mesa, CA, USA), Eds. C.E. Ventura et al., The Society for Experimental Mechanics Inc. (2012), Vol. 4, Ch. 35, pp. 303-3011 (doi: 10.1007/978-1-4614-4226-4_35)

12.    M. Corrado, P. Cornetti, A. Carpinteri: “Competition and interplay between different failure mechanisms in FRP-strengthened beams”, in: Atti del XX Congresso Nazionale di Meccanica Teorica ed Applicata (AIMETA), 12-15 Settembre 2011, Bologna, Italy, CD-ROM, Paper No. 347-1.

11.    A. Carpinteri, M. Corrado, G. Lacidogna: “Fractality of fracture patterns in compression”, in: Atti del XX Congresso Nazionale di Meccanica Teorica ed Applicata (AIMETA), 12-15 Settembre 2011, Bologna, Italy, CD-ROM, Paper No. 150-0.

10.    A. Carpinteri, M. Corrado, G. Lacidogna: “Structural analysis of tall buildings subjected to lateral loads: Effects of bracings of different height”, in: Proceedings of the 3rd International fib Congress, May 29-June 2, 2010, Washington, D.C., CD-ROM, Paper No. 398.

9.       M. Corrado, M. Paggi, A. Carpinteri: “Limits to plastic analysis design due to size-scale effects on the rotational capacity of plastic hinges”, in: Proceedings of the 3rd International fib Congress, May 29-June 2, 2010, Washington, D.C., CD-ROM, Paper No. 376.

8.       E. Cadamuro, M. Corrado, A. Carpinteri: “Size-scale effects on minimum flexural reinforcement in RC beams: application of the cohesive crack model”, in: Fracture Mechanics of Concrete and Concrete Structures (Proceedings of the 7th International FraMCoS Conference, Jeju, Korea, 2010), Eds. B.H. Oh et al., Korea Concrete Institute, Seoul (2010), 207-215.

7.       M. Corrado, M. Paggi, A. Carpinteri: “Cohesive-overlapping crack model describing the size-scale effects on the rotational capacity of RC beams in bending”, in: Fracture Mechanics of Concrete and Concrete Structures (Proceedings of the 7th International FraMCoS Conference, Jeju, Korea, 2010), Eds. B.H. Oh et al., Korea Concrete Institute, Seoul (2010), 183-190.

6.       G. Lacidogna, M. Corrado, A. Carpinteri: “A global analysis of tall buildings subjected to horizontal loads”, in: Atti del XIX Congresso Nazionale di Meccanica Teorica ed Applicata (AIMETA), 14-17 Settembre 2009, Ancona, Italy, CD-ROM, Paper No. 149.

5.       M. Corrado, A. Carpinteri: “Dimensional analysis of over-reinforced concrete beams in bending”, in: Atti del XIX Congresso Nazionale di Meccanica Teorica ed Applicata (AIMETA), 14-17 Settembre 2009, Ancona, Italy, CD-ROM, Paper No. 110.

4.       M. Corrado, M. Paggi, A. Carpinteri: “Size-scale effects on the ductility of reinforced concrete structural elements”, in: Proceedings of the 12th International Conference on Fracture (ICF), July 12-17 2009, Ottawa, Canada, CD-ROM, Paper No. T06.008.

3.       A. Carpinteri, M. Corrado, G. Mancini, M. Paggi: “Il modello della fessura coesiva in trazione e compressione per la valutazione della duttilità degli elementi strutturali in calcestruzzo armato”, Frattura ed Integrità Strutturale, No. 7, 17-28, 2009 (doi: 10.3221/IGF-ESIS.07.02); Atti del 17° Congresso dei Tecnici della Industrializzazione Edilizia (CTE), 5-8 Novembre 2008, Roma, Italy, 2008, Vol. 1, 89-98.

2.       M. Corrado, A. Carpinteri, M. Paggi, G. Mancini: “Improvement in the plastic rotation evaluation by means of fracture mechanics concepts”, in: Tailor Made Concrete Structures (Proceedings of the International fib Symposium 2008, Amsterdam, The Netherlands, 2008), Eds. J.C. Walraven, D. Stoelhorst, Taylor & Francis Group, London, (2008), CD-ROM, 541-546.

1.       A. Carpinteri, M. Corrado, M. Paggi, G. Mancini: “Cohesive versus overlapping crack model for a size effect analysis of RC elements in bending”, in: Fracture Mechanics of Concrete and Concrete Structures (Proceedings of the 6th International FraMCoS Conference, Catania, Italy, 2007), Eds. A. Carpinteri, P. Gambarova, G. Ferro, G. Plizzari, Taylor & Francis, London (2007), Vol. 2, 655-663.

Undergraduate textbooks

 

2.       M. Corrado, M. Paggi: “Metodo degli spostamenti. Fondamenti teorici e applicazioni strutturali – Seconda edizione”, CLUT, Torino, 2016, pp. IV+131. ISBN: 9788879924016.

1.       M. Corrado, M. Paggi: “Metodo degli spostamenti. Fondamenti teorici ed applicazioni strutturali”, Clut, Torino, 2013, pp. 118. ISBN 9788879923521.

Monographs

 

2.    M. Corrado: “Applicabilità dei modelli taglio-resistenti alle travi alte in calcestruzzo armato” (in Italian language), Master Thesis in Civil Engineering, Supervisor: Prof. G. Mancini, Politecnico di Torino, 2004.

1.       M. Corrado: “Effetti di Scala sulla Capacità di Rotazione Plastica di Travi in Calcestruzzo Armato”, (in Italian language), Ph.D. Thesis, Supervisors: Prof. A. Carpinteri and Prof. G. Mancini, Politecnico di Torino, 2007.

Abstracts in conference proceedings (the presenting author is underlined)

 

30.    M. Corrado, G. Mariggiò, S. Dalle Vacche, R. Bongiovanni, C. Louter: “A UV-cured functional coating to prevent glass stress corrosion”, Glass Performance Days 2019, June 25-26, 2019, Tampere, Finland.

29.    E. Gallyamov, M. Corrado, R. Rezakhani, J.-F. Molinari: “Experiments-based multi-scale modeling of the alkali-silica reaction in concrete”, FraMCoS-X: Fracture Mechanics of Concrete and Concrete Structures, June 24-26, 2019, Bayonne, France.

28.    R. Bongiovanni, G. Mariggiò, S. Dalle Vacche, M. Corrado: “UV-cured coatings for the protection of glass from stress-corrosion”, 15th Coating Science International 2019, June 24-28, 2019, Noordwijk, The Netherlands.

27.    M. Paggi, V. Carollo, M. Corrado, J. Reinoso,: “A unified variational approach to fracture in heterogeneous materials and composites”, XXII Convegno Italiano di Meccanica Computazionale e IX Riunione del Gruppo Materiali AIMETA (GIMC-GMA 2018), September 13-14, 2018, Ferrara, Italy.

26.    M. Corrado, V. Carollo, J. Reinoso, M. Paggi: “A novel computational model to study complex crack paths in dynamic fracture of heterogeneous materials”, XXII Convegno Italiano di Meccanica Computazionale e IX Riunione del Gruppo Materiali AIMETA (GIMC-GMA 2018), September 13-14, 2018, Ferrara, Italy.

25.    S. Dalle Vacche, S. Forzano, M. Corrado, R. Bongiovanni: “UV-cured coatings for the prevention of glass stress-corrosion”, European Symposium of Photopolymer Science, September 3-6, 2018, Mulhouse, France.

24.    M. Corrado, M. Colombo, C. Comi, J.-F. Molinari: “Multi-scale analysis of alkali-silica reaction-induced damage with thermo-mechanical coupling”, 10th European Solid Mechanics Conference (ESMC 2018), July 2-6, 2018, Bologna, Italy.

23.    G. Mariggiò, S. Dalle Vacche, M. Corrado, R. Bongiovanni: “Experimental assessment of the effectiveness of hydrophobic UV-cured coatings in protecting glass surfaces against stress corrosion”, IGF Workshop - Fracture and structural integrity: ten years of “Frattura ed Integrità Strutturale”, 4-6 June 2018, Cassino, Italy.

22.    M. Corrado, A.I. Cuba Ramos, J.-F. Molinari: “Multi-scale modelling of alkali-silica reaction-induced damage in concrete dams”, Atti del XXIII Congresso dell'Associazione Italiana di Meccanica Teorica e Applicata, 4-7 September 2017, Salerno, Italy.

21.    M. Corrado, M. Vocialta, J.-F. Molinari: “A cohesive element approach to fragmentation in tempered glass”, Atti del XXI Convegno Italiano di Meccanica Computazionale e VIII Riunione del Gruppo Materiali AIMETA (GIMC-GMA 2016), 27-29 June 2016, Lucca, Italy, pp. 91-92.

20.    M. Corrado, M. Vocialta, J.-F. Molinari: “Modeling of fragmentation in tempered glass with the cohesive element method”, European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016), 5-10 June 2016, Crete Island, Greece.

19.    A. Infuso, M. Corrado, M. Paggi: “Experimental and numerical investigation on the stress field induced by impact loadings in semi-flexible photovoltaic modules”, XXII Congresso Nazionale di Meccanica Teorica ed Applicata (AIMETA), 14-17 Settembre 2015, Genova, Italy.

18.    I. Berardone, M. Corrado, M. Paggi: “Numerical model for the prediction of the electric response of Solar Cells in presence of cracks”, European PV Solar Energy Conference and Exhibition (EUPVSEC 2015), September 14-18, 2015, Hamburg, Germany.

17.    M. Corrado, A. Infuso, M. Paggi: “Analysis of the stress field in photovoltaic modules due to impact loadings”, 6th International Conference on Mechanics and Materials in Design (M2D’2015), July 26-30, 2015, Ponta Delgada, Azores, Portugal.

16.    M. Paggi, M. Corrado, J. Reinoso: “A fully implicit computational approach to dynamic delamination under large displacements”, 6th International Conference on Mechanics and Materials in Design (M2D’2015), July 26-30, 2015, Ponta Delgada, Azores, Portugal.

15.    M. Corrado, J.-F. Molinari: “Numerical analysis of the effects of residual stresses in concrete”,  9th European Solid Mechanics Conference (ESMC 2015), July 6 - 10, 2015, Leganés-Madrid, Spain.

14.    M. Paggi, I. Berardone, M. Corrado: “A computational tool for advanced simulation of durability of PV modules”, 5th International Conference on Crystalline Silicon Photovoltaics (SiliconPV 2015), March 23-26, 2015, Konstanz, Germany.

13.    M. Corrado, M. Paggi: “Dynamic nonlinear debonding at interfaces in thin-walled layered systems”, 11th World Congress on Computational Mechanics (WCCM XI), July 20-25, 2014, Barcelona, Spain.

12.    M. Paggi, I. Berardone, A. Infuso, M. Corrado: “Electrical recovery and fatigue degradation phenomena in cracked silicon cells”, 1st International Symposium on Energy Challenges & Mechanics, July 8-10, 2014, Aberdeen, Scotland, UK.

11.    M. Corrado, M. Paggi: “Dynamic nonlinear crack growth at interfaces in multi-layered materials”, 20th European Conference on Fracture (ECF 20), June 30 – July 4, 2014, Trondheim, Norway.

10.    I. Berardone, M. Corrado, M. Paggi: “Quantitative EL image analysis towards thermo-electro-mechanical simulations in solar cells”, 4th International Conference on Crystalline Silicon Photovoltaics (SiliconPV 2014), March 25-27, 2014, ‘s-Hertogenbosch, The Netherlands.

9.       M. Paggi, M. Corrado: “Quasi-static and dynamic nonlinear crack growth at bi-material interfaces”, XII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XII), September 3-5, 2013, Barcelona, Spain.

8.       A. Infuso, M. Corrado, M. Paggi: “Recent progresses on modelling of cracking in polycristalline Silicon for photovoltaic applications”, CERMODEL 2013, July 10-12, 2013, Trento, Italy.

7.       M. Corrado, M. Paggi: “Dynamic behavior of finite thickness cohesive interfaces”, IUTAM Symposium on Materials and Interfaces under High Strain Rate and Large Deformation, June 17-21, 2013, Metz, France.

6.       A. Carpinteri, B. Gong, M. Corrado: “Hardening cohesive zone model for size effects in the necking and ductile fracture of metals”, in: Proceedings of ICTAM 2012, August 19-24, 2012, Beijing, China, CD-ROM.

5.       A. Carpinteri, M. Corrado, G. Lacidogna: “Fractal cracking pattern characterization in heterogeneous materials under compression”, in: Proceedings of ICTAM 2012, August 19-24, 2012, Beijing, China, CD-ROM.

4.       M. Paggi, M. Corrado, M.A. Rodriguez: “A multi-scale and multi-physics numerical approach to microcracking in photovoltaic laminates”, in: Proceedings of International Conference on Mechanics of Nano, Micro and Macro Composite Structures, June 18-20, 2012, Torino, Italy.

3.       G. Ventura, A. Carpinteri, M. Corrado: “A global cohesive-shear-overlapping crack model to represent the scale-slenderness-steel amount failure mode transitions in RC beams”, in: Atti del XVIII Convegno del Gruppo Italiano di Meccanica Computazionale (GIMC), 22-24 Settembre 2010, Siracusa, Italy.

2.       A. Carpinteri, M. Corrado, M. Paggi: “A stress-interpenetration constitutive law in compression for monotonic and cyclic loadings”, in: Proceedings of the IV European Conference on Computational Mechanics (ECCM 2010), Paris, France, 2010.

1.       A. Carpinteri, M. Corrado: “Application of Nonlinear Fracture Mechanics to the assessment of rotational capacity in reinforced concrete beams”, in: Proceedings of VII EPUSP Symposium, October 6-10 2009, Curitiba, Brazil.